Nice pcb layout, and thx for the effort. I might order some pcb's too. Any decent ali options for some 230/5v for ceiling mounting them deep outlets, or would it be a firehazard trying this out?
@DIYHelper7 күн бұрын
@@Hemshemsems if not visible all the time I would go with some mean well ps, at least those are well made
@safutayar32887 күн бұрын
its brushless motor or brush?
@andrewharding98108 күн бұрын
In temperature mode it takes ages to come down to your pre-set setting, it does do it eventually.
@firsttradecompany10 күн бұрын
Hi, Which 12 teeth caper you use the release the bearing? Which # you use?
@poellot11 күн бұрын
I had the cl model with the easystart. It was on sale for half price. I loved it, used it the last few years on my daily driver Volkswagen. In winter here it can get so cold that a few nights a year i wanted to run it all night. I could not do that, the timer only let me go 2 hours. I just changed it out for the cs model. With the easystart pro. Not only do i now have the option for up to 12 hours or infinity just in the timer, but i can later if i want, use the s+ for other options. I think the cl was a pretty poorly implemented. If eberspacher had made a s+ input into the controller would have been fine, or let longer run times, i was perfectly happy with my heater, just hated the two hour limit.
@poellot11 күн бұрын
I am a small fleet mechanic and we have about 10 of the original airtronic heaters , when a driver says it's not working it has only ever been a bad gasket for the cumbustion chamber. Simply disassemble clean and put in a new gasket. Recently I installed a new airtronic 3. I have not disassembled one yet, the wiring looks more difficult difficult being in one plug rather than each sensor and glow plug having there own plugs.
@poellot11 күн бұрын
I am wanting to buy one for myself. I like the brushless motors, but looking at the design of them, I am leaning towards buying a 2 and avoiding the 3.
@offpro14 күн бұрын
Thanks for the video. First time working on a diesel heater. Problems starling and white smoke. Cleaning the diffuser, plug and burn chamber made it work again. 😊
@mihaitaflan602121 күн бұрын
Salut,ce parere ai despre s3,merita, sau e mai bun webasto?
@DIYHelper21 күн бұрын
@@mihaitaflan6021 ca și calitate sunt la același nivel, cea mai mare diferență ar fi că S3 are reglaj automat în funcție de altitudine iar webasto nu.
@mihaitaflan602121 күн бұрын
@@DIYHelper aici in sua motorina f proasta le distruge,se carbonizeaza repede.mult mai bine merg cu 50-50 motorina si kerosen
@DIYHelper21 күн бұрын
@@mihaitaflan6021 pai este S3 pe benzină
@mihaitaflan602121 күн бұрын
@@DIYHelper s3 d2l e diesel
@DIYHelper21 күн бұрын
@@mihaitaflan6021 exact, dar AS3 B2L e benzină
@Cycyos28 күн бұрын
Un glet de valoare este... Gletul de ipsos tata ați înțeles... Dar.... Cine știe sa îl tragă pe pereți.... Asta pt cine știe, nu pentru toți meseriași de cartier 20-30 de ani pământești.... Ca pe unt... Se ia din butoiul de varza de 60 de litri👍👍👍👍
@notaperson3338Ай бұрын
Thanks for the great video. I have a Hydronic D4W 12v (25 2096 05 00 00) but the control panel was not covered in the video. It is a Combitronic panel and the temperature up and down and enter buttons stopped working?? Can I use the Easy Start Timer as a replacement?
@DIYHelperАй бұрын
Combitrobic is developed by Eberspaecher UK and it has not really made it to Europe mainland. Looking at some diagrams these are more complex than simple controllers so you can't replace it with any controller shown in this video. It would be better for you just buy the pane as I seen it is a separate part from the controller itself.
@notaperson3338Ай бұрын
@DIYHelper thank you for your quick reply, I really appreciate it. Sorry, you refer to a pane, I am not sure what you mean. Can you elaborate please?
@DIYHelperАй бұрын
Autocorrect strikes again, so according to the diagrams the system has a control panel which is just the buttons and display and a module which actually does the controlling. So probably you will need only the panel. Maybe ask butler technic or eberspacher direct, just these into Google.
@notaperson3338Ай бұрын
@DIYHelper thank you for your help 🙏
@emanuelconstantin6266Ай бұрын
Cum de nu ați testat nimic de la Knauf? Cele la găleată?
@BogdanSerbanАй бұрын
Cel de la fino grande mi s-a parut ca se intareste foarte repede (mi s-a intarit in galeata in 10-15 minute). Poate am nimerit eu un sac vechi...
@RichardHughesSpokeCultureАй бұрын
Thanks so much for this, just what I was looking to do after I purchased both these sensors for an ESP project. I have used your file and ordered a handful via JLPCB. Appreciate your efforts and sharing this with the community.😃
@dustinfrost5214Ай бұрын
Just pull the fan back a little bit 😂😂
@dustinfrost5214Ай бұрын
Qhy do people keep poppin that end cap off to remove the unit theres absolutely no need for it
@mehtimiesАй бұрын
Always new o rings.
@user-fh8bi8un2kАй бұрын
Price
@alexanderabachi9435Ай бұрын
Is there anything I missed to press, like the button you pressed before it supply out
@alexanderabachi9435Ай бұрын
After Modifying mine, it's not working...
@DIYHelperАй бұрын
You didn't do something right, mine is working almost 1 and a half years already
@alexanderabachi9435Ай бұрын
@@DIYHelper I wish I would have send you the picture of what I did
@ericbelanger6900Ай бұрын
Very well done! 😊
@SSTraveler-SandyАй бұрын
If your using it with 3000w inverter and minimum 300ah of Lithium batteries, you need to add a soft start to dampen the LRA of 48.5a to something less than 24a. Looking at the wiring diagram it's clear from the wiring diagram that there is no soft start, the type that significantly dampens LRA rating. Otherwise the Lithium battery can't supply the huge compressor start in-rush current. I had to add a SoftStartRV to my Atmos to get it to work from my 13vDC Lithium battery/3000w system. The SoftStartRV did solve the compressor in-rush issue by cutting it in half. I don't understand why a soft start wouldn't be automatically incorporated to reduce the LRA to less than 24a for a real game changing RV air conditioner on 120vAC or 13vdc power systems alike.
@Chrisjones521112 ай бұрын
Very good thank you, I'm doing my fabia estate 2006 soon and this has helped me greatly!!!!
@TotalyRandomUsername2 ай бұрын
Timewaster!
@gotsloco18102 ай бұрын
Nice video. This is a different animal than a Hydronic 10. Why not coat the screws lightly with Anti-Seize to ease latter disassembly?
@l0gane3 ай бұрын
Did it ever work?
@DIYHelper3 ай бұрын
No
@Ursulalb3 ай бұрын
Daca tot ai vrut sa incerci mai multe categorii de glet trebuia sa aduci si gleturile Apla , au cel mai bun glet de incarcare
@stco24263 ай бұрын
Cool (or hot). My kit (not and Airtronic, but not a knock off either) came with an intake silencer. It's maybe a fraction smaller than the one you have here, iIt's not easy to tell and it also makes a big difference. I think it knocks down some of the combustion roar that comes back up the air path and also the noise from the blade tips. Intake piping is also useful as it reduces the chance of sucking up stuff into the heater. It also makes the heater less noisy for anyone else close by. Thanks for this!
@deutschmitboris3 ай бұрын
I truly love your channel. Keep doing the best work! 👍
@CristeaViorel-yk7mn3 ай бұрын
DEPINDE ȘI DE MANA DE LUCRU
@dangrec13 ай бұрын
You are a legend, thankyou very much. This fixed mine and now it's flawless!
@ercanyilmaz81083 ай бұрын
Thanks for sharing this video. I have tried ZHA and Zigbee2mqtt both in Home Assistant and I decided to stick in with Zigbee2mqtt since some features are better supported with this. The plugs have for example the child lock function which is normally available in the original Tuya app. This feature is missing for some switches in ZHA but in Zigbee2mqtt it is available.
@Nehemoth_G3 ай бұрын
Exactly what I was wondering about the thermal paste. Thanks
@user-jz1ht8ry2w3 ай бұрын
Good video. Any idea when staring it sounds like a plane taking off?
@user-qe1th9je5q3 ай бұрын
Magnificent very helpful thank you
@Langan0074 ай бұрын
How did you pair the switch? That's what we all want to know
@DIYHelper4 ай бұрын
If I remember correctly you need to hold the middle button until it starts blinking
@havenissen81854 ай бұрын
Hello, do you know anything about error 71 and 17? I can see that it is related to the temperature sensor, i tried measuring the resistance on the sensor and that reads okay. I tried shorting the wires to the sensor like the manual says to do, but that didnt change anything either. I originaly had the error 31 and used you video to fix it, but now i get the error 71 and 17. I read in the manual that to test the controller for the heater i would need the diagnostic tool you use in this video but i dont have access to one. I hope you have an idea for a solution.
@Josuehernandezmusica4 ай бұрын
hello I have my unit locked what is the usual cost for a repair like this ?? thank you
@user-po9hc4qs4s4 ай бұрын
Наклейку сними, чепух
@remigijusosinskis39684 ай бұрын
Back to school for lessons
@roccosartone65604 ай бұрын
Good morning first of all thank you for the beautiful videos I am an Italian who has an Eberspacher hidronic Q4W sc could you help me to repair it? If so, please give me my email, thanks
@silvanocometta97604 ай бұрын
Thanks for this truly excellent video. Very well done!!
@jahanzebabrar28134 ай бұрын
Thank you for nice video I have just cleaned my filter after using your video. Once again Thank you very much
@gigibalcon4 ай бұрын
Multu pentru video, am reusit sa resuscitez si eu unu cu problema asemanatoare! ✌️🤟
@vreaucsАй бұрын
si eu mai multe. eu am frezat si am relipit toate contactele✌✌✌✌ ideea mi a dat o un tehnician de la eberspächer
@c-mcd4 ай бұрын
What’s the tune?
@tomasmacholda84674 ай бұрын
I wrote to you on Instagram. Can we write? I have a few questions.
@lappi_wojak5 ай бұрын
Is it hard to remove this heater from the car? Is it safe to run car when heater removed?
@imageislandmarine49885 ай бұрын
Thanks for the video. I had the same fuel problem and was able to save the pump by polishing out those scratches, works perfectly now! Also for you DIYs with out testing equipment. On your B2 connector pin #5 and #2 you can use a LED with a 1K resistor to get the flashing error codes. If the unit is locked out you can take the yellow and red wire and apply DC power to it for 3sec. then the unit will unlock.
@kiyaglassey42815 ай бұрын
I have the same heater but it will not get hot just blows cold i had it all apart glow plug works of a battery but fan only comes on in the high setting any help would be great thanks 👍
@DIYHelper5 ай бұрын
Whit out an error code I would suspect a fuel problem, check if the pump is really working
@HunterHastings-vv8mh5 ай бұрын
Thanks for taking the time to do such a great video for us. I've had my espar running only ~6mo with regularly screen servicing. I'll use your tutorial to go through everything.
@hjhenk4225 ай бұрын
well how do you clean it the right way ?
@DIYHelper5 ай бұрын
For me the only way is to change it. You will find in the comments all kinds of solutions. If they work or not I don't know. Probably not.