Using Luxpower SNA5000, and 2 Hubble AM-2 batteries, the handbook of Luxpower does not expressly detail the CAN buss wiring. Is the Inverter connected IN SERIES in a RING FEED configuration with the 2 or more batteries?
@LUXPOWERTEKКүн бұрын
Hi Sir, thanks for your reaching out, please refer to your battery usermanual for the communication oof batteries. Our inverter can work with 48/51.2V battery, if you use batteries in series, please ensure that the total voltage of the battery system is equal to 48/51.2V. If you need more help about our inverter, kindly let us know.
@takudzwanyamakanga80014 күн бұрын
Anyone to answer.. I have a leupower inverter and a elf bulb lithium battery.. When the installer installed he told me the communication cable doesn't matter and it is not necessary he did not put it on.. Everything is working but the inverter doesn't show battery % and on battery type it shows lead acid.. Can i change these options on the inverter without the communication..cabble will there be any problem?
@takudzwanyamakanga80014 күн бұрын
Anyone to answer.. I have a leupower inverter and a elf bulb lithium battery.. When the installer installed he told me the communication cable doesn't matter and it is not necessary he did not put it on.. Everything is working but the inverter doesn't show battery % and on battery type it shows lead acid.. Can i change these options on the inverter without the communication..cabble will there be any problem?
@LUXPOWERTEK4 күн бұрын
Hi Sir, sorry for the problem you met, Do you have the battery communication cable in hand now?And could you share us with your SN? Our engineer will check your inverter status first and help you to solve the problem.
@BafanaMasinga8 күн бұрын
what about volta stage 1 5kw battery - which battery band should i select?
@LUXPOWERTEK5 күн бұрын
Hi Sir, Thank you for your reaching out. Do you know what BMS protocol do Volta Stage 1 use? If they use the protocol of Pylon, you can choose the brand for item 2.
@yur4311 күн бұрын
I love Luxpower for its convenient application and successful integration into HomeAssistant. Credit the author of the integration, he deserved it.
@renatozeppieri787311 күн бұрын
Non va app
@LUXPOWERTEK11 күн бұрын
Hi Sir, we apologize for the bad experience you encountered. Could you please share more details with us? We will do our best to support you in resolving the problem.
@jtindisa15 күн бұрын
I want my Luxpower to charge the battery to 100% and then continue using the grid only. However, whenever it gets to between 90% and 100% it starts using the battery even when the grid power is working.
@LUXPOWERTEK14 күн бұрын
Hi Sir, thanks for your reaching out. You can set the working mode to be AC charge with the time during 00:00~23:59.
@senzomalaza462216 күн бұрын
Hello, can you do the settings on the unit it self? Cause i see there are alot of settings when using software.
@LUXPOWERTEK15 күн бұрын
Hi Sir, thanks for your reaching out, yes, users can make settings on our monitoring platform and LCD screen.
@chillipaste218319 күн бұрын
I've just got in a LuxPower for repair. Seems pretty much the same circuit board as a Voltronic. IGBTs blown plus the optocoupler. Dang! Will you be able to supply a circuit diagram (component level)?
@LUXPOWERTEK16 күн бұрын
Unfortunately, we are unable to provide the circuit diagram as it involves our product design. If you need to repair the inverter, please contact your supplier. Additionally, since these products have many similar functions, it is normal for the circuit boards to look similar. However, we still cannot provide the design diagrams of our circuit boards. We appreciate your understanding. If you have any further questions, please email us at [email protected].
@chillipaste218316 күн бұрын
@@LUXPOWERTEK Many thanks for your reply. Customer scrapped the unit and bought another brand of inverter where repairs are possible. Not your fault but luxpower just went to the very bottom of recommended brands. But thank again for replying.
@LUXPOWERTEK15 күн бұрын
@@chillipaste2183 Hi Sir, thank you very much for sincerely informing us of this news. Although it is not the best news for LuxPower, we greatly appreciate your feedback and letting us know the real situation. For some components, such as MPPT boards and control boards, we do offer replacement options. Could you please let us know the region where your customer is located? This is not to collect any personal information but rather to facilitate our discussions with our distributors on how we can improve our service quality. Thank you again for your valuable feedback.
@sonlevan864519 күн бұрын
Luxpower is one of the best in after sales services, anytime I have issue with my inverter, I contacted the expert in China and they are very professional and fixed issue very fast, Luxpower also provide the best application
@jonathanmariscal696922 күн бұрын
I like this Inverter.! Tested!❤❤
@fullyelectric25 күн бұрын
This is great content and one of the best explanation of how a hybrid or grid-tie inverter with Zero export enable or sell back disabled functions, 28:05 to 31:49 very good question and detailed answer! To sum it up basically the CT’s tells the inverter the load going into the main panel and it will back-feed the main panel with only that amount of energy (if it can) and the rest of your PV power is turned down if you do not have batteries or your batteries are full, your arrival only produce the amount of energy the inverter calls for to feed or back-feed your loads.
@LUXPOWERTEK16 күн бұрын
Thank you for your feedback and detailed summary!
@rudzon28 күн бұрын
It would be very convenient (and for some people even a purchasing decision) if Luxpower inverters had a native Home Assistant integration. Thanks
@LUXPOWERTEK28 күн бұрын
Hi Sir, Thank you sincerely for your suggestion. We are currently working on integrating with some home assistance apps. Let's look forward to the success of this integration.
@SikelelaVunguvungu29 күн бұрын
Thank you for the information. However, I have a challenge of not being able to take my laptop to sight to do these types of settings. I would really appreciate it if you guys did a video where we the installers can learn to set up these programs on the inverter rather than using an app. With your competitors, we are able to do the settings online. For example Growatt, Deye and Sun-Sync we can do the settings on the inverter then the client is the one that can monitor and make changes according to their preferences and understanding. With Luxpower it seems as of everything is done remotely which is tedious for some of us.
@LUXPOWERTEK28 күн бұрын
Hi Sir, thank you for your feedback and suggestions. With Luxpower, settings can also be adjusted on the LCD screen. We have forwarded your suggestion to our tech support department, and they may organize training on how to use the LCD screen for settings.
@waltersabellico849629 күн бұрын
Cerco di parlare con assistenza non risponde
@LUXPOWERTEK28 күн бұрын
Hi Sir, could you please share us with your SN? We will provide the support to solve your problem.
@carlossantini29 күн бұрын
120/208 (WYE Star) configuration is available with just one 12k inverter or you need more than one? Is this inverter is able to connect "closed loop" with EG4 LL V2 rack batteries?
@carlossantini29 күн бұрын
120/208 (WYE Star) configuration is available with just one 12k inverter or you need more than one? Is this inverter is able to connect "closed loop" with EG4 LL V2 rack batteries?
@carlossantini29 күн бұрын
120/208 (WYE Star) configuration is available with just one 12k inverter or you need more than one? Is this inverter is able to connect "closed loop" with EG4 LL V2 rack batteries?
@carlossantini29 күн бұрын
120/208 (WYE Star) configuration is available with just one 12k inverter or you need more than one? Is this inverter is able to connect "closed loop" with EG4 LL V2 rack batteries?
@LUXPOWERTEK28 күн бұрын
Hi Sir, thank you for reaching out. One inverter can output two phases. If you need to output three phases, at least two inverters must be connected in parallel.
@LUXPOWERTEK28 күн бұрын
Hi Sir, sorry for missing one question, our inverter works with 48V/51.2V low voltage battery.
@carlossantini29 күн бұрын
120/208 (WYE Star) configuration is available with just one inverter or you need more than one? Is this inverter is able to connect "closed loop" with EG4 LL V2 rack batteries?
@fullyelectric25 күн бұрын
All LuxPowertek LXP supports EG4 LL and EG4 LP4 with upgraded firmware
@LUXPOWERTEK22 күн бұрын
Luxpower inverter is connected to a 48V battery, please pay attention to the voltage of the EG4 battery you purchase.
@ChristopherYayockАй бұрын
I want to configure my inverter so that when my battery state of charge (SOC) drops to 10%, the inverter stops supplying power, and the grid takes over to supply the load without charging the battery. The battery should only recharge using solar photovoltaic (PV) panels. How can I achieve this setup?
@LUXPOWERTEKАй бұрын
Hi Sir, thanks for your reaching out, could you please tell me which model or SN do you use? Different model has different working modes and settings.
@pietpoggenpoel2159Ай бұрын
Huaght taugh that thing
@pietpoggenpoel2159Ай бұрын
Wow this makes me horny this beast... well-done... to lux keep it up
@dsconnctАй бұрын
May I know the type of batteries that are in these bad boys?
@LUXPOWERTEKАй бұрын
We use the Lithium-ion battery in it, the default capacity we packed is 10kWh.
@dsconnctАй бұрын
@@LUXPOWERTEKIs that the same as LFP LifePO4 batteries?
@LUXPOWERTEKАй бұрын
@@dsconnct Yes, Lithium-ion is LFP (LiFePO4)battery
@dsconnctАй бұрын
So excited for this! Looking forward to testing it at home!
@TheWeenerboyАй бұрын
Agreed this needs to be ASAP, would love to see this before month end
@asklyarrАй бұрын
When notifications will be available on iOS?
@LUXPOWERTEKАй бұрын
Hi Sir, IOS will be released in these two weeks, thank you for your attention.
@RaksmeilongАй бұрын
The timezone is not right for our region. How to change it?
@LUXPOWERTEKАй бұрын
Hi Sir, you can enter to your user center page to change the timezone.
@KhomotsoMohale-k5lАй бұрын
What Is meaning of solar panels that's needed ?
@Prakashsachan415Ай бұрын
Why my inverter shows offline from today 5 am .
@LUXPOWERTEKАй бұрын
Hi Sir, Thanks for reaching out. Please send us your SN, we will check your inverter status.
@Sivakorn.GardenАй бұрын
Parallel question Can SNA 6k WPV be parallel to SNA 5k WPV?
@LUXPOWERTEKАй бұрын
Hi Sir, Sorry for this, SNA 5K and 6K have different control logic, so they cannot be parallelled in one system.
@Sivakorn.GardenАй бұрын
@@LUXPOWERTEK thank you
@edingonzalez7402Ай бұрын
Hello i am from Belize i would like to recieve webinar notices.
@LUXPOWERTEKАй бұрын
Hello sir, thank you for contacting us, we have a whatsapp support group, if it's convenient for you, please send your whatsapp number to [email protected] and we will invite you to join the group, we also often post some similar webinar announcements in the group.
@bobnle2844Ай бұрын
PV input 17A. Mppt range 120-385v 385*17=6545 Watt. Why power limited 4000 watt per input? If i connect 10 panels * 465wt (400v open circuit voltage) on PV1 It will be work normally?
@LUXPOWERTEKАй бұрын
Hi Sir, Thank you for reaching out. Regarding your first question, we have designed a 4kW limit per MPPT due to heat management requirements. If the power exceeds 6kW per MPPT, the inverter will operate at a higher temperature, which can damage the unit. Therefore, we limit the PV power input per MPPT to ensure safe and efficient operation. For your second question, if you connect a total of 4.65kW input to PV1, our inverter will automatically limit the input power to a maximum of 4kW.
@GiovanniAntАй бұрын
please post link to shop wifi kit LXP Hybrid 3-6k I don't have.
@LUXPOWERTEKАй бұрын
Hi Sir, thank you for contacting us, please let me know your city and we will provide you with the nearest distributor for your wifi kit.
@GiovanniAntАй бұрын
@@LUXPOWERTEK Olbia Italy
@LUXPOWERTEKАй бұрын
@@GiovanniAnt Hi Sir, please contact our after-sale center in Italy for assistance, Davide +39 0287159458 [email protected]
@mobileformat2264Ай бұрын
How do I restore my dongle settings? Accidentally reset it to factory settings through its interface.
@LUXPOWERTEKАй бұрын
Hi Sir, you need to re-configure the dongle, which type do you use, and please leave your email here, we will send the dongle manual to you. Thank you
@renatozeppieri787311 күн бұрын
Non va lapp@@LUXPOWERTEK
@TitusMoganeАй бұрын
Hi, I am struggling to set solar charging batteries bcz batteries are only charging on Ac, when I connect solar panels only doesn't show charging, I am using luxpower inverter, 5 x545w panels, lithium battery,
@LUXPOWERTEKАй бұрын
Hi Sir, Apologize for the delay reply, I wonder that you wanna to set for PV charge priority, right? Please share us with your inverter SN, we will check your settings. Thanks
@TitusMoganeАй бұрын
@@LUXPOWERTEK yes I need PV to be first priority to charge batteries
@LUXPOWERTEKАй бұрын
@@TitusMogane Hi Sir, For our SNA series, you can set the AC first working mode to achieve this function. In this mode, the AC will power the load first, and any excess power will be used to charge the battery. Hope this reply can solve your question.
@LUXPOWERTEKАй бұрын
Sorry Sir, I forgot one setting on hybrid setting section, please also enable "PV & AC Take Load Jointly"
@lawrenceharris18192 ай бұрын
A year ago I spent quite a bit of money installing the Luxpower batteries. However, I now regret it. They do not live up to their promise for one reason. The controller - Luxpower controller - is far too sleepy. It takes up to a minute or more before it considers switching. My records show that it really sleeps on the job. This costs a lot of money. Avoid!
@LUXPOWERTEKАй бұрын
Hi Sir, We are very sorry to hear about your experience. We would like to clarify that Luxpower has not manufactured any batteries. Based on your description, it seems you might be referring to our inverter. Could you kindly share your location and the inverter's serial number (SN) with us? We will check the status of your inverter and provide assistance. For Luxpower inverters, the typical on/off switch time is around 20 milliseconds.
@lawrenceharris1819Ай бұрын
@@LUXPOWERTEK I'm happy to give you this information - how do I do it privately! FWIW yes, I was 'sold' on this 20ms spec. My reality is somewhat different. If necessary I will post it here.
@LUXPOWERTEKАй бұрын
@@lawrenceharris1819 Please send your inverter information to : [email protected], we will try best to solve your problem and clarify any misunderstandings.
@dsconnct2 ай бұрын
Looking forward to the training video for the Eco Beast!
@dsconnct2 ай бұрын
Looking forward to the training video for the Eco Beast!
@dsconnct2 ай бұрын
Looking forward to the training video for the Eco Beast!
@LUXPOWERTEKАй бұрын
Hi Sir, I have forwarded your advice to our tech support department, maybe we will host the training soon. Thank you very much.
@dsconnctАй бұрын
Awesome. Exciting times ahead! Looking forward to the training!
@LUXPOWERTEKАй бұрын
@@dsconnct We made the training for Eco Beast yesterday, please check this link to see the recording, thanks. kzfaq.info/get/bejne/aKeAi5aGr9nOloU.html
@dsconnctАй бұрын
@@LUXPOWERTEKThanks so much for the heads up! Appreciate it!
@LUXPOWERTEKАй бұрын
@@dsconnct It's our pleasure, If there are any topics you would like to include in the training, please let us know.
@wisdompasipamire32202 ай бұрын
Please can you help with an installers account
@LUXPOWERTEKАй бұрын
Hi Sir, Please contact your distributor to creat the installer account for you. Thank you
@volodymyrs80052 ай бұрын
But why at 5:00 your inverter detect accum as 50 Ah, if it is 100 Ah ?
@LUXPOWERTEK2 ай бұрын
Hi Sir, could you please share us with your inverter SN, we need to confirm your setting first. Thank you.
@volodymyrs80052 ай бұрын
@@LUXPOWERTEK , I'm about your inverter on video, at time 5:00 ))
@eliseembenga2 ай бұрын
This inventer has the control such as Overload, short circuit and deep discharge protection?
@LUXPOWERTEK2 ай бұрын
Hi Sir, Certainly, our inverters come packed with these features. We welcome you to contact us about the new upgraded version to help you cut down on your electricity costs.
@B3anZa2 ай бұрын
Is this available for south africa
@reversemyopia2 ай бұрын
Please Bring charge last feature to the SNA 5k
@bibab1002 ай бұрын
How do you create a end user account?
@LUXPOWERTEK2 ай бұрын
Hi Sir, you can review this video for creating end user account, thanks. kzfaq.info/get/bejne/kNaYo5ykxpjQgZs.html
@bibab1002 ай бұрын
Hallo How do you create an assistant account or an account for the owner to view?
@dsconnct2 ай бұрын
What happens if the load is greater than the maximum output of the inverter? Let's say I turn on my heater which is 6.4kw. Will the inverter shutdown to protect itself, or will it shift to supply from the grid?
@LUXPOWERTEK2 ай бұрын
Hi Sir, Our inverters can withstand loads up to 1.1 times the rated power connected to our EPS ports, so a 6.4kW heater can be brought up if you choose to use our 6K inverter
@dsconnct2 ай бұрын
@@LUXPOWERTEK Thanks for the prompt response! I've already ordered the 5K inverter, though. Can you advise on how to go about it? Thank you!
@LUXPOWERTEK2 ай бұрын
@@dsconnct You are welcome, if you use our 5K inverter, we will suggest you to connect the heater to the grid side, not to our EPS port.
@MyWinston692 ай бұрын
Hi my solar is not saving me on electric bill..can you help me to diagnose why
@LUXPOWERTEK2 ай бұрын
Hi Sir, could you please share me with your SN? We need to check your system working status first.
@faridvania39372 ай бұрын
My guy did not read the manual and I now need to get the app up and running. How do I do that?
@LUXPOWERTEK2 ай бұрын
Sorry Sir, we cannot understand your question well, could you please share us your SN and tell us the status of your inverter now?