Awesome. Thanks man. I was worried I broke it after just a couple weeks owning it and would have to send away for lengthy expehsive repairs. This is much better. 😀 Question: is the back legs a different looking axis hinge that i shoild probably order now in case i break one? Thanks again.
@ConversasAleatoriasPelaEuropa2 күн бұрын
Thanks for the great video! Very helpful! 👍🏼👍🏼👍🏼👍🏼
@ShermanPics8 күн бұрын
This is a video I’ve been looking for thank you. I just got my DJI mini 4 Pro. I ran into the wall. I just disabled the obstacle guard😩 Thank you.
@sciencebygabrawy5 күн бұрын
Something I do way too much lol. Glad it helped!
@ShermanPics3 күн бұрын
@@sciencebygabrawy I followed your easy and simple instructions to replace the arm shaft axis hinge. I’m 🆙 and running now. Thanks for your advice and guidance 🙏🏾✊🏾🙏🏾
@ItzJasonJustin8 күн бұрын
I messed up bad…. I damaged the screw in the arm and it’s the one I need to take out to put the shaft on… the screw is damaged and won’t come out so I’m unsure of what to do now…😢
@sciencebygabrawy5 күн бұрын
I’m sure you’ve seen those KZfaq videos where they put rubber band between head of the screw the screwdriver to help get some traction. Another idea, and this may be way too aggressive, but there’s always the option of using a screw extractor. You know the screw that you drill into the screw, where the threads spin in the opposite direction. Sorry man! Let me know how it goes!
@ItzJasonJustin3 күн бұрын
@@sciencebygabrawyyes I have tried the rubber band and that didn’t work and well the part where you screw a hole in the screw doesn’t work for some reason I’m not sure why I used a corded drill and it’s powerful so I’m not sure😢
@kevinharris51018 күн бұрын
This young lady should run for Gov. in Cali!!!!
@Alhusam8 күн бұрын
Hello everyone, the transmission cable of my Mini 4 Pro was severed in a crash that also broke the arm shaft axis hinge. What is the best solution to resolve this issue, and can my drone still operate without repairing it? Thanks.
@AMGA45S2B9 күн бұрын
Broke mine ! 😢 thx so much 😊
@SmileSpills10 күн бұрын
hello. my dji min i 4 pro got crashed and drone is not connecting to the remote. can u please help me with this?? what maybe the issue?
@a.hakimi10 күн бұрын
Hello I tried to disassemble the propeller but it wore out and now when I turn it with the screwdriver it spins in a vacuum How can I do it, can you help me?
@henriquedesouzamartins180713 күн бұрын
Is it possible to do the same on Mini 3? I tried to take off it, but didn't succeeded...
@sciencebygabrawy13 күн бұрын
It’s done the same way. Normally the mirror bell should be very snug in place by cogs that fit tightly with the shaft. If you are having trouble getting it off, I wonder if that’s even the problem?!?
@Alhusam16 күн бұрын
What a professional and fast job! Unfortunately, my new Mini 4 Pro broke its front right wing in exactly the same way. Sadly, one of the cables attached to the propeller was also cut. My question is: where can I get the original replacement part for that triangle? Thanks, everyone.
@sciencebygabrawy15 күн бұрын
Oh man! Sorry about That! Well in the DJI app, I believe you can purchase anything. apps.apple.com/app/id899147555 But I just use Amazon to be honest. Everything’s there and available. Good luck!
@Alhusam15 күн бұрын
Actually, I have already got that. Your video was very helpful and informative regarding that issue. Thanks.
@user-nh5xt4mw4w16 күн бұрын
Just flew into some power lines and did exactly this. Identical broken axis hinge. Did the epoxy method work instead of full replacement of the axis hinge? Will try that temporarily while i wait for the replacement part.
@sciencebygabrawy15 күн бұрын
So I did end up using epoxy on the broken triangle piece, but I never used it because I just ended up installing a new one. So I never really got to test the one that I epoxied together.
@ItzJasonJustin13 күн бұрын
SAMMEEE THE WIND AND LOW BATTERY MADE ME HIT THOSE DANG LINES
@user-nh5xt4mw4w13 күн бұрын
@@sciencebygabrawy I just went ahead and tried the epoxy method. The super glue stuck the plastic back together and I have placed the axis hinge back into the arm in its original position. Have flown the drone once without issue however I believe if I pull that arm in the wrong direction when folding it out then it will likely break the axis far more easily again. In summary the epoxy method works but I dont trust it long term so I have ordered a replacement piece anyway in case.
@TheGrueSlayer16 күн бұрын
Thanks for the Video.
@matttelese497318 күн бұрын
How come you didn't show how you took the fuel pump out of the tank
@sciencebygabrawy17 күн бұрын
I needed two hands. Just pull up and maybe spin a little. It’s a bit annoying as it’ll bump against the tank and catch on the side but just maneuver it a bit and it comes right out.
@LuigiGuevara19 күн бұрын
thanks mate, now I know what do I have to do
@sciencebygabrawy17 күн бұрын
Glad I could help!
@josephalbano519221 күн бұрын
This was just what I was looking for and it give me exactly what I needed to successfully replace my broken arm shaft on my DJI Mini 4 Pro! Very inexpensive and fast solution.
@sciencebygabrawy19 күн бұрын
Awesome! Glad it worked out perfectly!
@chizama411023 күн бұрын
What would you recommend of one of the screws is stripped
@sciencebygabrawy22 күн бұрын
Well, if it were my drone I’d epoxy the head of my screwdriver to the head of the screw. Then wait 24 hours. Then I would spray a very small amount of WD40 or lithium grease down the threads. Then I’d try backing off the screw. I don’t know if you have a better idea but anyway good luck!
@prmayner27 күн бұрын
You mean 10 minutes per bolt plus 10 to pull pump and 10 to put it back in. I think you left off a number.
@sciencebygabrawy27 күн бұрын
lol 😂😂 I honestly didn’t mean to be misleading. What I meant is learn how in 10 minutes. The vid is 10 minutes.
@prmayner27 күн бұрын
@@sciencebygabrawy gotcha, my bad. I've done it your way and cutting the bed and pulling the tank. pulling the tank is my last resort. retired mechanic.
@fernandez306328 күн бұрын
i changed my prop and a piece of debris was inside the motor, i managed to take it off but after that i got a ESC error and power system hardware error
@sciencebygabrawy26 күн бұрын
Wow! Errors do occur from time to time but not from a simple prop change. I’m certain DJI would help right away trouble shooting.
@drew599228 күн бұрын
Nice! And he manhandled the bed!
@sciencebygabrawy28 күн бұрын
Lol
@NovaEastCoastАй бұрын
Perfect video thanks. Now to get the chain saw out and pay that tree back jk. 😗
@sciencebygabrawy28 күн бұрын
lol 😂
@NovaEastCoast27 күн бұрын
@@sciencebygabrawy Just did the first test flight! All Good! Thanks again :) The rest of my holiday is now back on track.
@eadjh98Ай бұрын
Thanks for sharing, just broke mine a couple of days ago , any ideas where to purchase a new Axis hinge please? Subbing to your channel 👍
@sciencebygabrawyАй бұрын
Sorry to hear that! Thanks for the sub! Here’s the link for what I picked up from Amazon. a.co/d/9bDIcsz
@BioLogy-nl9uqАй бұрын
Wow ❤
@lincolnikedaАй бұрын
Muito obrigado!! Eu quebrei esta peça do meu mini3.
@sciencebygabrawyАй бұрын
De nada my friend!
@NhungNguyen-ej4poАй бұрын
I love it 😊
@sciencebygabrawyАй бұрын
Thank you! Study Well!
@matthewj.9261Ай бұрын
Make sure if it's a half ton that you pull the back bumper off, or it will scratch the s*** out of it on the passenger side then you have a simple $800 touch up repair. I should have paid more attention
@sciencebygabrawyАй бұрын
Oh no! Sorry man! 1/2 Ton trucks pay attention!
@jimsmith2782Ай бұрын
I don't know how you did that because it's impossible to get those screws loose
@sciencebygabrawyАй бұрын
If you’re using the correct size Phillips screwdriver, and the head isn’t stripped, then maybe they just overtightened the screws in which case maybe just drop a drop of lithium grease or WD-40 and see between the threads. That’s just very strange to me but I can’t think of any other reason that the screws won’t come out.
@kurtiscaАй бұрын
AWESOME video, thanks so much for sharing!
@sciencebygabrawyАй бұрын
You bet! Thanks for watching!
@craigjones9367Ай бұрын
Does this come off the same as a mini 3 pro? I’ve damaged the screw shaft trying to remove a rounded screw. I’m hoping I can just replace the motor housing by taking it off like in this video
@sciencebygabrawyАй бұрын
Yes! It comes off the exact same way and the parts are readily available! Good luck!
@claytonhealsАй бұрын
you are doing well, don't be nervous. you're on the good side
@sciencebygabrawyАй бұрын
That’s what’s up!!
@websitesthatneedanemАй бұрын
ON the HUB ONLY !!! ON the HUB!!! ON the HUB!!! ON the HUB!!! ON the HUB!!!
@sciencebygabrawyАй бұрын
Yes. Gotta be careful
@GooseblitzАй бұрын
Great video. Is there a similar way to access on a Suburban?
@sciencebygabrawyАй бұрын
Of it’s not exactly the same, it’s gonna be very similar. Anyone else know?
@beanMosheenАй бұрын
Why the %^%$ is the retaining ring not stainless, and why is it in a sump? Good ol' GM trucks as usual.
@sciencebygabrawyАй бұрын
So so true!
@JumarbalmacedaАй бұрын
Hello, do you know how to count ridges on each
@sciencebygabrawyАй бұрын
Yes, count the black lines just inside of the deltas but your professor might count differently
@Jacek_BАй бұрын
Thanks ❤❤
@sciencebygabrawyАй бұрын
🤙🤙
@mohammadrasoulfard-habibi3066Ай бұрын
Absolute legend
@sciencebygabrawyАй бұрын
🤣🤣
@richiksalona302Ай бұрын
Love from 🇮🇳
@sciencebygabrawyАй бұрын
👍👍
@jordanfolkard40092 ай бұрын
I managed to snap one of the arm screws leaving a piece of the screw stuck what's the best way to remove it
@sciencebygabrawy2 ай бұрын
I’ll tell you but please use ultimate caution and precision. Use the smallest finest punch and punch a dent in the center. Drill with the absolute skinniest drill bit you can find down as far as the screw goes. Drop a drop off lithium grease to loosen. Put the punch back in and gently wiggle it out. Good luck.
@BravestDawg1012 ай бұрын
Holy hell you have steady hands, trying to get those screws in without a magnetic tip was a nightmare for me. At one point a screw fell down the little hole where the wires come out, spent a good 10 minutes shaking the thing to get it out lol. Regardless, thank you very much for the video, I was really worried when it first broke, but less than $15 for a repair and we're back to flyin!
@sciencebygabrawy2 ай бұрын
Yep! A bit stressful when you’ve just spent a good amount of money only to break soon after! It’s great knowing there’s plenty of replacement parts out there. Thank you and happy flying!
@SanatSawant102 ай бұрын
Hey while changing my propellers my screw broke and is now stuck. What do I do?
@Dieguitobeat2 ай бұрын
pudiste solucionarlo, que paso?
@sciencebygabrawy2 ай бұрын
I’ll tell you but please use ultimate caution and precision. Use the smallest finest punch and punch a dent in the center. Drill with the absolute skinniest drill bit you can find down as far as the screw goes. Drop a drop off lithium grease to loosen. Put the punch back in and gently wiggle it out. Good luck.
@champikadp2 ай бұрын
Thank you so much just got it fixed thanks to your video.
@sciencebygabrawy2 ай бұрын
You bet bud! Happy flying!
@bluegelatinstudio2 ай бұрын
4:28 What is that tool you’re using to get the ring loose?
@sciencebygabrawy2 ай бұрын
I think I was using a pneumatic air hammer. This way I could use just one hand. It hammers very fast.
@rachelgoodkind65452 ай бұрын
Thank you for sharing. As a longtime vegan, I agree wth your information. I am so very grateful I stopped eating cadavers, dairy, eggs, fishes, etcetera. They make our pH acidic, are difficult to try to digest, steal our energy, make us smell, and kill innocent lives. If we cannot kill the animal with our bare hands, we should not consume it. Its' too convenient to let some immigrant in a slaughterhouse to kill all day long for our "meals". NOT a happy job.
@sciencebygabrawy2 ай бұрын
So true! Such a good way to think about it! Maybe one day society will be forced into that lifestyle anyway, seeing the way food is becoming ridiculously expensive.
@rachelgoodkind65452 ай бұрын
@@sciencebygabrawy I believe the globalists have planned that for years, so we can then eat bugs and gmo lab foods...yuck..like an evil horror movie, but real
@cameragodvisionary2 ай бұрын
Great instructional video, I just have one question: if the broken arm isn't lighting up and calibrating upon startup (like the other 3 do) does this mean that I also have damage with the wires as well? Or will replacing the shaft acid hinge fix this issue? My arm is hanging out more than the damaged one in the video.
@sciencebygabrawy2 ай бұрын
Thank you sir! So unfortunately, it sounds like you got a wire issue at hand. There’s always a chance that you could repair the cut wire without having to pull apart all the body shell pieces but if you do have to remove more, I would write down the steps you take being your first time so you don’t forget anything! Btw new arms come with new wires and they’re about $100. Good luck!
@DroneFilesYT2 ай бұрын
2:48 “you can’t SCREW UP” lol no pun intended😂😂
@sciencebygabrawy2 ай бұрын
lol
@TFLSTUDIO882 ай бұрын
Thanks for this!!! My refresh packages just ran out and i had already resigned myself to buying a new one. But i think i'll give this a go first! hope it works as smoothly as it looked in this video! Thanks again!!
@sciencebygabrawy2 ай бұрын
It will it’s easy trust me! You’re welcome!
@uneasy_playz2 ай бұрын
Ok my dji mini 4 pro broke down and i am ordering part so i will come back here once i have received the parts and will fit it up in my drone. Then i will give you the second comment. I hope this will work with my drone too. 🥲
@sciencebygabrawy2 ай бұрын
It’s good for pilots to work on their own drones as this gives them a better appreciation for the engineering that goes into it! It’ll work bud!
@darrienpenco91432 ай бұрын
A bird attacked my drone it fell and the motor is not rotating what should I do
@sciencebygabrawy2 ай бұрын
Maybe try to blow compressed air if you think dirt or sand got in the motor. Is there power going to it at all? Do you feel it moving a little or no motion at all?
@digitaldee112 ай бұрын
Thanks ✅keep up good work
@sciencebygabrawy2 ай бұрын
Thank you!
@ryaldeveau62992 ай бұрын
Such a HORRIBLY weak point!
@sciencebygabrawy2 ай бұрын
Yeah lol. Gotta keep your weight down. Maybe flexible joints is a good innovation for the engineers to come up with
@ryaldeveau2072 ай бұрын
@@sciencebygabrawy they could of at minimum used glass fiber reinforced plastic instead of just thin plastic connected to a chunk of metal...
@explorewithvaly2 ай бұрын
Indeed .. I just broke mine
@champikadp2 ай бұрын
It a good design IMHO, I just broke mine and got it replaced thanks to this video pretty easily. If the hinge was stiff arm could of broken (at least with situation I had to face) which would be harder and expensive to repair.