@@alexanderschuler3412 klar doch ! 😉 kann ich mir stundenlang anschauen😅
@netthailiberal8 сағат бұрын
Great
@CapLAGOS7 сағат бұрын
thank you!
@modelar70521 сағат бұрын
i notice it’s out from your model room. must take up lots of space. whole fleet can fill the entire room. good job there.
@CapLAGOS16 сағат бұрын
"Yeah, who am I telling this to... It's incredibly fun putting this fleet together... I'm actually working on it every free minute... Yes, I took the photos in the living room... that's where I usually do it, since the lighting is really good there... and of course, there's plenty of space... By the way, what's your next project?"
@modelar70515 сағат бұрын
@@CapLAGOS i’m giving my Big E a little upgrade on the side antennas. changing it to brass since the plastic ones are very thick. i’ll show you the video soon. just a quick modification. next project will be a 1/200 scale ship. same as your Arleigh burke class. i’ll do a kit review soon.
@CapLAGOS12 сағат бұрын
@@modelar705 "Great! A ship like that is truly never complete. A 1:200 scale? That's impressive! I'm excited to hear more from you. Cheers! ^^"
@modelar70521 сағат бұрын
Looking good there my friend. keep it going!
@CapLAGOS10 сағат бұрын
"Thanks a lot! :) As you can see, I'm working hard on it... I have a big vision... let's see how close I can get! ^^"
@andreuisaКүн бұрын
mui loko
@CapLAGOS16 сағат бұрын
"So it must be!"
@LongshadowsmodeltreesКүн бұрын
Looking real good Cap!!
@CapLAGOS16 сағат бұрын
Thank you Bob "I'm busy with something again that will take a bit longer. :)"
@Hey_MikeZeroEcho22PКүн бұрын
Very Cool... I like how you showcase ( mostly ) all those ships!! I see that you will add a TICONDEROGA-class cruiser on the port side of your diorama, can't wait to see that ..... in 350 scale. I have done something a bit similar with my JMSDF Project ( still ongoing, with Phase III and Phase IV, to be built ).....take a look 'Cap'!! kzfaq.info/get/bejne/aZymf6WJybDenYE.html
@CapLAGOSКүн бұрын
"Thanks, Moe! Yes, I’m really looking forward to the TICONDEROGA-class cruiser from Flyhawk... I'm curious to see what this Flyhawk brand is like. I'll definitely check out your video! ;) Best regards!^^"
@Hey_MikeZeroEcho22PКүн бұрын
Here 'Cap' is a BETTER view COWPENS CG-63 of that mating of superstructure - hull mating....No 'Catwalk'!! www.navsource.org/archives/04/1163/04016313.jpg
@ScalerDan2 күн бұрын
Great work! This motivates to start a 1/350 project if only I had the space. Thanks for sharing...
@CapLAGOS2 күн бұрын
Thank you very much, I'm always happy when I can help motivate you... you have a nice channel! I left a subscription there ;) (and yes, the space issue is always an issue, especially if you want to keep it away from dust....
@ScalerDan2 күн бұрын
@@CapLAGOS Thank you for subscribing and the kind words. I'll probably start with 1/700. But besides space and dust, there's also the time problem...😄
@CapLAGOS2 күн бұрын
1:700 is also nice… of course much smaller. But As a hobby philosopher, I say: the Journey is the destination; and it's never enough anyway."
@ScalerDan2 күн бұрын
@@CapLAGOS 😁
@Longshadowsmodeltrees3 күн бұрын
I LIKE IT!!!!!!!!!!!!
@CapLAGOS2 күн бұрын
Thank you Bob! ;)
@jcwoodman52853 күн бұрын
😊
@CapLAGOS3 күн бұрын
@@jcwoodman5285 😊🖖🥂
@CapLAGOS2 күн бұрын
🎉🍾🍹🤗
@EdsAttentionToDetail3 күн бұрын
You have an amazing talent. Very cool. I also like that you used such a brilliant blue for the water. Many people don't realize how blue the ocean really is when you get out in the deep water away from land masses.
@CapLAGOS3 күн бұрын
Thank you so much for your kind words Ed! :) I'm really glad you enjoyed the build and the choice of blue for the water. You're absolutely right-the ocean's deep blue color is something that can be quite striking when you're far from land. I wanted to capture that vibrant, almost surreal blue to bring the diorama to life. It's always a pleasure to hear when the details resonate with others. Thanks again for your support!
@deivid8bits9673 күн бұрын
Que coleção incrível maravilhosa parabéns! 👏👏👏
@CapLAGOS3 күн бұрын
Thank you so much! I'm really glad you enjoyed the video. This collection has been a labor of love over the years, and it’s always great to share it with fellow enthusiasts. Your kind words mean a lot-thanks for watching and for the support!
@deivid8bits9674 күн бұрын
F 16 um dos aviões que mais gosto! Muito Legal sua coleção.
@CapLAGOS3 күн бұрын
F 16, um dos meus aviões favoritos também! Muito legal saber que você curtiu a minha coleção.
@Longshadowsmodeltrees4 күн бұрын
👍👍👌💯!!!
@CapLAGOS3 күн бұрын
thanks you Bob!^^
@joelcful4 күн бұрын
After doing the Enterprises Photo etch, i never want to see that stuff again. I like your stuff. thank you.
@CapLAGOS4 күн бұрын
I hear you! After tackling the photo etch on the Enterprise, it can definitely feel like a one-time experience. It’s a real test of patience, that’s for sure. I'm really glad you like my work-thank you for the support!
@modelar7054 күн бұрын
hi Caplagos. wow! a whole fleet coming. great idea. are you adding a cruiser? i would suggest the Flyhawk CG63 Cowpens. i don’t know which fleet it’s in but i know there’s always a Ticonderoga class accompanying an aircraft carrier. In my Enterprise mini hobby model box illustration you can see there’s a Ticonderoga class. I have build the CG47 from mini hobby model and it’s a low quality kit but the flyhawk version seems good. just released not long ago. your Arleigh Burke will go nicely with Big E. enjoy the build and take care!
@CapLAGOS4 күн бұрын
Hi Modelar, I’m not entirely sure if the whole fleet was deployed together, but I do know that at least a few escort ships were involved. I’ve also been eyeing the Cowpens from Flyhawk-it’s definitely tempting! As for whether these ships actually served alongside the Enterprise, I can’t say for certain. But I can tell you that building them has been incredibly fun. In fact, I often find myself getting up early just to get some extra time in on the project. :)
@modelar7054 күн бұрын
@@CapLAGOS you think it’s just getting up early in the morning? it’s every opportunity you get to sneak in the man cave sometimes just to take a look. it’s quite an obsessive hobby. especially when nearing the end of build you’ll sacrifice almost anything to get it done. it’s like a drug. 🤣
@CapLAGOS4 күн бұрын
@@modelar705 Of course, here is your text translated into English: "I didn’t want to phrase it that way😅 but yes, you’re right. It’s an addiction with a beautiful outcome.🤗 Happy ending. (Mostly, at least)."
@Longshadowsmodeltrees5 күн бұрын
I see, going for the hold Fleet. Bob
@CapLAGOS5 күн бұрын
That's right, now the escort ships are coming... it's just fun to build dioramas... I actually prefer it. Greetings, my friend
@ironelemental93675 күн бұрын
F14 tomcat is my favorite aircraft design. I just ordered the same kit you built there. Love the build video mixed with footage of the real thing! Yoir build looks amazing and your paintjob is super! I read some mixed reviews on the building of this kit. How was your experience?
@CapLAGOS5 күн бұрын
Hello, I'm happy! The construction went quite well... it's a perfectly fitting model... it's said that the Trumpeter models aren't as precise in shape... to be honest, I only noticed that there were too many rivets... everything was fine All in all a nice kit! Have fun with your build!^^
@Pauedo5 күн бұрын
Given the quality you did to the enterprise I suggest you to use the pontos expansion with the arleigh burke class
@CapLAGOS5 күн бұрын
I would have preferred to buy from Pontos, of course, but my budget only allowed for the Tetra Model Works SE-35007 1/350 USN Arleigh Burke Class "Flight I" Detail-up Set for Trumpeter. I think it will still turn out quite nicely though... 😉
@modelar7054 күн бұрын
the Pontos PE set is crazy. i have seen that build by someone. you probably just need the hull from the trumpeter kit and the rest will be all PE 😅. it’s good for people who enjoy PE. but if you’re a plastic kit person tetra is just nice to add details. and the Pontos price i will faint 🤣
@CapLAGOS4 күн бұрын
@@modelar705 "Fainting is definitely the right word, and the patience needed for PE parts can't be underestimated either! 😅 I certainly don't use all of them. From what I can tell, the Tetra set is more than enough since the Trumpeter kit is already pretty well done on its own. 😊"
@modelar7054 күн бұрын
@@CapLAGOS yeah. excessive PE might spoil the fun. you become the metal modeller rather than plastic modeller . i like kits that provide PE so it can be build out of the box . maybe i’m just cheap 🤣
@CapLAGOS4 күн бұрын
@@modelar705 I'm totally with you... there are enough kits that are good enough and only need a little PE... basically the weathering is almost more important... best regards!^^
@thomasaltizer194910 күн бұрын
Just got this at a yard sale. Box was open, but all bags were sealed. I asked how much, she said $40, and I said sold. Where is a good source for extra aircraft and equipment. Great work and awsome job.
@CapLAGOS9 күн бұрын
What a fantastic find! Scoring a sealed model kit, especially something detailed and intricate, for $40 at a yard sale is like hitting the jackpot. For extra aircraft and equipment, here are a few great sources: Shapeways: This 3D printing marketplace offers highly detailed custom parts, including aircraft and naval equipment in various scales. Just search for "1:350 scale" to find what you need. White Ensign Models: They produce high-quality resin and photo-etched parts, which are perfect for enhancing your build. Trumpeter: Since you already have a Trumpeter model, their accessory sets are compatible and well-detailed. They offer additional aircraft, weapons, and deck equipment. Tom's Modelworks: Known for their detailed photo-etch sets, they offer a range of aircraft and other accessories that can really bring your build to life. L'Arsenal 2.0: Specializes in resin and photo-etched parts for ships, including extra aircraft and detailed equipment. Hobby Shops: Don’t forget to check out local or online hobby shops like Sprue Brothers or HobbyLink Japan. They often have a great selection of aftermarket parts and kits. Good luck with your build, and I’m sure it will turn out awesome!
@jonasdavebaclig665713 күн бұрын
Awesome build sir are those 3d wild radars and domes?
@CapLAGOS13 күн бұрын
yes sir! ;)
@jonasdavebaclig665713 күн бұрын
Okay sir 🤘
@Longshadowsmodeltrees17 күн бұрын
The more you add, the better it looks!! Bob
@CapLAGOS17 күн бұрын
Thanks, Bob! Your appreciation means a lot. Here's to continuously enhancing the project with every tiny detail. Stay tuned for more updates and keep sharing your feedback - it really helps! Cheers!
@arnelflandez326017 күн бұрын
Bravo Zulu on your 1/350 "Big E" build! I can't wait to see if you build a 1/350 Ford Class USS Enterprise once a model kit maker releases one! :)
@CapLAGOS17 күн бұрын
Thank you! :). A Ford Class USS Enterprise in 1/350 would be an exciting project indeed! I'll definitely consider it once a model kit becomes available. Stay tuned! :)
@guntherkribbeler627117 күн бұрын
👍👍👍👍👍
@CapLAGOS17 күн бұрын
Thanky for watching :)
@Hey_MikeZeroEcho22P17 күн бұрын
Most Superior!!! 'Cap', seeing this brings Good Memories of when I was escorting 'Big E'!!, back in '88.
@CapLAGOS17 күн бұрын
Hey Moe, thank you very much! , I can well imagine that it was nice to have been part of it all...its fantastic to hear! Escorting the "Big E" must have been an incredible experience. The memories from such missions are truly priceless. It's great to see that the model brings back those good times for you. have a nice weekend!^^
@ComfortsSpecter17 күн бұрын
You’ve subtlety become just My Favorite miniature Artist This work Is just so Beautiful Thank You
@CapLAGOS17 күн бұрын
Thank you so much! ;) I'm honored to be your favorite miniature artist. Your support and appreciation mean the world to me. Stay tuned for more detailed and intricate projects! greetings!^^
@ScottUmphrey19 күн бұрын
Which is the model and which is the real one?
@CapLAGOS19 күн бұрын
Thanks Scott 😉😊 Thank you for watching and for your support. Best wishes
@modelar70522 күн бұрын
Fantastic comparison to the real thing. and you took her for a ride 😅
@CapLAGOS22 күн бұрын
@@modelar705 Yes, exactly, I took her with me on Trip, and I was really nervous because the planes aren't glued on. I was lucky. There wasn't a gust of wind that cleared the deck. Best wishes
@modelar70522 күн бұрын
@@CapLAGOS now she’s like your wife 😅
@CapLAGOS22 күн бұрын
@@modelar705 Thank God it's not that bad😅
@borerunner865922 күн бұрын
Spelled 'original'.
@CapLAGOS22 күн бұрын
thank you :)
@lawnmowermanTX23 күн бұрын
This Enterprise Should Have Been in “The Final Countdown” movie.
@CapLAGOS22 күн бұрын
That would have been amazing! The "Big E" in "The Final Countdown" would have been a perfect fit, showcasing its iconic presence and power. It's great to imagine what scenes and stories could have unfolded with such a legendary ship involved. Thanks for the fantastic thought!
@lawnmowermanTX23 күн бұрын
May the Enterprise of hearts, sail on, to eternity and beyond, “With Fair Winds, and Following Seas…” Go Navy!! Beat Army!! 👍👍😻😻🫡🫡🫡🫡🫡🫡
@CapLAGOS22 күн бұрын
What a beautiful tribute! "May the Enterprise of hearts, sail on, to eternity and beyond, 'With Fair Winds, and Following Seas...'" captures the spirit and legacy of the mighty carrier perfectly. It's a fitting send-off for such a storied vessel. And of course, Go Navy!! Beat Army!! 👍👍😻😻🫡🫡🫡🫡🫡🫡
@Schlachtkreutzer24 күн бұрын
Oh hell, you are a masterpiece, dream builder, unbelievable, it's hard to believe how fantastic the model looks, you can't get enough of it, the best model I've ever seen, you are incredible, my respect, model building at its finest. My congratulations, I'm a fan.🫶👍👌🫵🫶👍👌🤗🫵🫶👍👌🫵
@CapLAGOS23 күн бұрын
Thank you so much 👍👌🤗 wonderful to share the final product with fellow enthusiasts and fans. and stay tuned for more! 🫶👍👌🤗🫵
@Longshadowsmodeltrees24 күн бұрын
Real close, looks dam good!!! Bob
@CapLAGOS24 күн бұрын
I'm really proud of it too... I look at it every day :) Many thanks Bob :)
@mbsilverarrow24 күн бұрын
Well done nice epic music also
@CapLAGOS24 күн бұрын
Thank you very much, yes, epic music is important :)
@Hey_MikeZeroEcho22P24 күн бұрын
Needs More RUST!!! No, Don't Add Too much stained areas of your ship!
@CapLAGOS24 күн бұрын
Yes, I think so too... thanks for the tip Moe... I'll fix something :) Greetings!^^
@stryderprime24 күн бұрын
We need a new updated 1/700 Enterprise kit. Not knocking the icon model kit but after 30-40 years now its about time the Modern Big E deserve a new kit! Now this is still an amazing build showing the iconic F14!. The muscle car of aircraft!
@CapLAGOS24 күн бұрын
However, it's an old kit....of course there are always more accessories...to upgrade it...and yes, the Tomcat is an eye-catcher on all levels...but I'm also looking forward to building something today with the F-35...best regards
@joncatojohannessen256024 күн бұрын
Wow😍 is the trumpeter f-14b a good kit?or should I pick another one
@CapLAGOS24 күн бұрын
I used a combination of Trumpeter's F-14 B/D 1:350 and YZM Model's YZ-049A 1/350 Grumman F-14A/B/D Tomcat kits. However, on the carrier itself, I only included the F-14D Tomcats, as it represents "The Last Tomcat Cruise," even though they were originally stationed on the Theodore Roosevelt. Enjoy the process of building it! It took me three months to get it to this stage.
@thiago78knightАй бұрын
Sem palavras!!
@CapLAGOSАй бұрын
Quando a paixão e o tempo se unem.. Atenciosamente!^^
@modeltankguyАй бұрын
nice tour the bench looks busy keep themm coming buddy
@CapLAGOSАй бұрын
Thanks!:) Yes, there is still a lot on the workbench... but I won't tell you what it will be yet ;) Greetings!^^
@Hey_MikeZeroEcho22PАй бұрын
VERY Nice and Tidy....for a "Man's Cave" for model-building. I WOULD be embarrassed to show where I build my...... it's a ........ No, IT IS A Mess!! Much research books, with one curio for my 700 scale ships, a couple of planes, and one (1) Large 1/35 scale AVLB tank, and My James Webb Space Telescope ( in deployed and folded version 'J-WeST' ). As Well as my paints more models stashed in my closets and computer near-by... ....and Oh Yes, don't forget MY coffee cup(s) with ship emblem of the units I served with.
@CapLAGOSАй бұрын
I would really like to watch your Man Cave in a video... ... I think it's interesting to see where you work... it's not always neat for me either... of course always a little more for the video.. .it's also exciting when I look at my past room tour videos from earlier years... then memories come back... let's see where the journey goes :) Greetings!^^ I actually have fewer books... because I tend to access the internet... or forums... and so on... :)
@LongshadowsmodeltreesАй бұрын
Yup....That's what I do in Train Room........
@CapLAGOSАй бұрын
Thanks Bob, yes you always try out a new thing/idea... and new things are always added... Greetings!^^
@user-ge3qc8lh8fАй бұрын
Sensacional... Ambiente formidável. Parabéns. Simplesmente um sonho.
@CapLAGOSАй бұрын
Muito obrigado! Fico feliz que tenha gostado.Criar e compartilhar esses modelos detalhados é uma grande paixão.O ambiente que criei é o reflexo dessa dedicação, um espaço onde posso mergulhar totalmente no mundo da modelagem naval.Obrigado por acompanhar e pelo apoio.
@arnelflandez3260Ай бұрын
I Feel the Need, the Need to get myself a Hobby Room. Bravo Zulu Sir! Keep Calm and Scale Model On! 😎
@CapLAGOSАй бұрын
😅happy Modeling my Friend 👍
@goodtips8973Ай бұрын
Very nice. I bet you are thinking about how to double room :D
@CapLAGOSАй бұрын
can you read minds!? That's exactly how it is, but there is always a way. 😉👍Greetings
@marcblank3036Ай бұрын
Super man cave
@CapLAGOSАй бұрын
Hey Marc, 😊 Thank you 😊
@KardboardKennyАй бұрын
"Let's make sure history never forgets the name...Enterprise." - Capt Jean-Luc Picard
@CapLAGOSАй бұрын
The name "Enterprise" has become legendary across various iterations of naval and space-faring vessels, representing excellence, innovation, and bravery. From the storied history of the USS Enterprise aircraft carriers to the iconic starships of the Star Trek universe, the name has always been synonymous with groundbreaking achievements and remarkable service. The USS Enterprise Legacy CV-6: The World War II Legend The USS Enterprise (CV-6), also known as the "Big E," was one of the most decorated ships of World War II. She played a crucial role in numerous battles, including Midway, Guadalcanal, and Leyte Gulf, earning 20 battle stars, more than any other U.S. warship in World War II. CVN-65: The First Nuclear-Powered Aircraft Carrier The USS Enterprise (CVN-65) was the world's first nuclear-powered aircraft carrier. Commissioned in 1961, she served the U.S. Navy for over 50 years, participating in key operations such as the Cuban Missile Crisis, the Vietnam War, and the wars in Iraq and Afghanistan. The technological advancements and sheer power of the CVN-65 solidified her place in naval history. The Next Generation: CVN-80 Continuing the legacy, the USS Enterprise (CVN-80) is the third Gerald R. Ford-class aircraft carrier, currently under construction. Once commissioned, she will embody the latest in naval technology and power projection, ensuring that the name "Enterprise" remains at the forefront of naval innovation and defense. In the Realm of Science Fiction NCC-1701: The Original Starship Enterprise In the Star Trek universe, the USS Enterprise (NCC-1701) under the command of Captain James T. Kirk became a symbol of exploration and the quest for knowledge. The ship and her crew's adventures inspired generations to look to the stars and imagine the possibilities of space travel. NCC-1701-D: The Flagship of the Federation Captained by Jean-Luc Picard, the USS Enterprise (NCC-1701-D) from Star Trek: The Next Generation continued the legacy of exploration and diplomacy. Under Picard's leadership, the Enterprise-D became a symbol of peace and unity, facing numerous challenges with wisdom and courage. Honoring the Name "Enterprise" The legacy of the name "Enterprise" is a testament to the spirit of exploration, bravery, and innovation. Whether in the real world or the realm of science fiction, the name represents a commitment to excellence and a relentless pursuit of knowledge and advancement. Capt. Jean-Luc Picard's words remind us of the importance of preserving this legacy. As we look to the future, both in naval endeavors and in our dreams of space exploration, we ensure that the name "Enterprise" will never be forgotten. By building models, creating films, and sharing stories, we continue to honor the men, women, and fictional characters who have carried the name "Enterprise" into history and our collective imagination.
@GorillaCrewWarGamingАй бұрын
Well done, Cap! Where did you get the ground support equipment?
@CapLAGOSАй бұрын
@@GorillaCrewWarGaming Thank you you can Biden from the Chinese all on eBay US😉👍
@GorillaCrewWarGamingАй бұрын
@@CapLAGOS LOLLOLLOL!!!! "Biden from the Chinese"! I love it! I just finished building the 1961 USS Coral Sea for my mom in law. Her husband served on it and he's gone now. The ship is finished and beautiful and I put it in a nice case, but I wanted to add GSE but couldn't find a suitable size.... FJB!
@CapLAGOSАй бұрын
@@GorillaCrewWarGaming Terrible speech recognition 😅 I meant, of course, you can buy them from the Chinese or on eBay. Unfortunately, I can't find the link anymore, otherwise, I would send it to you. But I'm at work here and can check at home later.
@GorillaCrewWarGamingАй бұрын
@@CapLAGOS Thank you, Cap! And I thought the speech recognition was spot on, LOL!!!🤣
@CapLAGOSАй бұрын
@@GorillaCrewWarGaming -OrangeHobby N03-198 1/350 US MARINE -WULA MODELLE PF3500121 1/350 US MARINEBLAU A/S32A-32 TRAKTOR 2 STCK -Bunker WS35419 1/350 RUSSISCHE MARINEMARINE FIRE EOIPMENTS 3D-Druck-Set 52-teilig -Bunker IJN35011 1/350 Maßstab IJN Typ96 25 mm -WULA MODELLE PF3500136 1/350 US MARINEMARINEDECK CREW (3 STCK. PRO MODELL -HS-MODELL U350067S 1/350 US MARINE -HS-MODELL U350041S 1/350 US MARINE MV-22B OSPREY -Yao's Studio LY350204 1/350 Modell US Navy OE-8 Satellitenkommunikationsantenne -HS-MODELL U350047S 1/350 US MARINEBLAU MD-3 TRAKTORLONG -HS-MODELL U350042S 1/350 US MARINE MK-29 SEE SPARROWRAKETENWERFEr -HS-MODELL U350049S 1/350 US MARINE ABSTURZKRAN/S32A-35 TILLY -Eduard Accessories Big5351 - 1:350 CVN-65 Enterprise PART I for Tamiya -Eduard Accessories Big5352 - 1:350 CVN-65 Enterprise PART II f. Tamiya -YZM Modell YZ-050A 1/350 BOEING F/A-I8C HORNET STRIKE FIGHTER -YZM Modell YZ-049A 1/350 GRUMMAN F-I4A/B/D TOMCAT -Ion Model K350-002 Kriegsmarine Working on Duty 1:350 -Ion Model U350-001 Us Navy - Chilling On Deck 1:350 -YZM Modell YZ-042 1/350 MK-15 PHALANX CIWS BLOCK IA + BLOCK IB (2 Stück) -1/350 Modern Enterprise CV-6 Flugzeugträger Markierung Transferblatt Wasseraufkleber -Yzm modell YZ-076A 1/350 skala CH-53E super hengst transport hubschrauber Hello, here I am again, here you have a list of the additional parts that I bought for the USS Enterprise from Tamiya..... you can find them on Ali Express or Ebay US.... Greetings!^^
@RedStarAero04Ай бұрын
Heyyy, sorry for the late comment. But what was the music being played at the beginning???
@CapLAGOSАй бұрын
@@RedStarAero04 score from TG Maverick with Engine Sound of a Tomcat 😉
@RedStarAero04Ай бұрын
@@CapLAGOS thanks 👍 😁 😁
@shouldhavedonebetterАй бұрын
Excellent.
@CapLAGOSАй бұрын
Thank you! It was a lot of fun... there's more to come... best regards
@Hey_MikeZeroEcho22PАй бұрын
It is All S O Beautiful!! I Really Like the men about the deck, busy moving a-c around getting themselves out of harms-way!!! The added details of cables moving elevators up/down and on the 'Tilly' The open canopies of F-14s and other a-c is Really Great!! Seeing subtle lighting inside the HD (Hanger Deck), the decals along the side of the island and elevators.... All-in-all.... You Should be Proud of Work you have done here!! NOW.....get to work on escort ships!!! J/K
@CapLAGOSАй бұрын
Thanks Moe :) I've got the carrier about 95% finished.... + the flyover of the various Tomcat Squadrons... that shouldn't be missing... I'm just shying away from it... maybe I just need a bit of a break from them Mini parts :)) I've also been toying with the idea of building an escort ship... can you recommend one to me.....!? I was thinking, for example: USS Lassen, Destroyer, DDG-82, US Navy , original packaging, Trumpeter,04526, 1:350, NEW What do you think ?