Thank you so much for this video ! Exactly what I was looking for !! I would like to see a video of the same type of motorcycle with a crash cage already installed.

Great vid, but how in the world did you remove the cover of the tweeter to remove it? I cant seem to pry it out. Thanks

The Icon set is identical right down to the case $49 / Facom is manufactured by Stanley Black & Decker, and Icon… the same lol

What wind shield is that you have

Thanks!🙌🏻

I think both vids were extremely informative for wat I was concerned about. Keyboard warriors can eat a whole lot of deeks 👌

Excellent Video, helped me so much upgrading my Magnat vintage series. Thx!

👍👍👍👍

You are wicked smaat!

easy way to SCAM

If you place the bike on a pit stand ( any brand ) it will help better.

Thank you for the detailed video. ZX4RR here as well.

Halo ! Can I ask how do u know what is conductor and use a better quality one ? Tq

A great video on this topic ! I may have missed it, but what oil are you using? Thanks !

Link where you both that rear rack pls.. shout out from Dublin

Thanks a lot for this video, I have a 105mm F3.5 that had a ridiculously sticky clockwork mechanism. Very clear on what needed to be done and now it works perfectly.

I came across some bookshelf sonys with bi wiring on the back of em which really surprised me since they look like they were apart of an an all i n one system build quaiity seemed so-so but not terriable...Any info would be appreciated..Thanks

can we remove db killer from the stock exhaust of ZX4rr

This video was so helpfull, I finally understand the problem. For the people that do not want to adjust the problem with tape, during the process of fixing the warped bed problem and the help of this video I fixed the issue with the glass plate that came with the printer and this fixed it already I prefer a magnetic bed so I installed it on too the glass bed and the problem was gone without the use of tape😅

Does removing it void the warranty?

getting some new aftermarket fairings in a week or two was curious how the front headlight fairing came off hoping they look good once they arrive.

Man. Thanks for this. I was on the edge of getting one. I might just get a super sprint muffler now.

Thanks a lot this is very useful. Excited to see what else you are going to do next

Thanks for making this! you helped me finally fix a lens I accidentally broke (2 years ago 💀) by somehow pulling the lenses and its helical gear straight out of the housing.

OMFG, finally a viable solution! Thank you, dear algorythm for suggesting this to me!!! And thank you for coming up with this solution, at least you're the first person I encounter with a dedicated video to this issue. May the FDM be with you.

My 530i 20 years old and 400,000 miles, the plastic filter cap is still fine.

Thank you for the excellent video

Is it normal to leak oil

I can't believe you did not razzle dazzle at the end. If you know you know.

Those are real back roads, i.e., not even paved.

Note - there absolutely IS a lift point in the front center - it's the same for the convertible also - I've had both and I own a Z4 coupe now. It's under the indentation of the aluminum panel - directly behind that aluminum panel is the steel cross member that supports the front weight - I've used it many times on the coupe thus far to jack it up from the center.

Very helpful video. This skid plate works great on my 2014 Honda CRF250L. Some very large rocks have deflected off this plate with no damage to the plate or bike.

Excellent video with clear instructions. I installed the red Acerbis X-Factor handguards on my 2014 Honda CRF250L and they work great. I smacked some thorny tree branches on my last ride with no injury to my hands.

Honestly it looks pretty good for less than $100. The sound is not bad. Probably less weight than original. Doesn't seem like an awful product at all

bought this exact model for my 150cc gy6 and I’ve had no issues. It really isn’t a bad idea if you’re just looking for noise control and flow control. If you want to seriously see performance custom exhausts are the way to go. Pretty good piece though and sounds good too.

Just stick with OEM and replace it every 5th oil change if you want piece of mind, It's only £22 here in the UK!

First, thanks for very thorough and detailed video - this kind of content is very useful! I found the video while searching if the Reckless (V4.0 nowadays) would fit my NX500, that I am about to pick next week. Seems quite convincing, even though this is earlier version. The only thing is that I haven't ordered the luggage rack for my bike so I'm wondering if the pillion handle bars will provide possibility to strap the system well enough..

thank for the ride amazin bike i will have one in one month !!!

Thank you for posting this video. I found this more helpful than another video with guys wearing official Ohlins shirts because you show the all the steps required in very good detail. Yes, it is a very tight fit to get the reservoir through the frame and drive gear area, but can be done without scratching the nice gold finish. The tape tip on the wrench to hold the top nut for the shock worked well since I did the job by myself. I got such a good deal on my gently used 2014 CRF250L, it was worth the money for me to install the Ohlins rear shock and rebuild the front forks with the Ohlins fork kit. What a transformation! No more pogo sticking and bottoming out and the handling is now awesome. With the Ohlins suspension, I can now safely ride technical trails at a fast and fun pace. With all the mods I have done, all in I have spent less than 50% of the cash it would take to buy a high performance dual sport bike, and I ride the same trails as riders with very expensive bikes. If you are ever in Sedona, AZ, look for me riding Red Dawn.

How do you over torque it lol just put it on hand tight

If you remove the main spring, would the knife simply work as a manual open button lock?

Great video pal

Its nice at speeds under 50mph but no good at higher speeds. And mine started cracking after riding it at 65+mph in windy conditions.

The resistor and cap across the woofer is a Zobel network to compensate for the impedance rise at higher frequencies due to the inductance of the voice coil. That allows the inductor (this would be a 1st order crossover for the woofer) to see a flat impedance across the load at higher frequencies and allow it to work as calculated to block them. Otherwise you get less effectiveness from the inductor as frequency rises and it's counter productive.

This video helped me eliminate the crappy plastic cover, although I ended up not running the ball in the check valve as i could not get it sit properly. Was this a good idea? Great video and excellent documentation 👍

Hi thank you for your very excellent insight Clearly cheap and small speakers have limitation But as satellites they could work quite fine It is important to cut them below 150Hz more or less and send the remaining range to a proper woofer in a separate box The result can be surprising I did something of the kind in the past with a couple of Mission speakers and i was amazed Finally i ruined the speakers using them full range at too high power They had a small coil ... not for super power But used cut in the lower range they sounded fantastic

This guy would have a panic attack if he took my knife apart

Awesomeness