Does it perform well in game? Is there any performance difference between wood and plastic wood?
@TobiMorrisonStudiosАй бұрын
Is this gun ok to dry fire?
@zamabdurajak46822 ай бұрын
gas version or spring?
@khemib2 ай бұрын
He said spring
@zamabdurajak46822 ай бұрын
@@khemib thanks
@rotinpiss70476 ай бұрын
Is this compatible with the Arcturus ak-12
@keltongaming54847 ай бұрын
There’s now 3d printing files for the shells and stripper clips available for free, all you’d have to buy is 6mm o rings. A 500 pack is $5 USD so pretty cheap. There are also shell catchers you can buy or 3d print that are specifically made for these, so they are now more of an option for skirmishing, but I’d still rather use an aeg or gbbr for competitiveness
@pberezan38306 ай бұрын
In my experience the printed shells dont hold up, their rims end up breaking and they get jammed in the chamber.
@keltongaming54846 ай бұрын
@@pberezan3830 I see, I’ll experiment with them, but I wanna try them out first before I spent $50 bucks on ten more of then
@adamastro1008 ай бұрын
my also came with that hole cuz the bolt couldnt fit but it works prefectly
@burningheartphotography97529 ай бұрын
Just been gifted one of these I know it's an old review but awesome to see cheers shags 🙌
@marksmana1p10 ай бұрын
too dark video
@filippoarceci195410 ай бұрын
Thank you, only worthy review i saw for this model, the rest is just unboxing or videos with no valuable info whatsoever
@TheTimbs_11 ай бұрын
How to remove the ebb? It takes up space and can screw up the hop up and battery.
@chrislagunas200011 ай бұрын
Sadly, this kinda has a compatibility issue with my Cyma Ak74, but zip ties work on it and attach to the gas block. Well, it just doesn't slide back all the way
@autisticduck725311 ай бұрын
How do you take the muzzle off
@mircea_0064 Жыл бұрын
S-sigur FA-foc automat FF-foc cu foc
@tk-5764 Жыл бұрын
Do we know if the casting of the TM ZET AKM will work with it?
@zimmmerit6308 Жыл бұрын
Can you help? I bought E&l AK and Double Bell launcher and it not fits fully (( the launcher goes off without clicking off button
@idontknowyou876 Жыл бұрын
Is is fairly easy to push bolt in?
@RadioactiveSaddam Жыл бұрын
Very nice review! Goid work. One of the goid things about the folding stock is that it doesn't interfear with the optics rail like on a AKS74U. It folds to the right side. 👍
@cornishpasty7853 Жыл бұрын
does anyone else have a problem with it falling off at the handguard? is this because I'm missing the rod that goes under the barrel? also is there a way to stop the BBs from falling out of the grenade when its angled downwards?
@cornishpasty7853 Жыл бұрын
@Tolam some people I asked said it was the same on the real one, however I am getting a new AK soon with a smaller lower handguard which might fix the problem
@cornishpasty7853 Жыл бұрын
@Tolam I just figured it out: when you feel it click on it not actually on all the way. You have to push down really hard from the barrel and it will move slightly. Then it shouldn't move.
@loganriddle8520 Жыл бұрын
What ak do you use?
@cornishpasty7853 Жыл бұрын
@@loganriddle8520 I was using a JG ak74 and it just needed a hard push to fix the problem for an hour or two. I've since switched to using a special arms j01 edge 2.0 and it's a lot better and doesn't come off at all.
@MaLva500 Жыл бұрын
I've noticed the spring inside the grenade is far too stiff to fire when it has green gas inside. Anytime I've looked for a fix nothing is available as a guide
@Silver55 Жыл бұрын
hey man u got any clue if it will fit a ARCTURUS Ak12k?
@rotinpiss70476 ай бұрын
Did u find out?
@Silver556 ай бұрын
@@rotinpiss7047 yeah i did u it dose fit but u gotta take off the flash hider, U can still put the flash hider on after but it would be lose on the threadS
@LynchE1 Жыл бұрын
Could you use taginn rounds ?
@conqueeftador1378 Жыл бұрын
Can this run an 11.1
@RenegadeQuack Жыл бұрын
A little stripper tip, lift up the front of the last round (the closest to your hand) with your index finger, and push down with your thumb. This way you negate the tention from pushing down on rounds that are not a compleat cylinder. 😊
@THECHRISTRAIN Жыл бұрын
Great review! I've been on the fence about it, but now I plan on getting one! Looks great on your AK!
@edkillick44502 жыл бұрын
Does this fit dboyz ak?
@nervigeskind31312 жыл бұрын
does it have a full travel bolt?
@jk_actual2 жыл бұрын
Just ordered one for my first Airsoft rifle! Hyped.
@MBKill3rCat2 жыл бұрын
The shiny steel cases are disgusting
@khemib2 ай бұрын
You can probably repaint them to look like brass
@cavscout71132 жыл бұрын
Just bought the gelblaster version here in Oz - thanks for the vid showing how to fit it and load it as it came with no instructions or manual whatsoever.
@skeidivend3532 жыл бұрын
the hole in the stock is there for the reason that you need to push the firing pin against a spring, you can put the firing pin in the hole and push it, and not to risk damaging it.
@nickgautrey26162 жыл бұрын
A quick note the grenade is held in with a small latch inside not magnets.
@grimreaperairsoft14862 жыл бұрын
Would this fit on a Aks-74u? I'm thinking about buying one and was curious
@sergeantsalad18832 жыл бұрын
Since the aku has a different hand guard and no rod on the bottom of the barrel it is not possible to fit a gp-25 on it, sorry
@Tower.. Жыл бұрын
If you attatch it on the handguard with ducttape... then yeah.
@mudy74712 жыл бұрын
Wonderfull review, i ordered it for my LCT ak74n and i also think it just looks so dope on an ak.
@omegameme29382 жыл бұрын
Is it ok for out doors game play and how big should the battery be? Because I have two 11.1 lipo 15c
@russianchef35712 жыл бұрын
Is there someplace where I can get a part diagram
@parallel-knight2 жыл бұрын
YO does anyone know if the K-55A version they do is able to separate from the bit of pic rail it comes with?
@parallel-knight2 жыл бұрын
Is anyone selling one if these in the UK. I’ve been looking to get one for months on end of someone would do me the honour and blessing of selling me one that would be amazing. If you want to sell it with the AK. I am looking for a AK-74 type ak so I would be interested in the package. I’m willing to spend £100 for launcher and £250 for GP-25 and AK-74 type.
@MrSv7dzg2 жыл бұрын
Just arrived it feels very heavy and bulky which is what I expected the good way, you don't feel like it will brake on your hand. The magazine that is included doesn't fit well I recommend getting new ones rather than using the included mag
@dirtyhoneybadger97832 жыл бұрын
Very good review. Thanks.
@user-rq6lx1ll9b2 жыл бұрын
30 минут болтавни ни о чем.
@HXMICIDE6762 жыл бұрын
Could I get a link to the website please
@dinomercury46412 жыл бұрын
Will the blowback mechanism break? I really like the gun and I want to buy an AK made from metal and wood with blowback action, so hopefully this one is the right one.
@F-14DSuperTomcat2 жыл бұрын
Could someone provide me with a link for a good battery to use with this gun?
@baconatoromg60622 жыл бұрын
Pretty much any 8.4v lipo or NIMH will work. Also you're my favorite aircraft if all time
@mixmixed.comics30022 жыл бұрын
Absolutely brilliant review. Keep up the great work.
@SanaOpie2 жыл бұрын
I actually shot the real deal , it sucks :)) , that folding stock is worthless , and after 100 bullets it hurts like a mf , wooden stock is way better , and more accurate
@KatMinty Жыл бұрын
Weak
@BenieBoom2 жыл бұрын
great review!
@GriffenSpadeIsBack2 жыл бұрын
i got the same one by same company but mine came with a scope and rail but no instructions on how to mount the rail onto the rifle.
@West_Coast_Mainline2 жыл бұрын
This is the best review yet
@Thesandboxsurvivor2 жыл бұрын
its not 5.45 x 39 bro look at the mag look at the curve its 7.62x39 and more like an akm
@Quert_Zuiopue2 жыл бұрын
Can i mount rs stocks to the stock mount like on the LCT?