Wich one would you recomend to buid for a begginner, this one or a tamiya grasshopper or the frog?
@Granite-City-RC4 күн бұрын
The tamiya would be a less frustrating build then this one. Tamiya have better instructions and less confusing to build if your not use to kits. If you want the Absima i'd just buy the RTR one then maybe change the motor for a brushless one
@VetteWay2FastАй бұрын
I’m honestly shocked a 500 dollar hobby grade rc doesn’t have channel reversing. Pretty standard on most car, truck, plane, heli rc’s.
@Granite-City-RCАй бұрын
its set up like a real excavator so i guess they thought people would be fine with how it works ?
@VetteWay2FastАй бұрын
Nice, good to know how to access the inner circuit board. Wanting to switch the boom wires so it lowers with down input on controller.
@Granite-City-RCАй бұрын
just make sure you swap the right ones lol
@VetteWay2FastАй бұрын
The boom motor ones are fairly straightforward, it’s the green plug. Works great and now reversed but need to figure out which wires are the limiter cutoffs so they work with the motor direction being reversed. No diagrams online unfortunately
@jclaliga1130Ай бұрын
I'm currently building this as a first build and it's hot garbage. Same missing screws, horrendous instructions. Thanks for the videos, though, I needed to know that it wasn't just me!
@Granite-City-RCАй бұрын
LOL it is a pain to build, i think by the end of the build videos i say don't bother getting the kit , just buy the RTR and swap out the motor and servo. i mean if somone gave me to option to eith build it again or take a drill to the head, pass me the drill i'll do it myself. I built a TRX4 sport a little while back and that was such a joy to build. Even tamiya are are great to build, i mean, they aren't great cars , and its hard finding where the screws are in the 20 packs or random hardware they give you, but you can build it without wanting to to pull you eyes out lol
@jgminiaturas83192 ай бұрын
Brasil 🚛👍
@vitororsatti55523 ай бұрын
Hello friend, how are you? I like your videos, I'm already subscribed to the channel. I have a Huina 583 wheel loader and I would like your opinion and guidance on upgrading it to make it better... engine, faster steering, proportional acceleration, etc. Could you help me with the purchase links or what should I buy? Thank you so much for seeing you Thank you, hug
@Granite-City-RC3 ай бұрын
there are 2 websites to look at for upgrades : magomhrc.com/en/ and wuehlbox.com/shop/en/ . I got a lot of parts from them and they normally work well
@vitororsatti55523 ай бұрын
Thanks man
@vitororsatti55522 ай бұрын
@@Granite-City-RC Good morning my friend I would like to know if there is a difference in the Huina 583 loader between the V3 and V4 models and how to differentiate this when purchasing
@vitororsatti55522 ай бұрын
Good morning my friend I would like to know if there is a difference in the Huina 583 loader between the V3 and V4 models and how to differentiate this when purchasing? Thanks
@Granite-City-RC2 ай бұрын
@@vitororsatti5552 the will look exactly the same on the outside. I can only guess the most will be V4 now as this was a couple years back when i madethe video. But if it does not have proportional controls then it's V3. If it has proportional steering / acceleration then it is V4 . I don't know if it says on the box which version it is , but worth looking just in case .
@jgminiaturas83193 ай бұрын
Brasil 🚜🚛👍
@jgminiaturas83193 ай бұрын
Brasil 🚜🚛👍👍
@yuk-hongtse51973 ай бұрын
Good job 🎉
@parlindungansilitongakobar79204 ай бұрын
👎👎👎👎👎
@bobbyspenser73044 ай бұрын
Great build my friend
@carltonslaine77565 ай бұрын
very interesting big massive thanks sorry to hear about what happened to your loader that's why i keep kids away from my huina excavator 1594 .. because things like this can happen lovely video
@Granite-City-RC5 ай бұрын
Thanks :) I'm no expert when i come to RC's which is why i take the time to do on screen invetigations, they might save some people time if they have the same issues. When doing demonstratins and interacting with the public you have to expect somethings going to go wrong lol. The 5 FTX kanyons the group has for the public to use ( for donations to charity ) normally come back with a lot of broken parts ;)
@wordreet5 ай бұрын
Great fun to paint a fantasy bodyshell!
@wordreet5 ай бұрын
@@Granite-City-RC Obviously you need to crash it down some rocks etc!!! Oh, and just as a by the way, Range Rovers have an aluminium body. 😉
@piero_tamy_rc5 ай бұрын
Top bro
@user-vb3ke5zc3m6 ай бұрын
Hey I just started modding my huina, I want to do this but can’t find a good link to order the parts.😕
@treymclean97996 ай бұрын
How much for you to paint mine
@Granite-City-RC6 ай бұрын
LOL, 1 miiiiilion dollars ;)
@chriscumming85296 ай бұрын
nice job an mods too ur loader best i have seen so far..
@islandrc-duke19727 ай бұрын
great video and work on the electronics
@Dara-xu1wp7 ай бұрын
Good job friend😍
@RCrawlerLeon7 ай бұрын
excelent model when you buy this kit ?
@Granite-City-RC7 ай бұрын
Always try a local hobby shop where you live first. I found it on offer from here : www.applianceelectronics.co.uk/viewproduct/14798/trx-4-sport-assembly-kit-4wd-no-electronics-trx82010-4 , but they are a UK shop so dont know where they will deliver to. ** lol only just noticed you said "when" i got this at christmas**
@RCrawlerLeon7 ай бұрын
@@Granite-City-RC jajaja yes i have a error write, but your anwser is good. I don speak english, From Mexico. Tanks but address shop page
@Granite-City-RC7 ай бұрын
@@RCrawlerLeon prueba esta tienda en américa : www.amainhobbies.com/search?s=Traxxas%20TRX-4&fk=26_183&lg=fk26 , No conozco ninguna otra tienda que esté cerca de ti. traductor de google jajaja :)
@islandrc-duke19727 ай бұрын
great video and work on the transmission
@Granite-City-RC7 ай бұрын
Thanks buddy :)
@John-nx6ue7 ай бұрын
Mine broke In was grading with a big bucket :(
@John-nx6ue7 ай бұрын
@@Granite-City-RC yeah m2 I just modified my huina 1593. Im a new at rc so was very happy I succeeded. Than I was having fun in my dads garage loading dump trucks and grading sand... bucket broke. i have one more week holiday so I planned to have fun with them but guess not lol. But anyway it nice things break for me I forces me to become a bit more handy with rc. Luckily my dad know rc quit well so if I mess something up he can help. But just replacing a servo shouldnt be a problem i mean more like If i ever gonna do more complicated mods or builds Rc is fun but its not cheap :(
@John-nx6ue7 ай бұрын
Btw i just did the dump mod on the 1583. I made the linkage from 50 mm to 60 mm Then it broke I used a large bucket. Is it to much for thi fellah?
@Granite-City-RC7 ай бұрын
@@John-nx6ue is always good to learn how to fix things lol. I like building kits so i know how to take it apart and fix it if needed. Its also why some of my videos take a while, i'm figureing out what i'm doing as im doing it lol I used my 580 and 583 to dig my garden pond, was fun but took ages to do ( videos are on my channel about 2 years back )
@Granite-City-RC7 ай бұрын
@@John-nx6ue yeah i'm still on the stock bucket. did you make ur own extension ? i bought mine .
@John-nx6ue7 ай бұрын
@@Granite-City-RC i made it meself
@kleinduimpje87 ай бұрын
Go Magom from Spain
@Granite-City-RC7 ай бұрын
Hello Spain lol
@1tonysgarage7 ай бұрын
Do you have a video on the fast turn motor on the 583?
@Granite-City-RC7 ай бұрын
yes , from a while back: kzfaq.info/get/bejne/nJyUgNyB26jRmIk.html
@1tonysgarage7 ай бұрын
@@Granite-City-RC thanks so did u have to grind some off the plastic for the wires not to rub. Thanks for your videos. I have a few also
@Granite-City-RC7 ай бұрын
@@1tonysgarage no i didn't need to grind bits for the wires i just trimed where the top screws in to get the magnets and screws at the right height
@Tok_Karo7 ай бұрын
Lokasi Terbaik..
@islandrc-duke19727 ай бұрын
cool upload and build so far
@Kacper782418 ай бұрын
Oooo new rc😊
@Granite-City-RC8 ай бұрын
yeah, got that at the start of the month and though i'd get it built for Xmas :) got another on for Xmas just starting to build that :)
@islandrc-duke19728 ай бұрын
great build so far brother
@alexandervargas94888 ай бұрын
Hola esta super bueno que escala es saludos
@carlbModels8 ай бұрын
Hi, great vid! What size are the hexes?
@Granite-City-RC8 ай бұрын
Its the standard size that come with the huina loader, not 100% sure , but wanna say about 5-6mm if i remember right
@kevinacaron8 ай бұрын
What size are the allen bolts that hold the arm together? I have a broken flange on mine and I need to split it to weld the new flange on.
@rcconstructionbr8 ай бұрын
Top! Hello my friend, grateful for sharing your improvements.
@Granite-City-RC8 ай бұрын
No problem :) i thought it would be handy for people
@richarddoney13248 ай бұрын
Get some snow chains
@rcplaytime8 ай бұрын
nice work 👌 excellent control of the excavator dude 👍👍😀😀
@islandrc-duke19728 ай бұрын
cool video and awesome rc's
@servetkurtulgan36199 ай бұрын
Hello. How can I buy this rc construction machine? can you send me a link
@Granite-City-RC9 ай бұрын
First try a local hobby shop. You might be able to fine it on banggood or aliexpress. I bought mine from www.modelsport.co.uk/
@servetkurtulgan36198 ай бұрын
@@Granite-City-RC Thank you. Do you have a social media address where I can reach you? I have other questions to ask. The scoops on this site are not like the ones in the video.
@Granite-City-RC8 ай бұрын
@@servetkurtulgan3619 i only do youtube, so no other social media. As far as i know the V4 has the bucket like mine in the video, V3 has a slightly different bucket.
@servetkurtulgan36198 ай бұрын
@@Granite-City-RC I understand. What I want to ask you is, where can I buy motorized pistons that provide excavator movements? Pistons that enable the excavator's head to open or the arm to move up and down
@Granite-City-RC8 ай бұрын
@@servetkurtulgan3619 try looking for rc spindle drive on banggood or aliexpress would be my guess, should be able to find electric motor ones , or hydraulic cylinders and pumps for rc's
Will a stock loader work with those batteries or will it fry my board 🤔
@Granite-City-RC9 ай бұрын
it should be fine. The stock batteries are a 2s lipo, and these are 2s lipo's just with a bigger charge
@PaverSavers8139 ай бұрын
Do u hv link to product for upgrade?
@Granite-City-RC9 ай бұрын
www.aliexpress.com/item/1005005765057290.html?spm=a2g0o.order_list.order_list_main.5.21ef1802KUvLod is where i got mine from , but have a look round aliexpress for either 1573 or 1583 parts you should find it :)
@islandrc-duke19729 ай бұрын
cool battery connector mod and can't wait to see how the rest turns out,have a great weekend
@robertwashington40089 ай бұрын
Is that a 7.4 v battery
@Granite-City-RC9 ай бұрын
kzfaq.info/get/bejne/h5mgmMh3vMzckYU.html
@lennyjei80610 ай бұрын
Thanks for the info! Right now I'm changing aall the electric stuff in my 583/Amewi G485E, including the transmitter and receiver. 😅
@lexsteel123 ай бұрын
If I may ask. What electronics are you using to replace in the 583? What would I need to replace the electronics in my 583? I understand it is a little more complicated than simply swapping ESC's?
@zoridor1610 ай бұрын
Amazing and rare Vehicle❤ Ugh I loved this model! Why is it currently more difficult to get a Kyosho vehicle and its spare parts compared to Tamiya? greetings
@rc-diy786410 ай бұрын
Hello, good job friend 😍👏
@bubbadog914510 ай бұрын
Thanks for posting… great seeing some footage of my quad rider eddie 😎
@Granite-City-RC10 ай бұрын
no problem mate , it is a funny odd cool thing to see running about the place
@doubleh9743910 ай бұрын
Bjr cets quel type de batterie vous avez mis et estce que que c bien en 7,4 volt ou plus de celle de la batterie d'origine merci a vous