4 ай бұрын
5 ай бұрын
6 ай бұрын
Жыл бұрын
Пікірлер
@ThePeterDislikeShow 4 күн бұрын
Does patination oil work on bismuth?
@SmellyCatCreations 4 күн бұрын
@@ThePeterDislikeShow I have no idea if I'm honest like I say never worked with it. You can only but try a small bit and see. I'm sure it would have some kind of effect
@ThePeterDislikeShow 4 күн бұрын
@@SmellyCatCreations You should try bismuth. It has many of the properties of lead like low-melting point but way less toxic.
@SmellyCatCreations 4 күн бұрын
@@ThePeterDislikeShow where do you get it from?
@ThePeterDislikeShow 4 күн бұрын
@@SmellyCatCreations Bolton Metals. You can buy 50 pounds for $400.
@SmellyCatCreations 4 күн бұрын
@@ThePeterDislikeShow I will check the material out thank you
@ThePeterDislikeShow 4 күн бұрын
Does the lead alloy into the brass? I've been hesitating about using metal molds for that reason.
@SmellyCatCreations 4 күн бұрын
@ThePeterDislikeShow no the melting points of the 2 metals are far too different so have no issues
@ThePeterDislikeShow 4 күн бұрын
@@SmellyCatCreations The reason for the concern is I know mercury sometimes messes with other metals, so I figured this would be similar. I work with bismuth by the way, which is more sensitive to being contaminated.
@SmellyCatCreations 4 күн бұрын
@ThePeterDislikeShow I have certainly never worked with bismuth. What do you use that to make?
@mrjohnnylongsleeves4128 14 күн бұрын
Well done Sir! Just got mine and your video really made things clear for me! As much as I love the Worx product line I have always found their manuals woefully lacking in detail. Thank you very much!
@SmellyCatCreations 14 күн бұрын
@@mrjohnnylongsleeves4128 your more than welcome. Thanks so much for the feedback. Will do a video soon on their hydroshot jetwash and leaf blower as been using them a while to save me time.
@CreatorJJB 15 күн бұрын
Dont think it has enough holes
@CreatorJJB 15 күн бұрын
Nice fagin gloves
@CreatorJJB 15 күн бұрын
Hope you got a fire extinguisher
@CreatorJJB 15 күн бұрын
Woah Stella!
@simonsmith7963 16 күн бұрын
Good video. You can improve your cable by adding an inline table lamp switch. Then you can avoid sparking by getting your wires connected before turning the switch on. Also you can crimp automotive spade connectors on the cable ends. These work well with batteries that have the clip style connector.
@SmellyCatCreations 16 күн бұрын
Cheers Simon, great tips thank you. I don't generally have to do this very often so it was just a very quick made-up cable but I think if I did it more often I would certainly have a nicer cable and the switch is a great option to add.
@freshbeatz7403 18 күн бұрын
How did you fix?
@SmellyCatCreations 18 күн бұрын
Cleaned and unblocked the nozzle, along with a cold pull
@neilgage427 23 күн бұрын
🔔 ⚡
@SmellyCatCreations 23 күн бұрын
🤘🏻🤘🏻
@focusfocus8966 27 күн бұрын
Fantastic explanation. You are the 1st guy I have seen fixing the hose directly from the tap. Simply superb 😊.
@SmellyCatCreations 27 күн бұрын
Aww thanks so much. I'm glad you found the video useful 😊
@focusfocus8966 27 күн бұрын
Just a quick question, this video you posted a year back, still do you use this equipment. Does it still hold good. Please confirm.
@SmellyCatCreations 27 күн бұрын
I still have the pressure washer and do still use it, yes. I am about to try out the worx hydroshot, though, as I have alot more of their batteries so I may eventually move over to using one of them.
@focusfocus8966 27 күн бұрын
@@SmellyCatCreations that's great, will wait for your worx review as well. Appreciate your reply. Thanks.
@SmellyCatCreations 26 күн бұрын
@@focusfocus8966 your welcome I will get a video made and uploaded
@rewildyourmind4334 29 күн бұрын
do you sell these free diving weights?
@SmellyCatCreations 29 күн бұрын
Hi there, I make rhe custom moulds, but I can also cast them in-house
@rewildyourmind4334 29 күн бұрын
@@SmellyCatCreations Hey , iv sent you a email about them
@trevorrichardson523 Ай бұрын
Great advice and worked perfectly for me.
@SmellyCatCreations Ай бұрын
Your more than welcome. Really pleased it helped
@joebeeston1995 Ай бұрын
Just tried this on my flashing red Ferrex battery but no dice unfortunately...will try opening it up next!
@SmellyCatCreations Ай бұрын
Ahh shame sometimes it's a little too far gone, that's not to say it still can't be saved of course
@joebeeston1995 Ай бұрын
@@SmellyCatCreations this is the thing, its not exhibiting symptoms of a flat battery, the status light illuminates and it still powers my tools, it just won't charge on the charger.
@SmellyCatCreations Ай бұрын
@joebeeston1995 might be worth throwing a multimeter onto the charger see what it's putting out
@rogerstrom1186 Ай бұрын
WELL ORGANIZED SHOP.
@SmellyCatCreations Ай бұрын
It's in the middle of a move around 😉
@callummondey4761 Ай бұрын
❤❤❤
@80ivannoel Ай бұрын
I would like to ask how to unlock the trigger, i'm having trouble with mine.😥Do you push or pull the round knob? thank you.
@SmellyCatCreations Ай бұрын
Hammer! Not sure on that one to be honest other than taking her apart and having a look I would assume its just a little stuck
@80ivannoel Ай бұрын
@@SmellyCatCreations Thank you very much!
@SmellyCatCreations Ай бұрын
@@80ivannoel you should just push the trigger lock to the right and then be able to pull the trigger back. So thumb to move the lock while pulling the trigger in
@80ivannoel Ай бұрын
@@SmellyCatCreations ok got it.. Thanks a lot! Appreciate, you taking the time to answer my question.🙏
@SmellyCatCreations Ай бұрын
@80ivannoel your more than welcome. I'm happy to help.
@davidwarnes6191 Ай бұрын
Thanks very much. It worked fine for my Gtech hedge trimmer using exactly the same batteries as in your video. I had to buy a new battery from Gtech but at least I now have two working so my hedges will look a lot better. The downside is that I won't get as many breaks from work while the battery is being charged!
@SmellyCatCreations Ай бұрын
Your more than welcome, the Gtech batteries don't last too long per charge though do they. Far easier than running a long power cord though.
@edwardkent6831 Ай бұрын
Great video !!! Did you use the saw to trim your fingernails?😂✌️👍
@SmellyCatCreations Ай бұрын
Thanks, of course I did, multi use tools and all that 😉
@Velocity0428 2 ай бұрын
What does high and low mean? High and low speed or high and low torque?
@SmellyCatCreations 2 ай бұрын
This should switch between 2 speeds gears
@Velocity0428 2 ай бұрын
@@SmellyCatCreations So it's just the speed that changes, not the torque?
@SmellyCatCreations 2 ай бұрын
@@Velocity0428 I believe so
@nickdavies1977 2 ай бұрын
Same Aldi/Ferrex battery with same problem. Now fixed thanks to your guide. Cheers!
@SmellyCatCreations 2 ай бұрын
You are more than welcome. Thanks very much for watching 😊
@sumitsaxena10001 2 ай бұрын
Waste of money 💰 product Dewalt water pressure 👌
@SmellyCatCreations 2 ай бұрын
I think the issue is not everyone can afford the dewalt brand
@playdeaths 2 ай бұрын
Noice and tidy ❤
@SmellyCatCreations 2 ай бұрын
Thank you 😊
@nexan21 2 ай бұрын
cool vid, you need to include F & S , cutters used etc 👍
@SmellyCatCreations 2 ай бұрын
A tradesman, never gives away all his secrets 🤣 put myself out of a job.
@GilbertIII-ke1di 2 ай бұрын
Your Pla thought it was tpu
@SmellyCatCreations 2 ай бұрын
No, just some badly under extruded pla, I need to print some more tpu such a cool material 😎
@CliveLowe 2 ай бұрын
Thanks this worked for me, I didn't have a spare Gtech battery so I used a Makita 18v Li battery and they are marked up + and - Cheers
@SmellyCatCreations 2 ай бұрын
Really pleased it saved another battery from being replaced 😀 thanks for watching and commenting
@dlmcbm 2 ай бұрын
Man thank you so much for making this video. I would have never figured this out from the manual. FYI I am on the Omtech silver that has the same control panel.
@SmellyCatCreations 2 ай бұрын
No problem at all, I couldn't find anything on this at all, and like you say, the manual doesn't help. I'm really pleased to hear it helped you. 😀 it's a good little controller I changed it all over when I pretty much rebuilt the laser lol
@tribble10 2 ай бұрын
This worked for me, thank you very much! I have the exact same Aldi Active Energy battery & charger and the battery was showing 3x amber lights on the test button but still refused to charge. I only have 1 of the Aldi batteries however I have lots of the Parkside 20V Lidl batteries which I used to jump start the Aldi Battery. I jump charged both the B1 and B2 sides for around 4-5 mins each side and the Aldi Battery now charges fully!
@SmellyCatCreations 2 ай бұрын
Awesome, I am really pleased to hear this helped you out and allowed you to get the batteries working again :) thanks for checking out the video and please do share with anyone else it may help.
@stuartbarrett9705 3 ай бұрын
Ferret battery’s year in the dud box just fixed thank you !!!
@SmellyCatCreations 3 ай бұрын
Your more than welcome, glad to hear it was helpful. Badly need to get some more content out. Thanks for watching 😊
@JustinGibson-sj1pc 3 ай бұрын
Do you sell them?
@SmellyCatCreations 3 ай бұрын
Hi Justin, I haven't listed them anywhere, but I had planned to. So if you want one, just drop me a message on Instagram or through my website and I can sort that out for you.
@oksle8132 3 ай бұрын
dude audio is bad and you speak too much but thx anyway
@SmellyCatCreations 3 ай бұрын
Lol thanks dude 😄
@karenbrown3343 4 ай бұрын
Great video for an older woman trying to put together her first chain saw. Thanks very much!!
@SmellyCatCreations 4 ай бұрын
You're more than welcome, and thanks very much for your comment 😀
@chipashvilinino7970 4 ай бұрын
is the FERREX multitool Carbonless engine ?
@SmellyCatCreations 4 ай бұрын
I don't think the ones with Blue trigger switches are but they have done a range with light grey triggers that are brushless motors "carbonless"
@craighayes3316 4 ай бұрын
Hello, Could ask a stupid question. I'm wanting tip my toes into the air compressor world. I wondered, I've got some skirting boards to fit in the house. 18mm skirting ( pine) which will be attached to a wall in a traditional UK house, so plaster board and breeze block. In your opinion, would this and it connected compressor be up to the job, just hold whilst the 1900 litre of no nails go off. Cheers.
@SmellyCatCreations 4 ай бұрын
I would personally say one of these would struggle with that, to be honest, as 18mm skirting alone will need a high driving force. If you check out my video for the cordless worx nailer, to be honest, these days, that's my go-to nailer. It has much greater control over deph penetration, and I use it a lot for stapling u shape staples into panels
@craighayes3316 4 ай бұрын
@SmellyCatCreations great stuff. I will watch that review. Thank you for the quick reply.
@SmellyCatCreations 4 ай бұрын
@craighayes3316 your welcome and thanks for watching 👀
@derekhawley9660 4 ай бұрын
VCarve Desktop = 28 months of CarveCo Maker. I hate subscription software ... they just dangle you on a string. I'm going to buy VCarve Desktop and if I sell my CNC, the software will go with it (hopefully getting a bit of the cost back). Plus, there is nothing to stop CarveCo putting up their subscription fee. I do agree that the VCarve interface is very old fashioned, but I can live with that. Love the beard!
@SmellyCatCreations 4 ай бұрын
Haha cheers mate, you do raise a very good point on the subscription side of things. Especially more so lately as everything just seems to be going through the roof price wise. Perhaps good advice would be start on vectrics lowest package until you find it doesn't do something you need then pay the upgrade cost. I moved to affinity designer for artwork to avoid Adobe clouds monthly costs
@RobertNeaguOfficial 4 ай бұрын
I've just tried it, but still doesn't want to charge it. Even if it got almost full 3 light battery life indicator. What should I check next?
@SmellyCatCreations 4 ай бұрын
Is your charger still rejecting it?
@RobertNeaguOfficial 4 ай бұрын
@@SmellyCatCreations yeah
@SmellyCatCreations 4 ай бұрын
@RobertNeaguOfficial I would assume its most likely due to the cells not being equally balanced, and therefore, most budget Included won't load balance them and just reject charging for safety reasons. Options are to try it on a more advanced charger with balancing connection or open it up and separate and measure the voltage on each cell
@PoltergeistHC4L 5 ай бұрын
Thanx m9 i always used grandma s extra teath!
@SmellyCatCreations 5 ай бұрын
Ooh good choice that gives a super high shine finish ✨️
@MickeyD2012 5 ай бұрын
What are they feeding you?!
@SmellyCatCreations 5 ай бұрын
Smelly food 😆
@omarjassar4650 5 ай бұрын
And the Partridge and a pear tree 😅😅😅
@SmellyCatCreations 5 ай бұрын
I was all out of those 🤣
@omarjassar4650 5 ай бұрын
@@SmellyCatCreations Darn it
@PhilsWorkshop1953 5 ай бұрын
Nice vid nice tool for light work had a chuckle over the health and safety comments and thanks for your subscription
@SmellyCatCreations 5 ай бұрын
Your welcome, thanks for taking the time to watch my video 😊
@kevinwillis6707 5 ай бұрын
Cheers for this, ive been looking for a guide on doing this👍
@SmellyCatCreations 5 ай бұрын
Your more than welcome, thanks for the feedback. If you have anything else you would like to see videos on just let me know
@junrall 5 ай бұрын
Just curious... this video is two years old... are you still using Carveco over Vectric?
@SmellyCatCreations 5 ай бұрын
Oh, how time flys. I'm using vectric at the moment, but I'm also in the middle of trying to move over to Fusion 360 for many of my jobs.
@kanebeatty8044 5 ай бұрын
Where can you buy them stamps
@SmellyCatCreations 5 ай бұрын
Just drop me a message on social media or email me at [email protected] Be happy to sort one for you 😊
@vivek-1318 5 ай бұрын
Awesome
@SmellyCatCreations 5 ай бұрын
Thank you 😊
@goldensaw8489 5 ай бұрын
Can you make me a seal for burning wood?
@SmellyCatCreations 5 ай бұрын
I can indeed. If you pop me a message on social media or through my website I will be happy to help. Smellycatcreations.com
@WoodworkJourney 5 ай бұрын
Nice. I want a little mini forge/furnace so badly 😂
@SmellyCatCreations 5 ай бұрын
Thanks, they are not all that expensive really. I mean I started with a smaller one. For lead I actually started with a camping stove lol
@frankphair4675 5 ай бұрын
That looks like something I would be interested in buying do you sell these branding irons still
@SmellyCatCreations 5 ай бұрын
Hi Frank I do indeed. To try and make life easier for people and quoting I have my most common products on my store. Shop.smellycatcreations.com Then take on all types of custom orders as well. Thanks for the comment 👍🏻 and any questions I would be happy to help.
@EclecticOmnivore 5 ай бұрын
Subscribing. There is a marked change from your earlier videos and the more current ones! KZfaq recommended one of your older videos. Instead of judging all of your videos based on YT's recommended one, I looked at your current videos ... and they were superior! If I went with only the recommended videos to judge your channel, I would not have subscribed and likely would have marked your channel as "do not recommend". That's not what I did ... and I do recommend your channel! With that in mind, take a look and consider removing the videos that aren't as current *and* that could be improved. If the videos are already fine, of course, leave them alone. This is a recommendation, not a demand, after all! I admit I could be wrong in some minor or even major way. Corrections are appreciated!
@SmellyCatCreations 5 ай бұрын
Hi there, I really appreciate that feedback and you taking the time to checkout more of my videos. I have tried at least with more recent ones to make the editing better, along with making them shorter and more straight to the point. Would love to hear your feedback on the older ones you think would be better off taken down. Thanks for your constructive comments.
@stevealharris6669 6 ай бұрын
Had a home setup appointment today - no one turned up ,to say i`m not happy would be an understatement.
@SmellyCatCreations 6 ай бұрын
Kick up a fuss mate, I would be annoyed as well. Sorry to Hear that. All I will say is mine has still been super stable and had no issues since the few at the very start.
@MrNuts1985 6 ай бұрын
You can get 2 40v batteries for £56 delivered of Ali express I got the drill and driver for £30 on sale so 86 for the lot and they are brilliant Aldi make the money on the batteries which is why the tools are so cheap as you can get a whole system and will keep going back to Aldi for batteries and then buy shopping also it brings more men on to the shop it's very clever marketing really as once you have a few batteries you're invested in the system so if one does brake you'll just replace it and not change brand
@SmellyCatCreations 6 ай бұрын
I must admit once I get a system with a few tools and batteries I do hate having multiple brands as just all the different chargers are a pain enough. One brand often doesn't seem to offer all the tools I need which is the issue. I still use the Aldi angle grinder daily and it has yet to let me down, so for the price I paid im well happy with it.