What is good with the oil pan hardware how am I suppose to tighten any of the bolts in the front of the oil pan to spec ? There no room
@Ghost_underscore55610 күн бұрын
I'm going to support you guys for the free once I have my 350z build all I want is my 350z to get the Enjuko Racing stickers on my car lol
@Ghost_underscore55610 күн бұрын
The website will pop off Just need more content with ls350z Like drifting etc
@KaleSSalad-000113 күн бұрын
Now put a turbo in it
@Popsm0ke14 күн бұрын
Can anybody tell me how thick the engine- transmission adapter is ? I have brain C and don't have $$to burn but would like to have a little fun while i can
@verginsergin17 күн бұрын
Does Enjuku take on customer builds? This I didn't know. 😁
@davidsimmons358018 күн бұрын
Hey can this be done with a automatic transmission
@BlinkkHD25 күн бұрын
Where did you mount the can lambda modules?
@briannareid9423Ай бұрын
What year build is this
@ZacharyPacheco-yu9ngАй бұрын
Just wondering exactly what power steering pump is on there?
@Vgk362 ай бұрын
I fell in love when he said he wanted his AC to work SOLD!!!!!
@TurboV8boi3 ай бұрын
I wonder what clutch that was.
@MIKESGREATSTORY3 ай бұрын
Can this be used with stock ecm
@halcongr3 ай бұрын
Way not the 5.6 v8 Nissan?
@randydrifts4 ай бұрын
I did this swap and my shifter feels realy tight for 1-2 very loose for 3-4 and very tight again for 5-6 and R is almost impossible to get into
@AP-wu1rv4 ай бұрын
Does this work with auto transmission? I have a G37x auto
@ItsCodaz3 ай бұрын
You’ll need an auto trans that works with the ls. I don’t think any Nissan auto trans will work or even hold up to the hp capabilities of the LS motor
@countryboy417894 ай бұрын
Damn this channel could've been Donut Media. That's sad.
@duece2alex4 ай бұрын
What ever happened to this project?! I was waiting for it and it never came 😭😭😭
@randydrifts4 ай бұрын
the stock driveshaft will work or no?
@isrperformance49034 ай бұрын
You would need to purchase one of our driveshafts if you are using our adapter kit and a CD transmission because we move the transmission rearward in the chassis for better engine fitment and weight distribution.
@nathanaelaudate78455 ай бұрын
Can you do a video with an rb26 swap on 350z?
@Drake-ph4zc5 ай бұрын
if you use the link wiring harness do you need a different ecu or use the stock one?
@dumpsterjedi93235 ай бұрын
Is that fuel pump enough? It's specifically for a z/g, but doesn't the ls require more psi than these cars? Or do you just compensate in the tune?
@Dougdea6 ай бұрын
Where did you get the fuel return line at?
@ItsCodaz6 ай бұрын
Wish there was a parts list for the entire Fbody accessories. Looks like most is from summit. Maybe just a folder of all the links or part numbers would be a super big help...
@leonardodeledda39526 ай бұрын
Will this work for a g37 coupe?
@Cirones_garage6 ай бұрын
Amazing video, you’re literally a life saver!!
@jairohernandez96286 ай бұрын
What are the option u put when ordering the edu ??
@ashxc6 ай бұрын
too bad Rutledge has the wrong year xB
@VB100-6 ай бұрын
Would the heat from the headers not affect the racks? bout 2inches away from what could be potentially red hot pipes depending on the drive.
@TheGuruStud7 ай бұрын
Step by step video how to waste thousands 😂 Actual swap steps- Step 1: buy 2016+ maxima engine for $500 Step 2: make engine mount adapter bracket Step 3: buy used midmount turbo kit There is no step 4. You now have 550whp reliable Z using almost entirely off the shelf Z parts that can be had cheap on marketplace and everything actually works unlike LS swaps unless you put your house up as collateral.
@tescolonggrain6 ай бұрын
2016+ Maxima uses VQ35DE which already comes ina 350Z and has a 450 bhp stock internals limit..? Are you autistic
@TurboV8boi3 ай бұрын
I mean.. you'd still have to install it all, do the fuel system, buy an ecu/wiring harness, get it running , get it tuned. That'd at least be step 4-8 and it'd still be just as difficult and cost as much money as a LS swap.
@ChrisSickich7 ай бұрын
Wish your web sight would tell me a delivery estimate I’m tryna to buy steel brake lines and I need them before the first
@EnjukuRacingParts7 ай бұрын
We would recommend calling in to speak with a customer service rep at 352-241-8399 or e-mail [email protected] and we can check stock or order ETA's for you
@Sidewayzrik7 ай бұрын
This uses stock rad and stock fans?Are they sufficient enough.
@EnjukuRacingParts7 ай бұрын
you can use stock rad and fans, depending on your engine configuration and what you were using the car for you may want to upgrade to a better rad and fans though.
@conradsealy96037 ай бұрын
Considering there are SR20 powered cars doing 6 second passes in the quarter mile and no ka powered cars doing the same Id say the SR20 has more power potential than the SR20. Cant say Ive seen any ka powered car winning at time attack at Tsukuba or World Time Attack. But there are cars that held lap record tht are SR20 powered. Can anyone deny what I said? Prove me wrong.
@AEspi-qq8lb8 ай бұрын
Wow that was such a great job 😍😍💪🏽🙌🏽
@bryanroldan9948 ай бұрын
Dope!!!! Same as ls3???? I need inspiration!!!! And parts...lol
@peterpann96198 ай бұрын
The conversion parts are very expensive.
@NickBerte4028 ай бұрын
We need a video of you ripping on this thing for a few runs or something! I wanna see & hear it in the wild
@Hafu350z8 ай бұрын
This video has been the Bible on swaping the Ls into the z I watched this video like 1000 times already. Pretty much a pro now and taking any questions lol
@alexsierra48785 ай бұрын
Are you able to LS swap an automatic transmission 350z or G35?
@AP-wu1rv4 ай бұрын
@@alexsierra4878my same question dude I got a G37x Auto lol
@alexsierra48784 ай бұрын
@@AP-wu1rv I’ll do you a favor dude. I’ve talked to a couple of people including wiring specialties. The only way to have an auto LS swapped G is to have a 4L60E or a 4L80E. Have a custom driveshaft, adapter plate and a custom wiring harness to make it work
@whalecoooter3 ай бұрын
@@alexsierra4878 and the shitty part abt that is 4l60e are so ass. but cheap to rebuild.
@ctford27Ай бұрын
Will that stock 5sp hold the power of an LS engine?
@jairohernandez96288 ай бұрын
Can u provide the link for the ecu and wiring harness
@EnjukuRacingParts8 ай бұрын
You can see the Wiring Specialties Pro Series harness for Link ECU and DBW throttle here : www.enjukuracing.com/products.php?product=Wiring-Specialties-LINK-Xtreme-LS3-%7B47%7D-VORTEC-4th-Gen-58x-DBW-Wiring-Harness-for-Nissan-350Z-%252d-PRO-SERIES
@dr.storm94769 ай бұрын
But what was total cost in all the parts?
@jefffinke822510 ай бұрын
Thanks alot for doing this man. Much appreciated
@rahanibacarra572011 ай бұрын
How much all the cost of this
@ephraimflash246311 ай бұрын
Why don't y'all equip these cars with multi ECU's, if such a thing does not exist then why not design one..., 👀we like seeing theze cars in the streets hommies... But driving not on trailer units... Danko... Genesis
@bruh2steezy45411 ай бұрын
Was the pilot bearing used from the kit or a factory chevy one?
@EnjukuRacingParts8 ай бұрын
You need to use the adapter pilot bearing provided in the ISR adapter kit
@toddspaulding183211 ай бұрын
freaking cool
@ThicccBanana11 ай бұрын
Kinda lame isr makes a 1 peice driveshaft for ls swaps for only $400 but for a vq model it's $800 😭
@trentdawg28329 ай бұрын
Kinda….more like SUPER!!!!
@lincolngunn914211 ай бұрын
Hey bro love your video, Q: thinking of doing a LS swap in a g37 does enjuku carry a wiring harness for it…..
@Not_george_michael11 ай бұрын
Cant wait for the 370/g37 to get this treatment
@ColeParkerrr11 ай бұрын
What harness is that? It looks like it plugs directly into the nissan ECU? Can we get a parts list on your website or something?
@EnjukuRacingParts8 ай бұрын
It is a Wiring Specialties conversion harness to utilize a Link ECU and a DBW throttle, you can see it here : www.enjukuracing.com/products.php?product=Wiring-Specialties-LINK-Xtreme-LS3-%7B47%7D-VORTEC-4th-Gen-58x-DBW-Wiring-Harness-for-Nissan-350Z-%252d-PRO-SERIES
@SK8R6593 Жыл бұрын
Can you please provide link of the oil filter adapter kit you guys used??
@EnjukuRacingParts Жыл бұрын
That should be release by ISR Performance soon, we were sent a prototype to test out and provide feedback on. Keep an eye out on our website in the next month or so :)
@EnjukuRacingParts8 ай бұрын
enjukuracing.com/products/isr-performance-oil-filter-relocation-kit-350z-g35-with-isr-ls-swap-kit.html for the filter relocation, or www.enjukuracing.com/products/isr-performance-oil-filter-relocation-and-cooler-kit-350z-g35-with-isr-ls-swap-kit.html for the filter relocation and oil cooler.