Thank you very much for the knowledge you have given me!
@Soddus.Күн бұрын
ive got 4 pcs already but nothing close to this size, my smallest pc is 12100f+1080ti in a nzxt h1, im so tempted to replicate this build
@britishfireworks2 күн бұрын
my mouse has non of these issues im guessing they fixed qc?
@K0MENTAT0R6 күн бұрын
HEY POKER, WHAT'S THE VERDICT ON THE VIDEO CARD AFTER 2 YEARS?
@PokerFaZe5 күн бұрын
It's still good, though I'm using the 4060 atm
@bikramdas817113 күн бұрын
I have same this laptop 16 gb/ 1 tb ...but battery backup is 3-4 hours approx is that normal or maybe some battery issue ?
@bikramdas817113 күн бұрын
For this laptop normal battery backup how long ?
@ataru-music14 күн бұрын
The first thing I did was replace that crappy CPU heatsink and also two case fans.
@MindzEye03rd14 күн бұрын
Thanks for the vid, just got my case and it didnt have a manual and your the only vid out there that actually goes through the case. The "headless" screw is called a Grub Screw.
@twc73315 күн бұрын
How do I get those settings in the top corner of the screen
@PokerFaZe15 күн бұрын
Msi afterburner combined with Hwinfo64
@jameshadaway862117 күн бұрын
my copper ihs and copper aio plate has 1 dark line after delide and thermal metal, only used mx6 paste between ihs and aio. can I sand my aio plate and should I replace the ihs to a new copper?
@Somi-x8i20 күн бұрын
do u know if it is possible to use the enhance power supply on a nr200?
@PokerFaZe19 күн бұрын
You need to buy a flex to sfx bracket to mount the psu
@Somi-x8i19 күн бұрын
@@PokerFaZe Thanks, I didn't know those adapter exists, with this I would be able to change to a smaller case if I change my mind
@PokerFaZe19 күн бұрын
They can be found on Ali :)
@FernandoSanzB22 күн бұрын
Can I ask you where did you get the stands for the case?
@PokerFaZe22 күн бұрын
Amazon. You can check in the description
@alanliang953823 күн бұрын
yeah, buying a single fan card and then caring about good thermal paste lol
@PokerFaZe23 күн бұрын
Who doesn't?
@tucosalamanca122525 күн бұрын
Hello. I'm planning to build on the Lzmod A24-V5. Do you have cpu cooler recommendations for Ryzen 7600x that will fit in the case? Thanks.
@PokerFaZe24 күн бұрын
You can check the one I'm using IS 55
@aravindaupadhya141129 күн бұрын
This is just a gimmick and affiliate. But it doesn't matter If you tighten the screws properly with equal amount of torque. And in India, I'm not getting genuine one, There is a glue which seeps into CPU pins and it could kill a motherboard. Beware.
@rsrareАй бұрын
It drives me nuts, i cant get any of these cases in Europe! Even the ones i found in US dont ship to europe.
@jovieasyrof2017Ай бұрын
not the thermal paste hahahahahaha
@azaeldrmАй бұрын
Do you know what thread is the scrws for the feet? Is it M3?
@PokerFaZeАй бұрын
I think so, you can grab them at Home Depot :)
@megurinemiku8201Ай бұрын
I own is60 Evo and I had no issues mounting it, just align the holes and screw down. Skill issue?
@PokerFaZeАй бұрын
Lul, yeah, definitely that and not the pressure applied to your motherboard. Good work 👍
@trevorbarney1796Ай бұрын
very well put together video. Been interested in this case ever since seeing it on Optimum's channel years ago. Tho i dont have a use case for something like this, it's still so damn cool!
@BritoWorxАй бұрын
front and back buttons don't work for me. They act like the left button. Any clues?
@PokerFaZeАй бұрын
Sorry. I have no clue, have you tried with another computer or phone?
@edupalacios4Ай бұрын
Buena máquina 👌
@setiyokАй бұрын
Just arrived today, the build is so cool...
@jari8698Ай бұрын
about the 24 to 10 pin issue, can I turn off the switch from the avr instead? And will it damage some components even if I turn it off from the psu?
@UCE9Y7VDUqXO6fjYF2_yms0wАй бұрын
hello have you tried axp53 on xq69? i wonder if for my 583d axp47 cant fully handle it
@gitgudpalАй бұрын
What a rejoice finding how to mount the PSU correctly! I only regret not finding it sooner. Perhaps editing the title or keywords would be great for the next people who will how to mound it. Anyways, I thank you immensely for such an effort. It really helps!
@PokerFaZeАй бұрын
Thank you
@bs9two42 ай бұрын
case is too $$$
@Gamingcs116922 ай бұрын
0:03 and again at 0:21 I had to stop watching there was too much going on in this promo video.
@sc94332 ай бұрын
you can easily snap on an exhaust fan on the top part of the casing with magnets, to move hot out the casing.
@thomastjiang99432 ай бұрын
Hi, may I ask, why don't you use 2 80mm fans for the top, why only 1 in the middle? Thank You
@PokerFaZe2 ай бұрын
I mentioned the reason at 0:55
@cheemsg.i.71302 ай бұрын
Can't locate the config file on the google drive
@philliphaywood13782 ай бұрын
@PokerFaZe- I have this same case and I tried to mount 2 slim 120mm fans to the top lid and the 2nd fan had to be removed because of the plug that goes into the PSU. How did you get yours to fit?
@PokerFaZe2 ай бұрын
I mounted full size 120mm, you need to turn the plug around
@philliphaywood13782 ай бұрын
@@PokerFaZe 😮 Thank you so much. Going to try that out today. Running a 7600X3D, RX6750XT, Aorus B550i Pro AX, Seasonic SGX 750w PSU, Noctua NH-L9x65 cooler, 64 GB Corsair Veneance LPX, (1) 80mm Noctua, (1) 92 mm Noctua (4) 120 mm Noctua. I was originally going to run 6 because Cougars website said you could install up to (2) 120 mm fans at the bottom of the case……but they didn’t let you know that it’s only possible with a single slot card. When installed there was literally no space between the GPU and the bottom case fans. It might not have hurt anything because the GPU fans and case fans all spun without interference and it was blowing more air directly on the GPU….but I didn’t want to risk messing anything up.
@PokerFaZe2 ай бұрын
Back then I installed two slim 120mm at the bottom with an Asus Strix 1080 Ti card. You can check my older videos about this case on the channel. Of course if you use thicker card, a front 80mm can still help
@galihkurniad2 ай бұрын
Anyone facing issues with the laptop charger? It won't charge
@folddyyАй бұрын
mine is still working properly, what happens if you press the power button on your laptop? does the charging LED blink 3 times even when plugged in?? if so check your charger or probably replace the charging port
@spectre47532 ай бұрын
Virtual controller is crashing right after opening game
@davidr94013 ай бұрын
Thank you for posting a very professional video on this case. You didn't say which screws you used on the 8015 case fans. Were the M3 16mm long enough to seat properly into the threads? It appears that using the wrong length will cause the bulging on the outside of the case. Also, with all the sides removed, wouldn't it be much easier to assemble and do cable management and then add each side to complete the build?
@PokerFaZe2 ай бұрын
I think I tried and it was not, to avoid that issue, you can try using a longer screws and add a slim washer to it. That could help prevent the screw from bulging the case. Or sanding the long screws to the correct size
@HaciendaHall3 ай бұрын
I found a reconditioned 600w Lenovo power supply and installed it. Bought a gtx1650 and a rtx3060 to try them on this unit and another. Every time I put either gpu in the fans spin but I get no display out. Even the motherboard hdmi out doesn’t work. Tried installing drivers for both gpu’s but nvidia app says no devices found. That’s after plugging in either gpu after running the computer before putting the gpu in. What am I missing?
@CARCINOHARDKISU3 ай бұрын
ok but the savedkey is an mp3 file... im confuse
@Stifle93 ай бұрын
FYI the card is 182mm long -before- you add the backplate. This happened to be the exact interior length of my most recent build, the V36pro case that I picked up from Taobao. I had to slide the fan shroud towards the rear of the card by ~1.5mm to fit the card into the case.
@IrisFifine3 ай бұрын
Thanks for reviewing the mic and boom arm! Well done~ The AM8 is a dynamic mic, so the closer your mouth is toward to the top of the mic, the clearer the audio. Hope you enjoy it. :)
@AhmedMoFawzy3 ай бұрын
out of context xd, it can run AutoCAD?
@greenprotag3 ай бұрын
an affordable low profile microphone arm? NICE. Fifine has been constantly stepping up their game. It's nice to see affordable products meet a minimum functional use. Anyone starting out should be happy to have something that is at least working for under $60 USD. The only thing better is maybe a used Yeti
@k.d.28993 ай бұрын
If u had used hdplex 400w I think msi 4060 ti ventus would fit in it. The psu u used not that thin.
@PokerFaZe3 ай бұрын
Even if you saw half of that card's length, it won't fit in 100000 years
@k.d.28993 ай бұрын
U mean the problem is about width of the card right?
@PesareShojae3 ай бұрын
Unimpressive, powerless and shitty? Wow unprofessional really.
@PokerFaZe3 ай бұрын
I have Faze in my KZfaq name
@PesareShojae3 ай бұрын
@@PokerFaZe 😒
@DefinitelyJarvisАй бұрын
He speaks the truth
@PesareShojae29 күн бұрын
@@DefinitelyJarvis No he doesn't, and even if he were that wouldn't justify that tone
@nhproduction073 ай бұрын
Can i used any controller for xenia canary.
@mehmetboluc92243 ай бұрын
I could not adjust the mouse setting
@Russiangamerpro20213 ай бұрын
I cannot tell what kind of motherboard he’s using because I try to find something on Amazon like this is like almost like misleading information on that website
@PokerFaZe3 ай бұрын
Mislead what? Do you know what itx is?
@Russiangamerpro20212 ай бұрын
I was talking about ITX motherboard. I need to know what kind of motherboard.
@Russiangamerpro20212 ай бұрын
Because I need to know what kind of mouth you’re basically using
@rwtw66493 ай бұрын
Pelican watertight case would be a great option for road tripping and traveling as a whole with this beautiful build. Great job brother. Am personally holding out a bit longer hoping to see soon AMD's promising Strix Halo offering.
@PokerFaZe3 ай бұрын
I bought a Samsonite backpack for $60 and it can fit this perfectly along with monitor and mouse, just not my keyboard. Good luck with your build
@diegofanali61573 ай бұрын
Nice video! it's all help me, expect for the hide cursor part. Because it say "the archive is either damaged or in an unknown format", how can i solve it?. but for the rest it's all nice.
@joegotit3 ай бұрын
Axp90-53x I have the same exact setup and use the full copper version of the axp90-53x and temp are so low max temps are about 80c
@mehmetboluc92243 ай бұрын
how to set mouse
@Aliya1233 ай бұрын
can you teach how to undervolt like you did to this build?
@PokerFaZe3 ай бұрын
You can download MSI afterburner, then search Optimum undervolt gpu on KZfaq, he has a very clear tutorial for it.
@Aliya1233 ай бұрын
@@PokerFaZe I see... I have this 4060 LP but it gets super hot as stock. I wonder if it's because of poor airflow in ITX case (mine is 4.6L) or the card is just hot in the first place? Would be nice to use it without turning down its performance 😢
@PokerFaZe3 ай бұрын
Undervolting is running your card at high clock with low voltage, so the card can run without performance loss with less heat. Mine's hotspot was near 90C at stock setting in an open air testbed