My has the same problem no start no crank I check with the scanner but don’t show any code …🤔✍🏼✍🏼✍🏼
@user-nk9vz2yp9t17 күн бұрын
「そして・・」が多い。
@rowdy383718 күн бұрын
I can only see… hope! 😂 Great video! Thanks!
@JV839122 күн бұрын
This guide was a great help I have just installed a front dash cam on a BMW X5 E70 Australia model, Fuse #10 is a bit difficult to reach so I used Fuse #19 which also has 5A fuse for my hardwire kit.
@cookumtwo390123 күн бұрын
I got the 2 main bolts loose on the back but starter will not come off … could I have removed the wrong mounting bolt at the top?
@autowestend23 күн бұрын
Could be. There are the same size bolts that hold bell housing. Taking a reference of the main bolt locations with the new starter and the distance between the two bolts would help you out. Hope you get thru this 💪💪💪
@cookumtwo390122 күн бұрын
@@autowestend appreciate you this video got me there 💪🏾 I’ll take another look at it soon. I was just happy my socket finally locked on to something up there😂
@cookumtwo390121 күн бұрын
Update the starter is replaced still no start bt it’s got a little crank to it now💪🏾
@corridosbarron356613 минут бұрын
Nice video how long does it take ?thanks
@autowestend9 минут бұрын
@corridosbarron3566 About 3 - 4 hours with filming the footages at the same time 🎥🤙
Great job 👏 Please show how to remove the headlight assembly from the E70 X5 . Thank you 🙏
@autowestendАй бұрын
I know that's a time-consuming one... I don't have plans to remove them for now, but if I decide to replace the lens or upgrade Angel eyes, I'll do it on this channel 💪
@joshhansan-bj6juАй бұрын
@@autowestend thank you so much
@arunprasadh1929Ай бұрын
Nice work. Love the sound of the engine start with the new starter. Your channel is like a repair manual for me since I’ve the exact same X5 but 2009.
@autowestendАй бұрын
Yes! X5 4.8i buddy! Thank you @arunprasadh1929 as always!
I have a 2014 535D and am doing my research to connect my next base hard wire complete front and rear Cameras 👍🏿
@autowestendАй бұрын
Cool, hoping your installation is going smoother than mine 🤙
@owenmorrrison6047Ай бұрын
Great job, your patience paid off 🙏🏿🙏🏿
@sahraoui8880Ай бұрын
Bonjour C est une version CCC ou CIC.sinon bon travaille 👍
@autowestendАй бұрын
Thank you! Mine is CCC version 🤙
@griceldaanaya-wt5wxАй бұрын
Mine works only on the second driver but not on my profile how can I fix it
@autowestendАй бұрын
That’s weird huh. I don’t know how to fix that 🧐
@prberliАй бұрын
Good job, and nice video :)
@autowestendАй бұрын
Glad, appreciate it 🙂
@takahashishin1127Ай бұрын
とても分かりやすい動画です。これを見て自分もエンジンルームやってみようと思いました。
@autowestendАй бұрын
ありがとうございます🤩
@ANTandTEC2 ай бұрын
Looks kinda nice. What about amber LED..?
@autowestendАй бұрын
Yeah, I might go switch colours back and forth, including amber. Probably I’ll try yellow LED next 🤙
@jesuschue114510 күн бұрын
@@autowestend hi! i like the piaa yellow, is everything still working well? the headlight lens weren't affected for the heat of this more intensive color?
@autowestend10 күн бұрын
@jesuschue1145 Thank you for watching! Still working well and its original Angeles eyes were also halogen, so seems no heat issue till this day. This yellow is definitely deeper and thicker in yellow than yellow LED 🤙 I might try PIAA vs LED side by side someday for comparison
Great video, thanks for sharing and going thru all the pain for the rest of us!!!
@autowestend2 ай бұрын
Glad you liked it! But now these bushings started leaking the fluids... Thinking of replacing them with solid rubber bushings. I need a bushing tool 😅
@svetoslaviliev68193 ай бұрын
Hey, great video! But why is there no info how do you get the wiring from the tailgate to the headunit upfront? Thanks
@autowestend2 ай бұрын
Thank you for watching! A previos owner has installed after market backup camera, so I just used that wiring from the rear to the headunit upfront. But I did similar routing process before in these videos. Hope these give you some ideas kzfaq.info/get/bejne/jNGaZauV2rvMo5c.html kzfaq.info/get/bejne/js-SnpOlz7q9nmQ.html kzfaq.info/get/bejne/m8x7msmiqMzMl5s.html
Did not work good on your flairs, because you was lazy to remove the wheels 😅
@autowestend2 ай бұрын
That's right. Man...I'm too lazy...
@TheHOSHA203 ай бұрын
Just remove the wheel bro.
@autowestend2 ай бұрын
Word...😅
@mydc22003 ай бұрын
Do you need wheel alignment after chaging the thrust arm?
@autowestend2 ай бұрын
Some say it is better to get alignment. But I'm thinking of getting an alignment after replacing the worn-out tie rod since replacing the thrust arm doesn't affect the alignment dramatically as the tie rods 🤔
@takatoshiozaki73043 ай бұрын
故障かと思ってヒヤッとしたのでめちゃくちゃ助かりました
@autowestendАй бұрын
参考になり嬉しいです✨
@chasew.l.58083 ай бұрын
Nice vid! What kind of symptoms did you experience before changing the control arm? Does the wheel not go in straight line once you let go of the steering wheel? Thankss
@autowestend3 ай бұрын
Thank you! More like annoying vibrations when going over even a tiny bump on the road. Feels like the car is always shaking, except when driving on a really nice surface
@syahazizi38614 ай бұрын
What problem actualy, how u fix it
@autowestend4 ай бұрын
Mainly the donut-shaped rubber parts right on top of the strut mount and worn out bushings and ball joints on tension struts 🤙 And I’ve uploaded some videos of them a while ago
@syahazizi38614 ай бұрын
@@autowestend oic...which one of video, can i know..because my car as same problem
Really enjoyed the video. Im about to tackle this project this coming weekend. Where were you able to locate the torque specifications for the job?
@autowestend4 ай бұрын
Usually, torque spec info is online, typing BMW workshop manuals or similar phrases. And look into the Tightening Torque section. But these databases are tend to be huge volumes, so take a time to locate the specific page. Meanwhile I’ll post in the video whenever I come across finding one 👍 Good luck with your next project 🤙
@stevecooper66534 ай бұрын
lol lol I’ve got exactly the same Blo-y squick on mine.4.8 V8 E70 2007 every morning the same until I’ve traveled about 10 miles then it gos..so will be replacing the belts first and see if that works thanks for the vid 👌🏻🇬🇧
@autowestendАй бұрын
Thanks for sharing. Yeah, feeling refreshed after replacing one 🤙
@stevecooper6653Ай бұрын
@@autowestend sorted it I did put a new pulley tensioner on and belt but that wasn’t where the squick was..it was the Alternator BELT 🤷new belt BLISS sorted 👌🏻
@dsperlich254 ай бұрын
Did you have an extra wire from the original display? It’s is the one with the slide lock
@Bertistuff4 ай бұрын
What head unit is that
@autowestendАй бұрын
It’s 12.3 inch android head unit. Here’s the installation vid 🤙 kzfaq.info/get/bejne/m8x7msmiqMzMl5s.htmlsi=00iwlf8nhdX46yS9
@Danza_tim4 ай бұрын
What is the camera link so I can buy jt?
@autowestendАй бұрын
It came with this head-unit in this video below. kzfaq.info/get/bejne/p6toZ6aisbyxoqM.htmlsi=8DCMLMMNLB6e_ZQb In case it’s not available, here the similar products 🤙 s.click.aliexpress.com/e/_DltQM8f
@HV718514 ай бұрын
Good video, thanks for sharing, and for the tip on the ball joint separator, it’s a great tool. You may also want to try using a penetrating spray like “Big Shot” on the ball joint, you will find that it should make a big difference in helping dislodging it.