Nicely done! Now go get some tissue! Lol, I subbed anyway! Keep on crawlin'!
@motododo4626Ай бұрын
Hahahaha I know bud man the allergy season was in full swing alot better now. The pine trees poof that yellow dust and it's terrible 😂
@TrokaRC2 ай бұрын
Sick mods.
@motododo46262 ай бұрын
Hey bud thanks the redcat is a sick platform really loving it. Sadly it's rekindled my addiction and now my wallet is hurting again hahahahaha.
@You_no_viking3 ай бұрын
You can get a flysky receiver and bind it to the stock radio under 20 bucks...i believe its protocol 2a
@motododo46262 ай бұрын
I actually ended up getting a injora mb100 and a meus 87t I'm loving it so far. But I may still go brushless. But I did end up getting a flysky
@harryfp14944 ай бұрын
I cut every other lug on my tires and e600 a couple pieces of led to the front axle I angled the skid and lifted the motor up a little bit with a spacer like 2fmrc recommends and it’s not to bad I also angled my shocks a little better and it’s not a bad little rig man I like crawling it thanks for the video ❤
@motododo46264 ай бұрын
Heck yeah thanks for watching it! I got some injora solid brass rims on the way and 64mm hyrax clones from injora. I just got my 64mm yellow and green inserts in today as well as trx4m brass hex hubs that fit great.
@harryfp14944 ай бұрын
@@motododo4626 I’m considering putting it on a hobby plus evo pro chassis rn I have my evo pro sitting here but idk if I wanna take it apart to try that but I’m probably going to buy a new chassis for it and try it
@motododo46264 ай бұрын
It could definitely be alot lower for sure. Even still I think for the money they did great. I think where they are actually making money is the brass and alloy goodies hahahaha get people to buy the truck cheap and sell expensive brass lol
@harryfp14944 ай бұрын
@@motododo4626 update I tried putting it on a hobby plus chassis . It won’t work the shocks are to far in board for that to happen . I suppose if you could pinch the hobby plus frame the same way in a break it would work just fine . But without that the axles geometry won’t let it work . Also as far as out of the box it’s a good trail rig and it’s better than the trx4 but it’s not designed well as far as the axles go and it’s also not laid out well as far as shock placement and things like that also the skid is really just kinda weird and outdated like a losi micro
@motododo46263 ай бұрын
Yeah I skid trhough me off I had the original losi micro crawler came in silver or black looked like an old 2001 Ford f150 lol. But yeah I like all my rigs but this redcat seems like something I could put some cash into and make a little beast.
@JeepBully4 ай бұрын
Get part 10234. It’s the shock extension they yaw use in the rear. Put them in front and it levels out the car and makes us handle way better. My tire was also not glued. Easy fix though
@motododo46264 ай бұрын
Yeah idk what happened with the QC on the tires but kinda wierd no biggy though haha. But yeah I was thinking of removing the one in the rear because the maxx v1 shock make it sit high and stiff. But puting that bracket in the front would be a huge plus
@bRad966994 ай бұрын
Sc1 will help with the faded black plastics. Good stuff to have around.
@motododo46264 ай бұрын
Oh yeah it is really good stuff I used it only once on some old plastics and it kept them from getting eaten by the sun
@krzysztofkuczynski65724 ай бұрын
Witam cie z polski jakie masz na kodiaku oponki jaki rozmiar i model musze zmienic i sie zastanawiam nad maxxis big horn 26cali.pozdrawiam
@motododo46264 ай бұрын
These are cheap sunf brand tires but they work really well
@user-fz7sz6og6c5 ай бұрын
Я купил не могу усилить раскажите про редуктор
@motododo46265 ай бұрын
There is a mechanism on the inside that allows you to tune it but I never really tried messing with it.
@user-fz7sz6og6c5 ай бұрын
Hello ! Делайте пожалуйста тбзор как усилит ету винтовку ???
@motododo46265 ай бұрын
It doesn't do much besides help the magazine cycle proper. I had issues with the magazine snagging and jamming
@JohnGreyman6 ай бұрын
Great video. I'm in the market for a cv. Where did you find it for $400?
@JohnGreyman6 ай бұрын
@@motododo4626I tried to message you on Facebook and it says I can't because you don't allow messages
@JohnGreyman6 ай бұрын
@@motododo4626 did you see that I tried to message you on FB but your account doesn't allow non friends to message you and you have your friends turned off so I can't even friend request you.
@motododo46265 ай бұрын
Figured I'd update my comment. Sold the clutch. But just keep your eyes peeled on ebay. And sometimes pictures don't match description but pay attention to the part number it is always correct.
@JohnGreyman5 ай бұрын
@@motododo4626 thank you. Yeah I tried to reach you on FB Messenger but your profile doesn't allow for messenger messages. Hope you keep this video up to help others.
@motododo46265 ай бұрын
@@JohnGreyman damn man I'm sorry. Yeah it won't let anyone message me it auto deny everyone it's ridiculous. But if you find one and need help I got loads of advice.
@brorjordas19792 жыл бұрын
Randomly poor pellet-barrel alignment.. And this aint even a Sig Sauer replica product.😁😁 A damn good fix/improvement.👍🏻👍🏻
@motododo46267 ай бұрын
Thank you bud yeah I was getting really irritated dry fired so many times thought mag was dirty or frozen from the cold but I studied it a bit and seen what was happening. I lost so many shots on squirrels it was insane.
@brorjordas19792 жыл бұрын
Too few likes has this video series gotten. Things like these make all the difference for tinkerers like me.. (And I do not even own a Reign.. (yet at least).)
@motododo46262 жыл бұрын
Man it's a really good rifle probably the best quality and build I've had for that price range. And the accuracy was intense. Definitely a go to for small game and I even adjusted hammer spring for more fpe and took koyotes
@brorjordas19792 жыл бұрын
@@motododo4626 Yea. I fell for the looks of the Reign by the very first picture I got to see of it. I'm a fan of them more tactical looking PCPs myself - and do this one look nice imo. And is compact and apparently light in weight. The plastics does not bother me at all. If wanna have a longer version - then just add a suppressor. But way sweet that it is compact. Gotten to see and hear of it much by now, since many now made videos of it. It just costs for me about €950 - so I have not yet really gotten myself to buy one. But really concidering it.
@bansheemania16924 жыл бұрын
Are they Feeders for something.. I Do Have a 15yr old Tiger Oscar and She's Viscous...
@motododo46264 жыл бұрын
Yup i was breeding them and in 3 years i had over 300,000 and 5 totes each tote weighed in at about 45 pounds worth of roaches i was selling them making loads of cash and they were feeders for my numerous reptiles and fish. They are super easy to breed but you need to be very careful for grain mites. I lost the whole colony to them. The are all over the tractor supply food bags so beware.
@Pets-md6zv9 жыл бұрын
the knifefi sh is in to small of a aquarium
@motododo46268 жыл бұрын
im sorry I didnt see your comment sooner, I know it was a small aquarium I had ordered a 175g fiberglass structure pond for my basement but it kept getting back ordered so he was stuck in that for a little while but the big guy ended up going to a better home a man with a 400 gallon tank made of plywood came and got him. I feel better now knowing he is in a tank only him and plenty of room.