AGB Art

Пікірлер

@handsomerob1223 Күн бұрын

What? Copyright infringement for the card to play the game? How do you “replay” the game?

@agould105 Күн бұрын

When you buy the card you use it to play the game. I chose not to use an official card in my videos. I’m not sure I understand your second question.

@johannaramos7644 13 күн бұрын

Thank you for your video. I have just one question. Do you need to bake when you use the triple thick?

@agould105 12 күн бұрын

@@johannaramos7644 I do not bake it. I do let it cure though I would say a week. Then hand wash only.

@ninaanns7226 27 күн бұрын

Am new to making washi earrings. Loved how simple they are to make. Easy to follow your instructions as well. Have subscribed 💕

@agould105 26 күн бұрын

Thank you for subscribing. I really like making super simple crafts that end up looking very pretty.

@karenmclaughlan9128 Ай бұрын

When I tried pouring the paint to make skins they all cracked and I couldn't lift them up. I only added a little water to the paints

@agould105 Ай бұрын

I’ve had really good luck with my paint recipe. I have found that when the paints crack, it’s because one layer is drying quicker than another layer. So you might want to cover whatever you have painted on with something like foil so that it doesn’t dry too quickly. If I remember right, I don’t try to peel the paint up at least for a week.

@karenmclaughlan9128 Ай бұрын

@agould105 The paint was all cracked and that was after only 48 hours. Couldn't use it as skin

@agould105 Ай бұрын

I’m sorry to hear that. I’d try revamping your paint recipe and not letting the puddle dry too quickly.

@WikidlySexz 2 ай бұрын

I have a question... your paint puddles seem a little thick from other videos I've watched. Can the pain be spread out a little more with a spatula for the main dominant puddle?

@agould105 Ай бұрын

Sure it can. I need my puddle to be thick. I think doing the skins involves a lot of experimenting.

@katanajay5535 3 ай бұрын

What were your final thoughts? Was this just regular gloss I purchased a high gloss of this brand today haven’t used it yet

@agould105 3 ай бұрын

I still have the canvas I used this varnish on. I think it yellows over time. I prefer using Liquitex glossy and water at a 50/50 ratio. Several light coats

@margaretskoog1919 3 ай бұрын

Is the product you use Dupli Color Engine Enamel Spray DE=1636?

@agould105 3 ай бұрын

I don’t know the serial number. It has a red lawnmower on the front and says “up to 500 degrees.” I bought it at O’Reilly’s Auto store. Hope this helps!

@margaretskoog1919 3 ай бұрын

I like to decoupage napkins on tile coasters. Will this product work to make them heat resistant? Also, i wish I could have seen the front of the can you recommend. I don't want to buy the wrong product at the car store.

@agould105 3 ай бұрын

I don’t know about using it with decoupage I’m assuming that would work

@stephanidebruin691 3 ай бұрын

Thank you for sharing

@paulinebrodeur1904 3 ай бұрын

I would like to know where you get your long foam tubes for the vases

@agould105 3 ай бұрын

They are called pool noodles and they come from the Dollar Tree, a discount store in the US

@tisenhow 3 ай бұрын

I would try freeform cutouts with UV resin for these skins!

@agould105 3 ай бұрын

That’s not a bad idea. At the time when I was making the skin jewelry I had not started with UV resin. Now you’ve got me interested in trying it!

@user-ke3zp6bm1l 3 ай бұрын

Oh gosh, im glad i found your channel. You are so refreshing. .the clarity of your voice, the softness & sliwness of your presentation is so wonderful. Thank you from a 75 year old who is hard of hearing.🎉❤🎉❤

@agould105 3 ай бұрын

Thank YOU so much!

@bhagyn3236 3 ай бұрын

Wow nice! Have you ever tried to put the washi tape into epoxy resin jewlry mould or use UV resin?

@agould105 3 ай бұрын

I’ve not used moulds with tape. I have used UV resin on Washi tape I’ve put on a wooden piece. This effect is quite lovely but difficult for me to achieve.

@recreepy 3 ай бұрын

This KZfaq video is a true blessing, turning my screen into a source of visual delight.

@agould105 3 ай бұрын

Thank you so much. I hope you’ll go out and get a sketchbook and start painting. It’s all about having fun and not creating something.

@KimScrapper 3 ай бұрын

Love this idea, great to incorporate supplies we may have from other crafty addictions...l

@KimScrapper 3 ай бұрын

Thanks for the great tips and tutorial

@agould105 3 ай бұрын

Happy to help!

@larrypelfrey5103 4 ай бұрын

That is so beautiful

@bostonbutterfly4473 4 ай бұрын

Thanks for the video, lol about the 20…if you weren’t recording you know you’d hit 20 on the first try haha. Beautiful piece btw 🤍. What difference do you see if it’s diluted?

@agould105 4 ай бұрын

I like to save money. I find that when I dilute the varnish not only does the original bottle of varnish go longer, but it doesn’t appear as thick. I kind of like doing the different layers of the 50-50 split.

@bostonbutterfly4473 4 ай бұрын

@@agould105 sounds like a plan to me. I’m going to take your advice, thanks so much! 🙂

@debinca3007 4 ай бұрын

I really like how that last ring of white worked with the turquoise

@ellynpelikan8792 5 ай бұрын

Glad to know I’m not the only one that messes up the resin!! Thanks for an honest video

@agould105 5 ай бұрын

You are very welcome. As a watcher of other KZfaq artists I love it when they make a mistake and then show you how to fix it so I wanted to incorporate that in my videos as well.

@laurienye7514 5 ай бұрын

SO, pretty and lots of great colors. Lots of awesome idea's for doing this type of art.

@agould105 5 ай бұрын

Thank you so much!

@jmt9000-k4k 5 ай бұрын

Thanks for this v ‘real’ video - v helpful 😊👍

@agould105 5 ай бұрын

Glad you liked it!

@Angel_Hearted50 7 ай бұрын

That is wasting your material. You actually can angle your scissors and cut around the piece.

@agould105 7 ай бұрын

That’s true you could angle scissors. But cutting a small square then getting to the edge worked well for me.

@BeverlyMandell-rz7id 7 ай бұрын

Love the video! Could I use this on alcohol ink covered ceramic coasters? If so, would I first varnish so ink would not run and The UV protectant so no fading and then this product? TYIA

@agould105 7 ай бұрын

I’m not sure. I’ve used regular clear glossy spray on alcohol ink and it does run. Perhaps you could experiment and report back?

@karenavery3672 7 ай бұрын

This is a very good video. Exactly what I was looking for.

@agould105 7 ай бұрын

Glad it was helpful!

@charlotte1704 7 ай бұрын

It does, however, say on the bottle, not to mix it with water 😕 I have a small bottle of it, along with a big bottle of gloss varnish, and that’s what I observed when I read through the instructions on the gloss one before applying it as the finishing touch on the canvas.

@agould105 7 ай бұрын

You’re right. On the bottle it says don’t dilute it. However I’m very pleased with my results after varnishing several coats with it mixed 50/50 with water.

@cherylhanney2434 8 ай бұрын

Lots of good tips! Thanks so much! ❤

@lindagatchell8079 8 ай бұрын

Do you sell more jewelry sets with your skins or separate pieces? TIA

@agould105 8 ай бұрын

Usually earrings alone sell better. Sometimes I’ll offer a special price on a pendant set rather than simply adding the cost of selling earrings or a pendant individually. For example if the earrings are $15 and then pendant is $10 and a buyer wants both, I have offered $20 for the set.

@user-pp4wb6ub2o 10 ай бұрын

Hi, thank you for this video. I like how you do full on safety measures, so many don't. I also like the fact you did both front and back instead of just painting the back or leaving it as is. I do not use resin as outside is windy most days and brings sand with it, my garage lets everything in, lol! I do use other safe shiny sealants and they are also safe for my medical furbies since their smell is so sensitive. I do a lot of wire work jewelry and like to make special boxes to gift them in. I also use other items to make jewelry including wood. I like your style and will be looking forward to new items you make. Have a great week.

@agould105 10 ай бұрын

Thank you! It’s always best to use every safety procedure possible. UV resin is different from two-part epoxy resin but still you need to use safety measures.

@tammymchale8635 11 ай бұрын

Your tiles are stunning! Gonna try this! Hate resin!

@agould105 11 ай бұрын

Hope it works for you!

@RainDropps 11 ай бұрын

Best to use resin for a smooth glass coat.. There are dimples throughout the tiles from spraying the engine spray. I used to use engine spray to coat my alcohol inked tiles and they had the same dimple effect.

@agould105 11 ай бұрын

I’m not a fan of using Epoxy resin. I have health issues and small animals in my house and did not want to jeopardize their safety. Epoxy takes a lot of extra equipment in order to use it safely and I’m not in a situation to do that. I find the engine spray does not leave dimples and it seems fairly safe to use in a well ventilated area.

@valeriehutzell1166 11 ай бұрын

Very good tutorial. Awesome designs!

@agould105 11 ай бұрын

Thank you!

@RainDropps 11 ай бұрын

No need to bake the tile? Leaving outside in the sun to dry uncovered will have dust n such, I’m amazed yours didn’t? With your design hard to tell I guess?

@agould105 11 ай бұрын

I didn’t have any issues with dust or bugs. I know I can order picnic plate covers to use if needs be.

@TanKatLuvr1965 11 ай бұрын

Anne, I have a designated paint brush for applying my glue/mod podge and then clean it with alcohol. You can disperse the glue evenly to the sides and get a very even coat. I also have a designated brush for my resin and I just store that in aluminum foil. Your videos are concise and to the point and you explain everything thoroughly. Thank you for not having music in the background. I find those videos hard to watch. ❤Rebecca M

@agould105 11 ай бұрын

Thank you for saying so and what great ideas. Yes I have issues with music on videos. Some artists I like the music is relaxing other times it’s very distracting. I have made videos with music before, but I chose not to do it for these two.

@diannameyers8163 Жыл бұрын

Love the colors, warm for fall , cool for winter😅🎉❤

@agould105 Жыл бұрын

Thank you

@diannameyers8163 Жыл бұрын

Could you use nail polish the same way?😂❤🎉

@agould105 Жыл бұрын

Do you mean swirl colored nail polish and create skins? I don’t know. Acrylic paint is basically colored glue. I’m not sure if nail polish would dry with the density needed.

@cherylhanney2434 8 ай бұрын

Small little puddles? Worth a try. Probably depends on the brand, etc. I use Pure. Even says vegan! 😅 seems to self level each record! Ima try a lil puddle! ❤

@cherylhanney2434 8 ай бұрын

Recoat

@SandyKirkRandyBruce Жыл бұрын

Is that a pool noodles inside to keep it straight? I'm really having trouble keeping mine straight and I'm getting poor results. Thank you for your videos.😘😘😘😘😘😘😘😘

@agould105 Жыл бұрын

Yes. The machine came with some thing that was like a pool noodle. I make sure when I put the vase on the arm that something is inside the vase, holding it very firmly.

@SandyKirkRandyBruce Жыл бұрын

@agould105 Thank you so much. Thank you a million million million million gazillion times. Kisses kisses kisses kisses kisses kisses kisses kisses kisses kisses kisses kisses kisses!!!!!!!!

@writeyarn Жыл бұрын

Just what I needed. Thanks!

@agould105 Жыл бұрын

Glad I could help!

@gloriagarrisonsuddath6421 Жыл бұрын

How do you mix your paint? And what do you use?

@agould105 Жыл бұрын

To make skins, you can use any paint, any acrylic paint, including apple barrel, and Craftsmart. Not my choice in painting on canvas, but because skins go under cabochon, it doesn’t really matter. I use the same recipe for everything one part paint to two parts, American floetrol, and a little bit of water.

@cherylhanney2434 8 ай бұрын

So many ways to mix! I started with Elmer's glue and water! 😅

@martineschumer7967 Жыл бұрын

Love it 🥰

@agould105 Жыл бұрын

Thank you.

@donnaboucher684 Жыл бұрын

hi can I use deco art paint.ty

@agould105 Жыл бұрын

Yes you can. For the jewelry. For painting I’d recommend you use tube paint.

@cherylhanney2434 8 ай бұрын

I use my paint samples for work. Even real houseplant! Prefer the stains and glosses. Use Elmer's white to thicken or water to thin depending on the flow. Tunes need floetrol, imo. But experimenting is they key to your art! ❤❤❤

@cherylhanney2434 8 ай бұрын

Tubes. The thicker the more thinner u need. Various recipes.

@donnaboucher684 Жыл бұрын

this is the first time I see ur channel.very good info.i didnt know you could pour paint with out flotrol or something else in it. ty❤😊

@agould105 Жыл бұрын

Thank you very much. Yes, it’s all a big experiment. Depending on the brand of paint you can choose to use just water alone!

@lauragelbuda3305 Жыл бұрын

Thank you!!! I had been doing pours for a while.l and then had about a year set back but I'm back and ready to let myself create again! This was helpful because usually I use Mica powder a lot and/ or got a little overconfident and decided not to measure anymore. I just started eyeballing it and using a stick to make sure the consistency was right. Well that DIDN'T work! This was very helpful in me getting back into creating thank you!!

@agould105 Жыл бұрын

I’m glad this is going to help you. I’ll be honest with you. I tend to do a lot of eyeballing as well. And I too have been away from Painting for many months. I hope to come back to it as the days warm up. It’s too cold to be in an unheated basement for longer than a few minutes.

@nataliesmith9434 Жыл бұрын

Looking on line and cannot find these where the squares are open. They are all translucent but covered. Where do you find these for the hanging panels with open squares?

@agould105 Жыл бұрын

I found the light panels at Lowe’s Hardware store. They fit on the top of fluorescent lights.

@Truustfv Жыл бұрын

Thank you!!! I have been looking at so many heat resistant products to try for coasters and trivets. I already had this product in my Amazon cart, but was still unsure. So I decided to see if I could find any real artist reviews. I saw your video on the Clear Coat first. I was so disappointed when it didn’t work. Then I watched this one. I’m so glad I did! Thank you again.

@agould105 Жыл бұрын

I’m glad it helped. The coasters that I made for this video are still sticky free. I’ve never had a problem with them. The issue I have is how to heat cure them when it’s not 95° outside.

@inablink123 Жыл бұрын

I love this. Thanks

@agould105 Жыл бұрын

So glad! Hope it helps

@specialk8927 Жыл бұрын

I agree the wax paper made the skin wrinkled and it was hard to get off the wax paper! I bought those pink sticks from Amazon thanks to Mr Macdonald on KZfaq but I didn’t know they were dental sticks😅

@specialk8927 Жыл бұрын

Won’t the paint run into the other paint section? Wow two weeks is along time I try to make them thin layers which might take 2-3 days I hate waiting!!!😂

@agould105 Жыл бұрын

I hate waiting too but I’d like to be sure all layers are dried and cured. Yes sometimes they do run together but once they’re dry you can cut the skins apart with scissors

@christines.4444 Жыл бұрын

Love your video!!!

@agould105 Жыл бұрын

Thank you!!

@royalecrafts6252 Жыл бұрын

I do 20% water for matte and satin, you can tone it up 25% for gloss or 30% MAX, 50/50 is just too much, great video nonetheless

@agould105 Жыл бұрын

Thank you. That’s a great idea. Perhaps the lower proportion of water would make it need less coats. That’s definitely worth a try.

@royalecrafts6252 Жыл бұрын

Less coats and you keep the varnish chemical consistency a lot more

Ең жақсы KZfaq

Пікірлер