What happens when the fabric is caught between the fabric at the factory and shipped in this manner. And then I mount it and open it up and there are holes worn threw from the fabric rubbing on the rivets in the frame? Is Ikamper going to remedy the issue? You can't inspect the awning upon delivery until you are able to mount it. Unfortunately because of family illnesses, I was not able to mount it for quite some time. It doesn't change the fact it was packed incorrectly at the factory. I will be contacting Ikamper customer service when I return from this trip. The awning is very nice and easy to open up and take down, it is just disappointing to open it up for the first time and find 3 holes in a $1,800 awning?

Leaving an open tent to the elements is a crazy design... Have you heard of wind... Omg this is a very poorly design to leave it standing. Please design a closure for it. To sell us 😂

Hello, does it work with Subaru Outback properly? I mean, if Subaru is high enough from the ground. I have Skykamp 3.0. Thank you.

What happened to these Tuesday Tech tips....?

Can the rooftop tent still open with the awning out? The tent box tilts out so is there enough room with the awning box there or do you need to shift the tent to the right on the roofbars to make room?

Will work with the 1.0

If I was a toddler this would be the perfect setup.

N!!0pp M mmm

Good for when you need a basecamp and do not plan to move your rig. Especially if you have a larger family or group of friends. Definitely not for everyone and I do not bring it with me when overlanding. If overlanding the attachable awning works better.

What car is rhat

사고싶다😊

This thing is a nightmare to fold back up to place it in its original bag.

I just installed a Skycamp 3.0 on a Sherpa Crestone rack and that thing rattling bad.

What size rivets?

What lift/tires do you have on that tacoma?

Looks really nice just the price is not. Where is the discount code for it?????

Tip: Show completed setup in first few seconds then show setup. Saves allot of time for viewer.

5 minute to open set on the rain ? Too long.

Gostei bastante. Voces entrega no Brasil?

I bought into the hype and got one. Too tedious to set up and break down. Okay for base camp if you don’t need your vehicle to explore. If you do detach and return expect to readjust everything. It will not line up. Pain in the arse. Not for overlanding. Also you need the tent set up high like in a lifted 4x4 as shown. If you have a low profile mount on the bbed the annex does not fit right. You need to extend the poles very wide making the annex lean and not line up right. Waste of money. Get the attachable awning for extended shade and I got a gazelle gazebo.

Dear lord, kill the music track.

Having attempted it yesterday we really need a tutorial on the Exoshell side walls - too much guesswork involved with just the label pictures 🤓🙏

Kann das auch ohne dem Tisch betrieben werden?

It does not have any mesh? So when the windows are open and the frontdoor bugs can easily go in?

Pretty interesting but my knees says “nope!”

I love ikamper i just which they have more colors to suite the hot weather

What happens if you mount the tent mid or low height on your struck bed, does that mess with the annex?

Can you leave both insulation tent and two sleeping bags in the X-cover 2.0?

How the heck do I get it back into the bag 🤨😡

Fyi. I have this tent. The design is prone to torn seams on the tent pole sleeves for the side windows. There needs to be more durable material. You will poke your tent pole and burst through the seams. And zero support

I have a major issue with the iKamper install. I have received the iKamper X-Cover and I have a 2023 Toyota Tundra crewmax limited. I have a mid height rack bed rack system with 4 top load bars. The mounting brackets that came with the iKamper are not so universal. Since I have a mid-height bed rack, I do not have access to the front of the iKamper to use that long hex tool to tighten up the bracket. I can tighten up the rear iKamper brackets but I can’t access the bolt for the front brackets. The bolt is facing the rear but the long tool, design of the bracket, and nut location doesn’t allow the use of your tool. I was able to use my little hex wrench but since the bolt is inside the channel, it took me an hour to tighten both bolts because can only turn about ¼ turn each time. I can’t also really tighten that good. Any advice? What worries me more is that I can't talk to a live person for support. I finally found iKamper number on another website 206-274-8337 but the automated system just tells me to use email.

After seeing how this is assembled, your margins are insane

Question what happens when he returns to the tent? How easy is it to get all lined up again?

Прошло 3 часа

What kind of Roof Rack is that and Molly Panels on the side ?

So.. after its setup you cook sitting on the ground?

Can an adult fit into the tent with cot?

I didn’t see that ladder lock…..

On the xcover do you still need to move the front half of mattress before you fold it up?

Wanted to buy but ran into two issues. Mini is kinda small even for a mini, 50.5” I think. Mattress is a joke for what the unit costs. I shouldn’t have to pay for add-on products for the most fundamental aspects of the tent. As a side sleeper I was warned off of iKamper without upgraded mattress. Finally, make an intermediate size imho for 6 foot beds! That would have maybe pushed me over the edge. I ended up getting a Roam Vagabond with the vestibule, weather liner, lighting system, camp mat, mattress sheet for ~$1000 less than the iKamper Mini. Will miss the super fast setup but that’s probably it.

Maybe superb product. But a shame that Ikamper needs to upgrade the matress after delivery of its' roof top tent with stock matress, for the matress quality they should have a look @ vickywood Mighty Oak or Eezi Awn Sword hardshell tent. I don't want the hassle anymore of inflating/deflating matress, their lifespan is too short by the way! Come on Ikamper...

Do all ikamper skykamp 3.0 come with the newly designed 3.0 mounting brackets?

Thanks for the video. Where can i purchase the replacement cover? Mine is already faded after 2 brutal AZ summer here

That’s insane!! I was excited to see what this was about but it looks like a very tedious setup and breakdown . The modern pop up tent matched with an old classic 8hr assembly.

Hello i camper very nice video. Actually i want to buy an ikamper 3.0 with its annex plus, and i have a mercedes sprinter with a high roof (285cm car high from the ground) will this annex fit or its going to be a bit high from the ground especially when im going to add some roof rack to hold the tent wich going to add some extra 10 centimetres in the total high of the tent from the ground. So to conclude will this annex support 295cm in high from the ground or its going to be lifted off the ground (are the pin rings going to be lifted off the ground ). Looking forward to hear from you and thanks again for your turorial videos.

Hello i camper very nice video. Actually i want to buy an ikamper 3.0 with its annex plus, and i have a mercedes sprinter with a high roof (285cm car high from the ground) will this annex fit or its going to be a bit high from the ground especially when im going to add some roof rack to hold the tent wich going to add some extra 10 centimetres in the total high of the tent from the ground. So to conclude will this annex support 295cm in high from the ground or its going to be lifted off the ground (are the pin rings going to be lifted off the ground ). Looking forward to hear from you and thanks again for your turorial videos. 1:49

Hi! Just want to ask if i can wash the linear before storing it for summer..thanks!

Music and demonstration both better at 1.75 IMO. Enjoy!