I live near cresson. Nice town. In the summer I go there to hike because it is cooler. In the fall it is very pretty. In December I visit because they always have a white Christmas when no one else in the area has any snow. In the spring……wait, some year I have seen snow in May.lol

Thank you For updating us on this Honda issue. I want to share my thoughts and my experiencing that I'm having. I did get recalled repaired but I don't know if the valves has been adjusted and how would I know? I'm not a technician that's questionable second thing is that I've noticed with gas line valve in the off position I was able to run my mower for five days and noticed that it's possibly defective. Also I'm also noticing with the valve on of course it has encounter an idle issues, revving up and down possibly carburettor issue or something else with the recall Repair that's causing this issue. I've only had mines for about nine months. It's kept in the garage and clean no debris in the filter.etc I think Honda should've been changing out these lawnmowers or refunding the customers that are affected by these models that encounter too many issues

Why the gear is made with plastic pvc and with the heat gets deformed melted the inside the engine and not only arrive the return of backfire and goes inside the carburetor from the Honda engine and from the carburetor goes to fuel tank you are screwed

So what is the lower fill port for on the left side of the engine?

I'm waiting on Amazon to deliver my new Sending Unit for my 2000 Tracker TV-18. Gas gauge "seems" to function, so hopefully replacing the SU will be successful like yours!

The old Briggs flat head with primer start are about bulletproof. Maybe not quite as fuel efficient as over head valve but a darn good engine.

Just got my bx. There was a hydraulic line loose on the front and it leaked fluid. I tightened the fitting and it’s no longer leaking. What fluid do I check to make sure it’s not too low? It was a line up front to tilt the bucket

Stupid scam shit

They stopped producing honda gcvx with camshaft in steel only put inside camshaft in plastic pvc

Still waiting on your reply to my last message

Oil capacity is 0.55 litres which is roughly 18 oz? I’m confused about the 12.5 oz.

Hi, it’s me again that just left that message about the second dipstick on the left side of the engine. I was mistaken. I wasn’t at my tractor when I left the comment but now that I look, it’s not an extra dipstick but an extra oil fill port.

What is the second dipstick for on the BX 2670 engine that’s down lower on the left side of the engine

Same as 3300 psi Ridgid Pressure Washer, even the wand same as Ridgid just injected moulded different color

So meticulous and careful of doing things. Love it !!!

Thank you for your video. I have the same model, brand new. I like this mower but having some issues with mulching and wonder if you are having the same problem. When the clipping director is fully closed for mulching, there is a small gap such that clippings fill up the chute. Looks like a bad door design and wonder if you know a fix for this. Thanks

Great vid. Very well paced and informative - thank you :)

I have a three year old HRN216 and when I heard they were dropping mower production, I quickly purchased a new HRX217 for a back up just in case. I'm good for life! I've had nothing but Honda for over thirty years...

“Gulp of oil”…yum! 😀 Well done video, thank you sir.

Thank you for being so honest and helpful, that just made me change my mind about it, so I was thinking about acquiring one for my own use. Forget about it ! 🙏🏻

I'm glad I bought my HRX a few years ago. In my 60s and I plan to make it last until I die or can no longer mow my own yard.

Thank you so much!!

HRX series is so easy to repair at home by yourself and when empty for oil fill a little clean oil and pour it out again to flush it clean

That little hook at the back is gonna hurt if you slide off the rail😢😢

Whatever. Im still buying one.

More content like this? What is the recall? Lol

I did this but my gas kept leaking out so I suggest you run it dry first. If you don’t get ready for gas everywhere or it just might have been me. 😂

Short, sweet, and to the point! Thank you.

I have had my Honda mower since 1994. Still starts on the first pull. More than I could ever say about any of the Briggs engines I have owned. Honda had always stood behind their products. I’m certain this will be addressed soon.

Screw all these companies! I'll buy a few goats.

Im looking at toro/honda combo mower recycler 22 push mower on marketplace. I cant find any info on it at all. Im a Grandma buyong for my 14 yr old grandson to walk atound neighborhood to do lawns so he has his own. Any help anyone vould provide is so appreciated!🙂 Thank You

Had an HRX217 with one of those plastic (Xenoy) decks. The deck cracked after about 10 years of residential use. Honda denied the lifetime warranty for the deck because i made a simple modification elsewhere on the lawn mower which they said "voided the warranty". The modification I made had no impact on the deck. This mower was the most expensive and shortest lived mower i've ever owned. I will never ever purchase another Honda lawn mower.

It’s beyond ridiculous that even decent manufacturers are putting out this plastic junk. I saw that John Deere is selling lawn tractors and zero turns with plastic transmission housings??? It shouldn’t cost $2K for a good lawnmower.

Nothing these days is built worth shit. Take me back 20 years ago when there was some quality

The Honda small engine for Mowers and pressure washers are the best I have ever had

Most lawn mowers don't have decompression at all. Sounds fishy, Honda never really made much lawn equipment anyway. Japan is not really know for having large lawns. It doesn't surprise they might bow out of the lawn equipment game. I don't think the Chinese are really into lawn care either. When it comes to making lawn care equipment for Americans they do a piss poor job, they don't care. The best lawn care products are American made cause we are the country with big manicured lawns. It's an American institution, So Buy American made.

Bought my Honda mower in 2000. It's still going strong but back then they made all the parts and it and it's an OHC. Not sure where it was made. Start's like a dream. In fact it the harder you pull on it the less likely it is to start. The store brand mower I had before the Honda is still going too. It's 30 YO and has a B&S motor but it's always been a finicky thing to start. Why have they lasted so long? Change the oil and clean the air filter every year and use a quality oil. Simple as that.

My new Honda mower is garbage. Bag falls off, Mulch Bag lever broke, Mower is back loaded, Pinch points with self-drive, Garbage.

I bought one of these Honda lawnmowers at the end of last year. Used it maybe five times. Did everything that you’re supposed to do and at the end of the season, I dumped out the gas and did all that wonderful stuff. This year I take it out and I can’t even crank it. Finally managed to get it to run for 30 minutes and I shut it off and went inside to get me a sip of water and use the restroom, went back out to finish up my yard and I could not crank it back up. I have not been able to crank it back up and that’s been several weeks now. I do have the electric start one which would not start using this way and pulling the cord well I almost tore off my arm with it so that’s out of the question. So now I’m going to have to load it in my car and take it to a Honda lawnmower repair place. This is ridiculous. I paid a lot of money for this lawnmower thinking that it was going to last me a long time just like my Honda car. But I am really disappointed in this purchase. Honda needs to just give all our money back and let us go and purchase something else.

Why won't they. ffs

Why does my manuel say use 30 under detergents oil ?

I looked for a drain plug and cut your video after looking it up. Thanks for the great sound and image quality. I bought the mower for my mum, who is 83yo and I'm sure she also thanks you for the help. People at the dealer were not so cooperative.

Excelente video, muchas gracias.

My Troy Bilt riding mower has a Briggs and Stratton Intek engine. Many of them have a problem with the decompression cam breaking. Locally that's an $800 repair, although the kit is only about $100

I just bought new hrx217 today to repiace my 12 year old hrx217 with broken transmission. This is helpful information as I always screwed in the dipstick while checking oil level so I was underfilling.

My 3 year old Toro mower with Honda engine works great. But I live in California, and the governor signed a bill that bans the sale of gas engine lawn mowers starting after 2024. So before the year is over I plan on buying one or two more lawn mowers, just to have for the future.

Never a fan- Get a Toro. Jacobsen should reenter for home owners.

The one i bought yesterday, just went from $799.99 to $699.99 overnight. Going to the store now for a price adjustment.

Around here, if you bought it at a big box store, the dealer wouldn’t touch it. They tell you to take it to where you bought it.

Have a partial tare in my rotator cuff as a result of issue. First I’ve heard of recall. Will check serial number tomorrow and try to get it fixed