I tested my bank angle sensor and when I tested the red/white wire with the green wire, it read close to the battery voltage. Any chance anyone knows what that means? When I tested the white/black wire with the green wire it read close to the battery voltage as well.
@fordtough838 күн бұрын
i know this an old video but i'll try anyways. if i get 12 v on both the wires on B.A.S. what next
@NewtPK17 күн бұрын
Planning on doing this ride this weekend.
@dtogo428621 күн бұрын
How did you get the lube off the rim?
@SocialVoiceApps27 күн бұрын
190 seems safer for daily riding .. am I wrong ?
@chezrejacobs29 күн бұрын
what if you don't get connection on pin 4 and 18 on the black connector?
@Alexander-mm1ifАй бұрын
I use MOTUL lubricant but it always end up with oil splatters on my clothes and the seat!
@DH-zj9jbАй бұрын
Thanks bro. Helped
@chezrejacobsАй бұрын
my bike still not running after watching all three videos
@laservlxАй бұрын
Its pronounced " Mo Tool" Belray superclean still flings off. Until they banned it in Canada i use belray super clean religiously and i still had to clean my wheels once a week .
@MathewGarayАй бұрын
Lmao “I could literally do this in 5 mins if I wasn’t dicking with the fucking camera” lmao
@cheny6489Ай бұрын
use C3 not C2
@comonerleonАй бұрын
Can you adjust the foldability in it. I don’t want them folding easily
@MotoBikeMikeАй бұрын
Just tighten the screws more and it will become more difficult to fold. Honestly though they don’t fold super easy so they won’t just flip up by accident. Never happened to me. Maybe if they were some Chinese brand or some but these are solid.
@comonerleonАй бұрын
@@MotoBikeMike Mike my man appreciate the reply. Perhaps I read too much into the potential dangers. I just ordered the same ones diff color for my R1M. I ride too aggressively and race too much for it to potential flip up. Do you reckon if I really tighten them up they couldn’t be forced to fold by normal pressure only thru excessive force?
@MotoBikeMikeАй бұрын
@comonerleon I would say yes to if you tighten them enough they would only fold with excessive force. At the very least to the point you would feel comfortable it would definitely not be accidentally flipped up without purposely doing it or sliding. Keep tightening until you feel you like it. I tighten mine enough that it almost didn’t move so I loaned it just a tad. I also took them apart and added blue lock tight on and just make sure it’s all good. I think it’s good practice to double check all. Never know if it was made on a Friday 😂. Like the old saying goes never buy something made on a Friday or a Monday.
@davidsamano63032 ай бұрын
What if I have no volts going to my starter?
@davidsamano63032 ай бұрын
I am not getting power from my solenoid to the starter, would that cause my cluster to not get any power as well?
@jordanhardy35152 ай бұрын
"For safety" yea right, I bought it because it looks bad ass😂
@Just.Mig332 ай бұрын
Car , bike, any vehicle don’t tailgate . At least 6 ft
@renata13-132 ай бұрын
Thanks for sharing…I haven’t started my bike in almost 3 years. I am going to take mine off & clean it out.
@seahawksforever95042 ай бұрын
Great simple video to learn. Thanks.
@BSABD3152 ай бұрын
cant find it on my cbr 125 2008
@johnnychavarria53183 ай бұрын
The two plugs on the clutch switch does it matter which plug goes on each prong
@texasblake1153 ай бұрын
Hell yeah good video
@lukebond4313 ай бұрын
I have a 190 on my cbr but I also have a different tires with different tred on the front I get a wobble feeling at high speed. Could it be down to tires or somthing else?
@MotoBikeMike3 ай бұрын
The front tire probably needs to be rebalanced. Good chance anyway if you’re get a wobble at high speed or wheel bearings
@itsaliviahere82294 ай бұрын
I know this is old but thank you!!! 🙏🙏 so helpful
@MotoBikeMike4 ай бұрын
Glad it could help
@hurricanej12404 ай бұрын
Can I put a 190/55 on a mt07 Yamaha ?
@timstuder45334 ай бұрын
Great video!
@simpless99974 ай бұрын
Hey man I was watching a video sometime ago about chasing a no prime issue on a cbr it was a 3 part series and their was a part you were taking about the fuel pump wires and on my bike the middle wire has continuity with the ground bu also carry’s a 1.8v current through it is that normal ? Any help is much appreciated I been trying to get this bike to run for a while
@-M-power4 ай бұрын
What mode is the best and give more power to bike R or S ?
@MotoBikeMike4 ай бұрын
Each mode has the same power BUT what it does is massively reduce engine braking. Race mode has very minimal engine braking so when you roll of the throttle like a normal motorcycle the engine starts to slow the bike down. In race mode on the Aprilia it does not so you don’t lose power or speed while rolling off the throttle and you would use brakes more like in a race. Track mode has slightly more engine braking and S is street mode it has normal engine braking.
@-M-power4 ай бұрын
@@MotoBikeMike thank you so much for quick response.
@Charlie-gt1ru4 ай бұрын
Thank you man
@drifterxl124 ай бұрын
Awesome thanks
@kadrisadiku28464 ай бұрын
life saver
@danielstorey36964 ай бұрын
I'm having the exact same problem. This stuff is terrible and flings off all into my mudguard and front sprocket area. It also dissolved the pre-existing lube inside the links and made a huge mess of my wheel.
@movingtarget47845 ай бұрын
looks amazing even in daylight!
@TheEminemRecovery5 ай бұрын
How do I put it back on?! the gas tank under the tankfairings won’t fit properly
@carlosliranzo47065 ай бұрын
Awesome video man super straight forward, subscribed
@mr.tarkovish25875 ай бұрын
I see another Merkules fan😏
@Ro20_5 ай бұрын
That looks badass. I bought the green ones for my ninja so i can have them ready for summer
@trsskater6 ай бұрын
You must not have used a textile jacket that has holes in it if you say perf learher flows more air. My Icon Contra 2 jacket is almost like not wearing a jacket because mesh flows just so much air. In Virginia it gets too hot to wear leather in the summer because the sun will fry you even when moving. Its so hot even in mesh with highway riding i will still will be sweaty when I get to my destination. It doesnt have rhe same level of slide protection as leather but from other people who have crashed if don't buy a cheap textile jacket you won't get road rash. The jacket will be done but it does its job. The people with road rash has an urban city level low speed jacket and then went down at at 50mph and wonder why it shreaded. If you are doing higher speeds you need more than 450D fabric for a slide.
@ronenbenaaron26616 ай бұрын
debating between: bridgestone s23, PIRELLI ANGEL GT2 TIRES, PIRELLI DIABLO ROSSO IV TIRES which you from you think is best ? or better to be with bridgestone s21 (Aprilia rsv4 rf currently have Q4 was using it only for the track, now on the street)
@chapmanwendy2196 ай бұрын
glad your ok. at 55 i just got back into riding with that same bike except its 2012. clear reminder for me about gravel. I personally would ride at those speeds though
@arjunsrao6 ай бұрын
Been 6 years for this video.. still kicking.. thanks man.. ! I got my M1 yesterday ..
@MotoBikeMike6 ай бұрын
Congrats on getting your M1
@amaankhan-wh6be7 ай бұрын
Hey, I know it's been 5 years since you uploaded this. I actually saw your vid a couple years back and came to it now that I can get a motorcycle license. I was wondering if for the M2 safety course/test you need to buy riding gear? If so where should I look?
@MotoBikeMike7 ай бұрын
If you can I would go to Royal disturbing. They have great prices and the employees can help you get fitted proper
@J.C108 ай бұрын
Great video mate thank you 👏🏽
@zacharyboles85118 ай бұрын
My pump only kicks on if I bypass the fuel pump relay. Killswitch will turn the pump on and off if that relay is jumped. Any ideas ? Mines a 03. Ignition diode is bypassed. Tip sensor is bypassed.
@joshpowell91997 ай бұрын
I’m having the same issue! Have you figured out the problem?
@Karylinn.Kennedy5 ай бұрын
@@joshpowell9199Any luck? Having the exact same problem too
@gcphian8 ай бұрын
1 down , 5 up to reach 6th gear
@MotoBikeMike8 ай бұрын
Yes on regular stock motorcycles, but not on my bike. 1 up 5 down to reach 6.
@joericdelaney8659 ай бұрын
Got a 2013 crf 250L no fuel pump prime and no spark
@cteubner9 ай бұрын
Hi, I have an 04 CBR1000rr and, the FI fuse keeps blowing. Disconnecting the ECU, it doesn't blow. I had this issue about a year ago, changed ECU and it fixed the problem. I have the problem again. Hoping it isn't the ECU again, these are expensive. Last time I checked the bike over, I couldn't find any shorts, so almost clueless why this has happened yet again. Disconnected the regulator / stator. Fuse stays fine. Would appreciate some guidance if you could. I am thinking there is a serious short somewhere. Bike died when I was out for a ride. Battery extremely hot. When I was out for that ride, the battery already stopped charging, so I had to bump start it. After a while it completely died and now this fuse blows :(
@leerockarolla9 ай бұрын
Hey, thank you very much for the video. It was exactly what I was looking for. Very informative. Love the Blue Jays toque 🇨🇦👍🦫
@MotoBikeMike9 ай бұрын
Go Jays Go 😂
@WesFrazier9 ай бұрын
What size Allen is the bolt on the gas line to the tank
@taufiktaufik18610 ай бұрын
Just want to ask, if convert to gp shift does the quick shift still working? Or need some adjustment because it will pull different direction
@MotoBikeMike10 ай бұрын
Quick shift works the exact same, no adjustments needed when swapping over to GP shift. Just install and that’s it. Only changes the mechanical parts and no adjustments needed.