Do you use the compost only for plants or also for growing vegetables?
@ArkWorks11 күн бұрын
For veggie plants
@johnnytigs850324 күн бұрын
Really easy video to follow. Thanks for making
@Copt77429 күн бұрын
Love it, you did everything safely and securely. Great use of spacers !
@suedavis4467Ай бұрын
Incredible job awesome
@suedavis4467Ай бұрын
Greeeeeeat work ty
@rondail56752 ай бұрын
Thank you for the video. Is it still sealed now after 3 years? Was is hard to inject over thin cracks?
@ArkWorks2 ай бұрын
It is sealed and dry after 3 years, it went through good amount of snow and many rains over the 3 years, I did not put the insulation back yet as I am in no rush, may be I will do a review video sometime before I close it. It was not hard to inject, mine was around 1/8 of inch cracks at some places and some places less than 1/8. I am satisfied with the product and outcome of the work. Hope that helps
@patrickdriscoll99622 ай бұрын
clean design
@dchambers9863 ай бұрын
Nice video!
@mfredricknew3 ай бұрын
you did not say what size bolts and size nuts you used. the links take us to assortment packs
@ArkWorks3 ай бұрын
Hello Mike, I think I brought them from Lowes, stainless steel screws and nuts. Assorted pack from Amazon should work. Try in Lowes if the assorted pack does not work for you.
@josejimenez-sy5pd3 ай бұрын
Thanks for the good video
@muktikumar88054 ай бұрын
Mast sciren hat chotu reply
@markthomas38584 ай бұрын
Great video, thanks for sharing
@EarthredPortman6 ай бұрын
Thank you for the great video! Awesome work guys! You helped me a lot!
@ryry82109 ай бұрын
Awesome video. Be sure to wear a properly fitted respirator when working with concrete dust and toxic fumes. Also make sure the correct filter cartridges for the working conditions are used with the respirator. Wear eye protection as well.
@1stetson579 ай бұрын
This is good. I made one just like it and it works great UNTIL it starts to get full. Then even though the compost inside fills only a 1/4-1/3 full it is HEAVY and then the casters put perma dents in the barrel and you can hardly roll it. I even put on several handles to pull on. So.......... back to the draw board. Breeds flies like crazy too. Not sure if it is worth it or not yet.
@ArkWorks9 ай бұрын
I could fill only half before it got heavy, no damage to bin with the rollers yet :-), don't think we can fill more than half of it
@ChefCrys0110 ай бұрын
Great tutorial. How well does it work and would you do anything different?
@ArkWorks10 ай бұрын
works well, need to rotate daily, I wouldn't change anything for my simple use case
@chrisarch475811 ай бұрын
Great job, boys!
@ParaisoDeLujuria Жыл бұрын
great video! Thank you
@MaxyG Жыл бұрын
Do you need to cover up the injection holes after knocking the m off?
@ArkWorks Жыл бұрын
Max, We did not, and in my mind it is better to NOT cover to monitor for any moisture in that area, mine is completely dry and no leaks after this work couple years back.
@Nairb932 Жыл бұрын
Good video, nice job!
@cmw1riternboro Жыл бұрын
Beautiful
@Cpsvids Жыл бұрын
Thanks - very helpful!
@lohengrinknight Жыл бұрын
The pros charge about $1500 for a job like this.
@salamancadingding Жыл бұрын
What a simple and useful tip. Great job 👍
@Lensman64 Жыл бұрын
Very well done video PLUS you used the right safety equipment. One suggestion for lining up the plastic ports: You can use a long thin screwdriver or wooden skewer to guide them into the crack and keep the channel free from epoxy. You can also drill out a portion to give a better injection site but make sure to flush it out with water.
@ArkWorks Жыл бұрын
thanks and good suggestions, I am hoping I don't have to do this again :-)
@olivenlimeforever Жыл бұрын
Desk looks so beautiful
@loghomebuilder407 Жыл бұрын
This my next project. Thanks!
@themaysgroup Жыл бұрын
Very clear and concise. Looks like I have a weekend project. Great job!
@joeaguilar-teacherofthewor4166 Жыл бұрын
You saved me! Did not know it was so easy. Thanks.
@dinacasanova9074 Жыл бұрын
This is the best DIY compost bin I've seen so far and it looks great too! Thanks for sharing your video on how you made yours. I'll be making one soon.
@ArvinRosales03 Жыл бұрын
of all the woodworking video i watched, this is the most simple but accurate. how ironic the video came from a kid. good job!
@jayking3898 Жыл бұрын
Great job little man. I started woodworking when I was about your age but not knowing the tricks you know, you’re going to be a master carpenter in no time. Looks like you have great support and coaching as well. I know I’m late to the party but these skills will stick with you forever and then hopefully you will pass them onto another young person. Im proud of you and I don’t even know you.
@tinyhydrogreens1932 Жыл бұрын
The use of the tape to mark the center of the wood was very smart.
@nickpanhead7209 Жыл бұрын
Nice video guys, good job. I have more of a structural crack, and I'm using the epoxy injection. Hopefully this week I'll be applying the ports.
@ArkWorks Жыл бұрын
Good Luck!
@werted1 Жыл бұрын
Great instructions. Thanks.
@U2BER20122 жыл бұрын
Good Job. is that 1/4" final plate board over 3/4" board behind that? Which wood species is that?
@ArkWorks2 жыл бұрын
yes, 1/4" over 3/4", 1/4" is long peice covers at least two 3/4" pieces. Don't know wood species, I had to install it back which was removed, did not purchase.
@rachelreddy25102 жыл бұрын
Great job!! Looks really cool
@emmaoko43102 жыл бұрын
I love this kid! I actually do. Plus, that tip you gave me @ 1:05 is exactly what I needed. Thanks kid!
@jacksonfraser6362 жыл бұрын
Perfect video! Thank you very much!!
@cfmg20082 жыл бұрын
So I am 32 years young and I was born today. Great job young man. Good job 👍
@ArkWorks2 жыл бұрын
Frias, Happy Birthday!
@chevers692 жыл бұрын
Smart kid. Well done.
@gaylenebalon4732 жыл бұрын
This kid!! Love it!
@debcecotti82732 жыл бұрын
Thanks! Best video on brackets!
@henrygarza80182 жыл бұрын
Right on kid good job
@nicolelitschauer57672 жыл бұрын
Love how simple this was put talk about a home improvement game changer LOVE IT THANKS KID NOW BUILD YOUR WIFE A HOUSE WHEN YOU GROW UP BELIEVE ME SHE WILL LIVE U FOREVER IF U HANDLE THE HANDY WORK AND SO SHE ISNT YOUTUBING STUFF ON HER SAT MORNING LOL
@nicolelitschauer57672 жыл бұрын
I meant love lol love you forever I already love u forever for teaching me the stuff my dad never got the chance to thanks guys lots of love. From Oregon
@thethrill28772 жыл бұрын
What’s the product called
@ArkWorks2 жыл бұрын
amzn.to/3EeLQDI RadonSeal Concrete Foundation Crack Repair Kit (10 ft) - The Homeowner's Solution to Fixing Basement Wall Cracks Like The Pros! Product seem to be working, no leak so far into this winter, looking promising.