Пікірлер
@chrisswallow2950 Күн бұрын
Can this be fitted to a sledge? 🤔
@Fishinmass17 Күн бұрын
What one would you use if you’re not running a belt setup and using a hobbywing max 6 or castle monster mamba 8s?
@kenyons737 3 күн бұрын
Where do I get those wheels and tires Need street tires for my XRT
@michaelnelson4773 9 күн бұрын
I had to add my E revo tires to my max to counter the weight cause of the power of converting it to 6s
@1923arjo 9 күн бұрын
I got 60 with mine.
@brandonlack4615 10 күн бұрын
Do you do arrma stuff
@harisjaved1379 11 күн бұрын
Hi man, what are those wheels I need them too!! Are they 17 or 24mm? Thank you
@justonjacoby4455 11 күн бұрын
Awesome quality of RX Box Chris great work man!! And of course your other parts aswell!! Keep up the hard word and dedication to RC man
@Hungrybird474 11 күн бұрын
That looks like a good ground pounder , jumping RC too ? 👍
@RcpsychoRen 12 күн бұрын
niiicccceeee!!!!!
@justindover8142 12 күн бұрын
That front axle starting to look a little wavy
@DadsRCGaragePNW 12 күн бұрын
Sick!! Where you find an empty Walmart lot to rip?! Lol I know it’s not a store. It looks like one.
@DadsRCGaragePNW 12 күн бұрын
Mount camer up another 2ft higher then tilt down. Then you don’t have to bend down to get in the frame. lol makes my back hurt watching you do that.
@BenjiiJackson 12 күн бұрын
@@DadsRCGaragePNW how he get the camera to do the follow angle from the front?
@DadsRCGaragePNW 12 күн бұрын
@@BenjiiJackson that’s mounting the selfie stick to the camera. Insta 360 go or any other one that delete the stick from the video will do that.
@BenjiiJackson 11 күн бұрын
@@DadsRCGaragePNW thanks for the info 💯💯
@teppanyakikingjboix8086 12 күн бұрын
Which one fits castle 1260 kv ?
@teppanyakikingjboix8086 12 күн бұрын
Which one fits castle 1260kv?
@jameswright5572 12 күн бұрын
Love mine, and the aftermarket folk wont have to worry about BS lawsuits from Redcat.
@davidgreen4286 13 күн бұрын
Just placed an order.....promo code didn't work
@pnwRCMADNESS 13 күн бұрын
Thank you, David. I refunded you back the 10%
@Django35555 13 күн бұрын
For racing/bashing an xmaxx it has your belt drive how low would you recommend the ride height to be?
@lavalle08great 13 күн бұрын
What’s the difference between the belt drive and the pinion gear
@harisjaved1379 13 күн бұрын
Thank you! But do you guys have motor and ecs mounts for the xrt? I want to run the 56811 motor with max5 g2 esc, with adjustable mesh. Thank you.
@pnwRCMADNESS 13 күн бұрын
@@harisjaved1379 Yes sir on my website pnw esc caddy
@harisjaved1379 13 күн бұрын
@@pnwRCMADNESS excellent! Thank you. I will order it. Also I saw the motor mount on your site, the motor mount will be ok with mod 1.5 correct? And since I will be using the 56118, the overhang will be ok correct? Or do you recommend I get something else for that larger overhang vs 5690?
@Chris-vl8em 14 күн бұрын
what is the best 20 / 30 or 25 / 20 for speed and heat the motor and esc
@brandonlack4615 17 күн бұрын
You didn't even show what happened dude how are we suppose to be surprised
@harisjaved1379 17 күн бұрын
The stock servo is very underpowered.
@harisjaved1379 18 күн бұрын
Hello! Will this work with hobbywing 56118 g2? I wanted to buy it but I was little confused.
@Stonew24 18 күн бұрын
Great bash. Love the setup. What fan mount is that for the 5690 motor? Thanks
@kalaifung8979 19 күн бұрын
Love the footage and show us around, happy adventure !
@easybucketz 19 күн бұрын
Hey which batteries did you use?Mah?
@ultramaga2398 22 күн бұрын
Can you tell me if the gpm 1.5 mod gear 33t/19p work well with a 5690 max6 motor? Also its beltless. Thank you
@geraldchilders2625 23 күн бұрын
So what do you think treal or gpm I believe there Bolth 7075 I like the look of treal but the gpm look beefy I did treal on my max and max slash very nice but I want to try gpm on sledge and want sledge chassis and motor mount
@RicardoHernandez-rt8gz 25 күн бұрын
How did you setup the existing brakes?? Having a hard time figuring it out 😅
@andrataylor6070 29 күн бұрын
Are u running the 23/46 to get 62mph?? Thanks
@fleeshawn11 Ай бұрын
No E-revo brushless 1.0 parts ?
@fleeshawn11 Ай бұрын
I want the Xrt so badly guess ill have to keep my eyes out on the next traxxas linited edition release
@tomarnold6550 Ай бұрын
Awesome video. That is the setup I plan on running on my XRT soon. Great bashing spot too!
@CRAIGMAC-RC Ай бұрын
Another awesome piece for the xrt! I love your products, I just absolutely put my xrt through some carnage at the skate park , I’d love to work with you
@chriseller757 Ай бұрын
Yea right. What a tard
@Johnny6ex Ай бұрын
But I like stock xrt tyres
@tallieWills-d7q Ай бұрын
Matter fact they should start adding a basher body included for little extra to not ruin your nice body , perhaps just a primed body to put on for bashing, cause it hurts you to mess up the body
@tallieWills-d7q Ай бұрын
Its crazy how you be wanting to get another body for every really nice body, because you don't want to mess it up, so you gone need a basher body ...
@andrataylor6070 Ай бұрын
Are the Louise Cyclone wheels taller than the Xrt wheels? I just purchased some for my Xrt...Thanks
@Diaszurana Ай бұрын
I just picked one up last weekend. I haven't had a chance to run it yet, but I can say that it looks so much better in person than it does on youtube.
@samb1818 Ай бұрын
Very nice sledge. Cant wait for the next video
@AllInRc1971 Ай бұрын
Chris, you are a dangerous man to me. I have 7 Xmaxxes and 5 XRTs. I have a few projects to tighten up. Once done, I''ll throw some paychecks at you.
@SOMNIOHM Ай бұрын
_About to find out how long a set of choppers last on the big rock 6s! Should be interesting!_
@chrisryder4709 Ай бұрын
I've been running them on my XRT , x max and VEKTA5 E 12s , I've blown a couple hubs , but I ordered a bunch of hubs , love my magmas
@maplestreetrc Ай бұрын
I was glad to see a backflip in there.
@geraldchilders2625 Ай бұрын
The slash shocks are little bit shorter I got them in hand side by side of truck
@T1Jafo Ай бұрын
Good video. Lots of good information. Would be interesting to see some before and after performance information other than weight; especially with the belt driven motor. Perhaps another video in the future showing replacing the screws on the JConcepts
@make4all2000 Ай бұрын
Nice wheels, but if you wait 6 months for preorder…no thanks
@pnwRCMADNESS Ай бұрын
They show up today and all pre orders are being shipped out. I have been testing them for Jconcepts for 6 months. They just released these to the public
@make4all2000 Ай бұрын
@@pnwRCMADNESS very nice man, Maybe Jconcepts have started to produce more seriously, I know that in the range for 1/5 you have been waiting a long time for the order to be delivered, thanks for the answer
@pnwRCMADNESS Ай бұрын
@make4all2000 oh yeah… The 1/5th has been out of stock, no presale. I put these on preorder only because they are arriving today or tomorrow. The 1/5th Magmas also are showing up. Finally 🤙🏼🤙🏼🙏🏼🙏🏼 But now the choppers are out of stock 😩 the 1/5th choppers. I think it’s just a lot of money and over seas stuff that takes long time. They are great people deeply rooted in the rc community also.
@brucebaker0316 Ай бұрын
Don't throw a spark.. Looks a bit dry..... there LoL Nice rig...!!
@DozersRCPlay-vf4pd Ай бұрын
Great stuff. Those tires look so mean but possibly too heavy. I will have to check back to your store when they are in stock to check out the details.