Күн бұрын
Ай бұрын
Ай бұрын
Ай бұрын
Ай бұрын
2 ай бұрын
2 ай бұрын
2 ай бұрын
2 ай бұрын
2 ай бұрын
2 ай бұрын
2 ай бұрын
Пікірлер
@user-hh3ww2cr4h 2 күн бұрын
no i2c device address at 0x40
@techs.passion 2 күн бұрын
Is that the error code you are getting?
@ninjaoftherift1620 3 күн бұрын
@siemens I'm 24 and a computer engineering student I really like CAD tools and designing things especially electronics more then mechanical stuff is PCB design only CAD based computer engineering job?
@techs.passion 3 күн бұрын
I would say PCB design is definitely not the only one. You have so many CAD such as AutoCAD for buildings etc...
@ninjaoftherift1620 3 күн бұрын
@@techs.passion even for CE?
@techs.passion 2 күн бұрын
Yeah I would say so. Plenty of CAD work other than PCB design
@ninjaoftherift1620 2 күн бұрын
@@techs.passion do you know any terms or examples I can research ?
@techs.passion 2 күн бұрын
Yeah, unless I missed understand you. But you can look for 3D model design, Home design, so many things CAD is used. PCB is one of them but also you can look into CPU design or chips in general. When you say computer engineer, do you mean hardware? I'm a software engineer myself but are you looking for a job that allows you to use CAD skills? if so which CAD like Fusion 360? AutoCAD?
@samiqra1538 5 күн бұрын
No need this much of technology simply use flot switch
@techs.passion 5 күн бұрын
Yeah that's true, the main purpose is to learn and also this would give you more flexibility to expand on the functionality
@haris6199 5 күн бұрын
And how can i make
@techs.passion 5 күн бұрын
This is how you can make it kzfaq.info/get/bejne/i6mYaa2oxMeuknk.html
@haris6199 5 күн бұрын
IC Driver name
@techs.passion 5 күн бұрын
I'm just using an Arduino
@RA24G 7 күн бұрын
Please tell me, can I give 12v current in this?
@techs.passion 7 күн бұрын
Current is in Amps and not in volts. If you mean can you power it on 12v I would say yes but not this model however you can convert the 12v to 5v and that should work
@Nb_2089 7 күн бұрын
Now I can make myself a cup of coffee that screams, suffering until I drink it all
@techs.passion 7 күн бұрын
Hahaha you can use temp sensor is best for that idea. It would be fun to make that
@Nb_2089 7 күн бұрын
@@techs.passion Temp sensor would stop it from screaming if it got cold enough. what I thought of was to have it scream until it’s over
@techs.passion 7 күн бұрын
Fair point, it's hard to make it using the water sensor, while it's possible I wouldn't want to drink from that. I will post this idea in my free discord, I like to think about it more and see what we come up with then maybe we make it
@techs.passion 7 күн бұрын
we are discussing it on my Free Discord: discord.gg/FgVJYEUEXs
@Ksaroko 10 күн бұрын
exactly what im looking for thx hope that will fix my problem. my printer wont start moving even if it seems to be heated up and everything, all the steppers are working aswell and the whole extruder is new (mk8)
@techs.passion 10 күн бұрын
I'm glad you found it helpful, let me know if you need further help. Thanks for watching
@kenpope5701 11 күн бұрын
Just needs to jump now and itd be identical to a jumping spider
@techs.passion 11 күн бұрын
Hahaha yeah, that would be cool. Thanks for watching
@johnprzybysz3845 11 күн бұрын
If you could adjust the rate of flow this could be very useful for resin 3d printers. Sometimes a person will make prints that need more resin than can fit in the vat.
@techs.passion 11 күн бұрын
Absolutely, great idea and yes for sure possible
@user-ww3uh7vp1e 12 күн бұрын
এটা কি
@techs.passion 12 күн бұрын
Mist maker, thanks for watching
@DANTEJao 12 күн бұрын
Hi mine doesn't work anymore,, but its still new😔
@techs.passion 12 күн бұрын
Dang, maybe return it or tell the seller to help with a new one
@Bruhwhatthesigmaohio 12 күн бұрын
But I put my finger on my diffusers and it felt really hot. So it just vibrates at high frequency?
@techs.passion 12 күн бұрын
That is correct, there is no heat to make the fog you see. Thanks for watching
@jamesbarrett6581 14 күн бұрын
What firmware did you have before you did this? The only numbers I can find are 1.1.6.2. I can’t find anything about marlin or 4.2.2.
@techs.passion 14 күн бұрын
Well it depends on your motherboard version, if yours is the 1.1.x.x then this method will not work for you This will work if you have 4.2 or 4.7
@jamesbarrett6581 14 күн бұрын
@@techs.passion thanks that’s what I needed to know. So, I need to do the bootloader stuff mentioned in other comments then? If it’s 1.1.x.x something?
@techs.passion 14 күн бұрын
That is correct, and I'm sorry I don't have a video showing that which I should.
@user-ms5lc4dt9y 15 күн бұрын
❤❤❤❤❤❤
@techs.passion 15 күн бұрын
Thank you
@joemechanic2751 16 күн бұрын
New to Fusion... just learned about offset extrusion...game changer! Tutorial was very easy to follow and well explained. Subscribed.
@techs.passion 16 күн бұрын
Awesome, so glad to hear it and thanks for the support
@jamespittman9953 16 күн бұрын
This mist could be used for holographic purposes, and frequencies communications commands 😊😊😊
@techs.passion 16 күн бұрын
Thanks for sharing 😊
@JBCool0729 17 күн бұрын
why did you offset the large circle if you did not used it
@techs.passion 17 күн бұрын
I did use it to maintain the connection. watch it again and skipt to the extrude hinge part and you will see the small section there. Thank you :)
@JBCool0729 16 күн бұрын
you right.
@ahbushnell1 17 күн бұрын
You should have printed it
@techs.passion 17 күн бұрын
I did, it's in the Thumbnail and also here kzfaq.infolgJLjQ7S1vQ?feature=share Thank you for watching
@justinbouchard 17 күн бұрын
unreal video i followed along and built it with you even the shift happened in mine when I applied the joint lol
@techs.passion 17 күн бұрын
Glad you found it helpful 🙂
@virgiliosamaniego1389 18 күн бұрын
Please keep doing it
@techs.passion 18 күн бұрын
Thank you, that's the plan. The next part should be coming soon.
@RouxQvixote 19 күн бұрын
Exactly what I am doing without good results so I think I will add some extra steps for myself: - Go back to a firmware without auto leveling - do the usual old fashioned bed leveling - confirm leveling with some printing test - change to firmware with auto leveling and negative Z limit - do auto level - continue your step of findind the distance my nozzle touches the bed What I haven;t tried of your video: heat the bed (I will try this too) I hope to get good results
@techs.passion 18 күн бұрын
Hi, I'm sorry you are having some issues with the bed leveling. I hope this works for you, I also have a full video about how to install the CR touch from scratch which you can skip to the leveling part, let me share that here.
@techs.passion 18 күн бұрын
kzfaq.info/get/bejne/h7pykrN91s_Yd30.html
@schmi146 19 күн бұрын
Good explanation, I make my hinges this way too. Further topics in this vein: print orientation you want to print the hinge axis vertical, add fillets to increase the range of motion, move axis to increase the range of motion.
@techs.passion 19 күн бұрын
Thank you so much, I'm still learning and this is helpful. I appreciate it
@ejiorigami 19 күн бұрын
thanks bro this is the most clearest hinge tutorial i ever seen!!
@techs.passion 19 күн бұрын
That's my goal, glad you think so. I appreciate it
@acservicecare2423 19 күн бұрын
Please send your location and mobile number send me
@ghostlygameplayz3583 20 күн бұрын
You should make a bed scraper so u don’t scratch up the surface
@techs.passion 19 күн бұрын
Thank you so much, I was for sure being stupid
@watic1 20 күн бұрын
How do I set it up
@techs.passion 20 күн бұрын
Download a free app on your phone and you can write to it then you can read it from any phone, all should be free
@oimichealroblox2387 20 күн бұрын
Hello I’m wondering about some tech you may have, please get back to me asap and great video 😅🎉
@techs.passion 20 күн бұрын
Hi, thanks For sure how can I help?
@oimichealroblox2387 17 күн бұрын
@@techs.passionhey I got paused for spamming this message but it’s for a reason, i want to see if I can get a kit of random electronics from you, as in circuit boards, components, etc. I am 17 years old and hoping to get more into electronic engineering, I just don’t have enough pieces to form things together. 🎉
@techs.passion 17 күн бұрын
Hi, Yeah no worries. Did you submit for my giveaway video? also are you in the united states, reason I'm asking is the shipping is easier since I'm in the US. Let me know and I will see what I can do. I recommend you subscribe and join my Free Discord to learn more when I do giveaways but let me know and I will try my best. Thank you
@techs.passion 17 күн бұрын
Free Discord: discord.gg/FgVJYEUEXs
@2braincells581 20 күн бұрын
They made detachable mats, so you can just bend it off to detach it instead of using a pocket knife. Also wait for it to cool next time
@techs.passion 20 күн бұрын
100% I was being stupid. I don't like the glass bed for many reasons and that is one of them.
@2braincells581 20 күн бұрын
@techs.passion Yeah. It's ok, bud. Remember to ALWAYS let it cool first. If you peel it while it's still hot, it'll deform and be ruined, and you wasted time and filament because of lack of patience
@techs.passion 20 күн бұрын
Thank you so much, very helpful :)
@jasonmeyer6048 20 күн бұрын
Wow
@techs.passion 20 күн бұрын
Thanks for watching
@leonardomaddoni9870 20 күн бұрын
Interesante.. lindo para diorama de un tren a vapor..😊
@techs.passion 20 күн бұрын
Thanks for watching
@HasanHamwb 21 күн бұрын
اين اجد مثل هالقطع
@techs.passion 21 күн бұрын
الرابط بأول تعليق، شكرا للمشاهده
@ArenduinoOfficial 21 күн бұрын
İm making a real size car (really) and i need a high torque and speed GEAR ratio can you help me please??
@techs.passion 21 күн бұрын
WOW nice, I have an idea but not sure how much I can help Obviously you need to start with the high torque first to get the car going then switch to the high speed which will be a larger gear moving a smaller one but for a real car my skills is a hobby level however happy to see and discuss what you are building if you want to join my free discord here is the link discord.gg/FgVJYEUEXs
@user-ft2wj3fz3t 21 күн бұрын
great pcb design,sir. I don't know whether you need the pcb drill bits?
@techs.passion 21 күн бұрын
Thank you, I didn't really need them but I was figuring things out so I added them there. Thank you for watching. I have a full video showing how to design and order in 10 minutes
@MrCreeperrr 22 күн бұрын
What if my printer shoved krs head into the top can i use the back?
@techs.passion 21 күн бұрын
Assuming it's clean I would say so. You might need glue stick with the back but it works for me
@MrCreeperrr 21 күн бұрын
@@techs.passion ywa I tested It it works btw are you like a pro.at 3d printing? If so can you help me with some issues one has
@techs.passion 21 күн бұрын
I'm glad it worked for you. I'm not a pro but I think I do okay. For sure, I'm happy to help, ask out here or join my Free Discord, I'm always helping out there as well. Discord: discord.gg/FgVJYEUEXs
@HdySgjc 22 күн бұрын
Pressing material
@techs.passion 21 күн бұрын
Thank you for watching
@MikomiKawaii 22 күн бұрын
Thank you! Super simple tutorial and it worked well for my printer. I have never updated the firmware (cant lie had no idea I had too lol) and I have had this printer for almost 4 years lol
@techs.passion 22 күн бұрын
Glad it helped! Thank you for watching 🙂
@Anthonyvelez-dt8ux 23 күн бұрын
my stepper motor works but when the extruder goes as much as it can the motor keeps going what do i do???
@techs.passion 22 күн бұрын
Hi, sorry to hear that you are having trouble. It sounds like you have a problem with the switch that stops it, is the switch working?
@Anthonyvelez-dt8ux 20 күн бұрын
@@techs.passion do you know where the x axis limit switch is on the adventure 4 3d printer? i am having trouble finding it
@techs.passion 20 күн бұрын
Not sure about that one but I would follow the end of the axis and should be there assuming it works the same way the ender work
@user-cg3qk2uo1w 23 күн бұрын
Два металлических, по 100 ватт излучателя, напротив друг друга,с подведённым потенциалом на корпус(+, -), и вот вам генератор HHO! Причём КПД системы зашкваривает(!) Не благодарите😂🎉
@techs.passion 23 күн бұрын
Hahaha thanks for watching
@snarayanshaw6453 23 күн бұрын
Harami salo
@rebeldefmusik 23 күн бұрын
Thanks! It was really useful.
@techs.passion 23 күн бұрын
Glad to hear it, thanks
@roccocroce 23 күн бұрын
I can do a soldering. Nice
@techs.passion 23 күн бұрын
Awesome, thanks
@Manu-nr1yt 23 күн бұрын
So close to no difference.
@techs.passion 23 күн бұрын
That's true, the mistake I made is using solder that has a flux layer applied. Thanks for watching
@suplado7583 24 күн бұрын
My balls are not sticky anymore can't hold anything. Maybe it is expired.
@RECYCLING-KING 24 күн бұрын
Wow❤
@techs.passion 23 күн бұрын
Thank you :)
@mattiadelgiudice5844 24 күн бұрын
Thats useful
@techs.passion 24 күн бұрын
Glad to hear that, thanks for watching
@5yuzelli539 24 күн бұрын
i guess every solderer would want to meet your pink sticky balls.
@jonathonlyles3349 24 күн бұрын
Very handy to know Maybe do a reupload with examples on how to test on a mm bet it gets more views now that ur fan base is bigger
@techs.passion 24 күн бұрын
Thanks for the idea, I have done it in a short video but this is worth revisiting. I appreciate it 😊
@PulseRBX 24 күн бұрын
its like you didnt even use the arduino
@techs.passion 24 күн бұрын
Well, you use the Arduino to turn on and off while using external power is the idea
@PulseRBX 24 күн бұрын
@@techs.passion true😅
@skyscraperstudios8951 25 күн бұрын
It takes me 30 minutes every time to figure out what was wrong with it, but now I know just to turn it