Does corner tool path can reference an end mill or bull mill?
@JITCADCAMКүн бұрын
It actually referances both. With rest machining in this path you select a Tool vs just using the mesh like the other paths.
@dnjmachine2 күн бұрын
I would like to signup for the free license!
@JITCADCAMКүн бұрын
Can you send me an email I would like to talk more on what your needs are and how to get signed up. [email protected]
@TwoBirdsOneStoned42015 күн бұрын
How do you leave a nub for the part off operation instead of totally parting off. Also for my boring operation I get warning saying “X clearance trimmed at the clearance radius”
@JITCADCAM15 күн бұрын
Can you send me an email directly Im happy to do a video call and show you those things. [email protected]
@neznamkaj25 күн бұрын
If you can share file link in description so we can easier practice, and not design it from scratch. That would be great 😃
@JITCADCAM25 күн бұрын
Ill see what I can do
@dilanpabon670927 күн бұрын
Phil, you can also find the Probe WCS operation in the SETUP dropdown in the taskbar.
@JITCADCAM27 күн бұрын
Lets Go!!!!!!!!!! This is why I love making videos like this. Even I find out something new. Im was more thing about there being a Probe section like 2D/3D/Drillinng.
@NiclasGudmundsson27 күн бұрын
This i will try!! Let's say I have a slight angle on my fixture and I probe let's say X axis, will fusion compensate for the angle if I run the program? Or will it only throw me an error!
@JITCADCAM27 күн бұрын
So Fusion Probe WCS will not adjust around C axis. You would need to use Part alignment in the Manufacturing extention. Send me an email Id be more than happy to do a 1on1 and review what your trying to do. [email protected]
@rwattАй бұрын
Just Found Channel, Loving it. How would you add another vice, say your part was too long for a singular vice?
@JITCADCAMАй бұрын
So you would model the first vise and do a copy past, follwing that 1 stock that would reach across both vises.
@drewnix7201Ай бұрын
Very helpful. Thank you!
@JITCADCAMАй бұрын
Glad it was helpful!
@dnjmachineАй бұрын
Hope you can keep up with doing these videos!
@JITCADCAMАй бұрын
That's the plan! Had to slow down to do some onsite trainings however looking to get some more videos up in the next few weeks.
@jasonshane4606Ай бұрын
It would be nice , if you remove your handsome headshot from screen… Thanks…
@JITCADCAMАй бұрын
Haha Ill have to put it to a vote on my next video.
@neznamkajАй бұрын
Can you explain how to use pyramid so I can put 3 parts on it with G54, G55, G56 on top of each but still to have a good orientation on table in simulation. Thanks
@JITCADCAMАй бұрын
so you can model it however doing machine sim with 3 offsets isnt possible. You could pattern them for sim and that would work.
@dnjmachineАй бұрын
Awesome explanation and walk-though.
@JITCADCAMАй бұрын
Glad you liked it!
@Whhhoo3_3939Ай бұрын
add actual machining video on milling cnc 4th axis
@JITCADCAMАй бұрын
Where are you located? Id love to come use your machine lol
@Whhhoo3_3939Ай бұрын
@@JITCADCAM lol...india....please ...u r welcome
@evgenym9860Ай бұрын
Thank you
@JITCADCAMАй бұрын
You're welcome
@usrenmaeАй бұрын
Great video- I wish you showed my favorite way, 2d contour the profile of the part 0.010 below model top with a few roughing passes. While it doesnt remove the stock above the part it makes it so there is no hat.
@JITCADCAMАй бұрын
Great suggestion!
@manuelnavarro4824Ай бұрын
Great videos bro
@JITCADCAMАй бұрын
Appreciate it
@dnjmachineАй бұрын
Congrats on 1k subscribers!
@JITCADCAMАй бұрын
Thank you!!
@dnjmachineАй бұрын
Great series! I would love to see some fixture design videos, In my mind I can't picture how I would hang 13" part off my 4th axis and keep rigidity.
@JITCADCAMАй бұрын
Do you have parts in mind that you could send me to take a look at?
@dnjmachineАй бұрын
@JITCADCAM That's a hard one as most are NDA but maybe you could do a fixture of the parts in this video. The stock in this video is 13 inches how would you have that sticking out from the 4th and be supported enough?
@dnjmachineАй бұрын
Good video man, always pick up something new watching you videos.
@JITCADCAMАй бұрын
Glad to hear it!
@elijahcbr6009Ай бұрын
So bad ass thank you!!!!
@JITCADCAMАй бұрын
Glad you liked it
@evgenym98602 ай бұрын
Thank you
@evgenym98602 ай бұрын
Thank you
@user-dp8yw7fh6b2 ай бұрын
Can I have 3D CAD to try learning? Teacher.
@JITCADCAM2 ай бұрын
So I dont provide models normally but you can watch a couple of my videos and they walk you through how to build your own vises to be used for this.
@tomahawkcnc55832 ай бұрын
Do you have a cheat sheet for what images are stored in fusion , I want to expand this to use the M130 image function to display tool information but the generic tool image has no information in it. A video of that would be great
@JITCADCAM2 ай бұрын
Ill see what I can do
@misupercooner2 ай бұрын
Appreciate the video! Do you know if there is a video on how to draw this in cad? Im learning as I go and want to draw it up myself then cam it myself. Appreciate the insight!
@JITCADCAM2 ай бұрын
I would sugget checking out my CAD4CAM Playlist. kzfaq.info/sun/PLwMFwAtjoRqy1TJMeNoFo3b4lgi6vtjbU
@misupercooner2 ай бұрын
@@JITCADCAM thanks!
@evgenym98602 ай бұрын
Thank you . This is the best explanation of how to work with the assembly.
@JITCADCAM2 ай бұрын
Glad it was helpful!
@arnoldo242 ай бұрын
Great video. Can you make a video on how to create or import custom tool holders please.
@JITCADCAM2 ай бұрын
Great suggestion! Ill see what I can do.
@chainsaw27012 ай бұрын
I had to delete the 3rd joint (@ 4:00 minute mark) where it orientates the vise to the Origin. It was later keeping me from orientating the stock to the Origin (@14:30 minute mark). Took me an hour to figure that out. Not sure why but that 3rd joint wouldn't allow the vise to move with the stock when I tried orientating the Origin to the top of the stock.
@JITCADCAM2 ай бұрын
Thank you for the feed back Ill look into it.
@jc45232 ай бұрын
Yet, another great video ! Good useful tips & tricks .
@JITCADCAM2 ай бұрын
Glad you like them!
@mattirvin17442 ай бұрын
Another great video! Any reason not to do this by creating a manufacturing model for each setup?
@JITCADCAM2 ай бұрын
Good question! yes cause you cannot utilize continuious rest machining in the setup.
@mattirvin17442 ай бұрын
@@JITCADCAM Ah...this explains why I get the warning "2ndOpFlip (Titanium): Continue Rest Machining: Cannot verify that the stock is transferred from the previous setup for rest machining. Verify that the model selections in both setups are the same." It works fine as long as the origins are correct. I need to start doing it the way you suggest in this video.
@JITCADCAM2 ай бұрын
So this friday I will be doing this same concept on a Tombstone with mulitple parts and multiple setups.
@cadcaetutorial20392 ай бұрын
so good lecture sir
@JITCADCAM2 ай бұрын
Thanks and welcome
@cadcaetutorial20392 ай бұрын
This lecture si very perfect sir
@JITCADCAM2 ай бұрын
Thanks and welcome
@YCM30cnc2 ай бұрын
Giveaway of more good content and a few t-shirts & some one-on-one Zoom or similar training time; lots of value to recipient AND manageable cost on your side. (At least that’s what I would want if I won LOL)
@JITCADCAM2 ай бұрын
Great Point I didnt even think about training and support packages.
@MrRctintin2 ай бұрын
This is GOLD!! Your subs should be in the 10’s of thousands!! Your channel will grow, because you are committed to bringing new content regularly to us, and thank you for that. I’m just about to embark on the world of 4th axis milling in my Syil X7. Have you done a video on basic first time setup for 4th? I have my centre closing vice and stock setup done, and perimeters setup, but I’d like your input on WCS positioning, how to get that done accurately, and getting the first basic tool paths done ? Many thanks Phil.
@JITCADCAM2 ай бұрын
Send me an Email im more than happy to work with you next week on it. [email protected]
@travisguilbeau84042 ай бұрын
As far as the giveaway anything is great but honestly the best thing you can give is what you’re already doing, giving knowledge and good tid bits of info. I got you on LinkedIn as well. Love the content
@JITCADCAM2 ай бұрын
Thank you for that, However i wanna give the love back.
@travisguilbeau84042 ай бұрын
Heyyyy! I never knew about the model selection! I always wondered why sometimes my stuff wouldn’t carry over! That’s a good tip to know
@JITCADCAM2 ай бұрын
Glad you liked it.
@ScottDube12 ай бұрын
Great video, I could use a seat!
@JITCADCAM2 ай бұрын
To buy or enter to win if you cough the easter egg at the end.
@ScottDube12 ай бұрын
@@JITCADCAM enter, I did catch it.
@SmallShopConcepts2 ай бұрын
great info! but you forgot to add the code to the description :D
@JITCADCAM2 ай бұрын
Suprisingly I didnt lol I was waiting to see how long till someone asked HAHA. Lets me know who actually watches.
@SmallShopConcepts2 ай бұрын
@@JITCADCAM any idea why the stock size is being converted to metric even with the part model and ops being in inch?
@SmallShopConcepts2 ай бұрын
@@JITCADCAM Also, wondering if you could tell me how to pull out the work origin location. I found this parameter, but it seems to ALWAYS say "top center" onParameter('operation:view_origin_boxPoint', 'top center')
@user-oq4zu7mf2u2 ай бұрын
Great! The video inspired me to edit my favorite annotation information
@JITCADCAM2 ай бұрын
Great to hear!
@terrellbradshaw35042 ай бұрын
Do you have to delete and repost the video to fix the spelling in your video title?
@JITCADCAM2 ай бұрын
Haha, Nah but thanks for pointing that out. It was a very late night last night creating this video.
@terrellbradshaw35042 ай бұрын
@@JITCADCAM very understandable...i enjoy your content. Really helps me out being a one man show, side job shop
@JITCADCAM2 ай бұрын
Where you located Id love to swing by and see your shop if im ever in the area. Feel free to send me over your info and ill add you to my map. [email protected]
@jc45232 ай бұрын
Great set of videos! i recently got thrown to run a Hurco lathe (tmx10yi). How can i program tail stock on fusion360? . i’m currently doing it by hand code . Thanks .
@JITCADCAM2 ай бұрын
Thank you, Send me and email and lets verify your post and your workflow. [email protected]
@user-oq4zu7mf2u2 ай бұрын
I encountered a post-processing output program that is mirrored, and I don't know which parameter to modify for post-processing
@JITCADCAM2 ай бұрын
Can you shoot me an email with more info Id like to look into this more. [email protected]
@user-oq4zu7mf2u2 ай бұрын
@@JITCADCAM Sent - post-processing - there is also a mirror end face cylindrical image
@JonasDM462 ай бұрын
Very informative video. Any possibility on changing the post so that this bar pull program can be used with a regular bar puller instead of a sub spindle ?
@JITCADCAM2 ай бұрын
Yes, We could for sure work something out to make a turret bar pull work. Send me an email [email protected]
@harrisonottens2 ай бұрын
Happy your back Phil! We just out first 5 axis mill, a video on how to handle vise models for op1 and op2 in the same fusion file would be very helpful. Op1 having the vise holding onto stock and op2 holding on the part. I am just wondering whats a good workflow for this.
@JITCADCAM2 ай бұрын
I can see what I can come up with for this. Also I can do 1on1 training or in person depending on your needs send me an email. [email protected]
@harrisonottens2 ай бұрын
@@JITCADCAM Thanks the response, I'll shoot you an email if I have any questions. I am going to give it a try on my own but I'll reach out if I need training.
@pompeyboy52 ай бұрын
Great to have you back 😀
@JITCADCAM2 ай бұрын
Thanks! 😃
@travisguilbeau84043 ай бұрын
Some things I’d like to see is some advanced tips and tricks when using a 4th axis. Like profiling parts and having ball endmills use the tilt and lean or any of the 5 axis tool paths. I recently used something like that on an oblong part and it was tricky to figure out if you’ve never used those features.
@mizyks99864 ай бұрын
Super helpful. Thank you!
@JITCADCAM4 ай бұрын
Glad it was helpful!
@emre85364 ай бұрын
Thanks for video.. :) As someone who uses Inventor Cam and Fusion 360 Cam, I can say this... You can do a lot of work with these software. Except for this part. You cannot process a Turbine Propeller efficiently and well. Maybe you can make 1-2 pieces. But if you are going to make hundreds of these parts in mass production, F360 is definitely not for you... Fusion 360, HSMWorks and Inventor Cam work well with 5 axis indexing. But when you want to process a very complex part such as a Turbine Propeller in 5 axes simultaneously, it will be insufficient for you. Autodesk's only solution for this job is Powermill.
@Kveiteson4 ай бұрын
Seems like Fusion is very bad with such parts and this model is still a very simple impeller! Your roughing…., a lollipop for finishing and deburring toolpath?? Come on man, you really can do better, this is. Please make some videos that are helpful and not such a waste of your and our time. Sorry not sorry
@JITCADCAM4 ай бұрын
Haha thanks for the feed back. Yes this is a simple design as well there could be several more paths but the video isnt about how to do everything its about changing how people think when using the software. I would gladly make an hour plus long video about anything the thing is nobody watches it.
@Kveiteson4 ай бұрын
@@JITCADCAM the style of the video is great, don’t get me wrong. I just think you should focus on methods and toolpaths that would be used to machine such a part instead of randomly chosen strategies. You would teach people how to program an impeller and use Fusion at the same time, instead of that people maybe pick up how to not program such a part. That’s not good neither for the people nor the shop they are working for
@raider16284 ай бұрын
were did you come up with 4deg ??
@JITCADCAM4 ай бұрын
Been a min from when I made this video however if you look up the thread specs to what your trying to make it should give you the Degree at which your threads are needed to be Modeled.