Bco 4th spt bn mn , we had light, med, heavy, even had a 4670 transstar 2 from the pdo yard. I miss the 8th
@staym9259 күн бұрын
Thinking about the same thing but for the cab.
@ChasePalsson25 күн бұрын
Great video, except for the fact that the county I'm in has about 2 to 3 of each brand of tool truck and nobody carries that Matco wrench you showed us For anyone needing to do this job, harbor freight makes an icon brand S Wrench. Between the S wrench and a napa moon wrench you can get the bolt off. Or, what I did is cut the 9/16 end off the S wrench right around the "9", turned the end around and welded it back together as an extended moon wrench and it works great. You don't need to weld it back together, if you just cut the end of and smooth out the edges you'll be fine. I just welded it back together so that maybe if I ever need the 9/16 end I'll still have it
@staym925Ай бұрын
Do you know why my 1983 m925 with nhc 250 without abs wont shift into 5th gear, it has no issues in shifting into Reverse, 1st,2nd, 3rd or 4th.
@victorcarreras2499Ай бұрын
I just to fix that tires in the army,has to replace the O ring
@jackschissler255Ай бұрын
You should have a red low air light with a buzzer comming on once any gauge hits 60. Something isn’t right here.
@jackschissler255Ай бұрын
I’m not understanding the use of the Big Spring? All vehicles that use this valve/break pedal setup does not have this spring so I’m confused.
@tosilАй бұрын
Sounds awesome!
@phillipstuart33182 ай бұрын
Hey buddy is that 10 lug the same as a simil 10 lug
@wessimpson27942 ай бұрын
Yes. Semis and these stare the same 10 lug budd pattern.
@codykennedy192 ай бұрын
Sir, this is absolutely amazing. Can you please do an extremely long driving video of this truck because I love the sound stay safe man I hope all is well with you and have a blessed one.
@azdrivingschool2 ай бұрын
Hi Wes Simpson May I use this on my channel, full credited of course? Where did this happen ? Thanks
@victorcarreras24993 ай бұрын
I fix those in the army
@joshuavelez25843 ай бұрын
I have question if put that transmission to mack r600 model what the truck need fit thar transmision to mack
@wessimpson27943 ай бұрын
Flywheel and adapter ring. The adapter ring is a big splined ring that bolts where the clutch would go. I have both in Memphis if you are interested. Send me an email [email protected]
@romancruz54183 ай бұрын
Just rebuilt the fuel pump and replaced the fuel lines. Truck idles fine but seems like not enough fuel gets to it when driving. I can only go 20 mph and then it shuts off as if not enough fuel gets to it
@staym9253 ай бұрын
Would you know why i have air coming out stem on service brake on middle axle? I have new treadle valve, both brake relays are new, all new diaphrams both service and spring, press peddle and brakes work fine, full pressure on both primary and secondary, new q2 valve, i press brake and works but when press harder to floor, i start to get air coming out stem blowing into the hub, on center axle on passenger side. Its 83 m925, it doesnt have abs or ctis.
@wessimpson27943 ай бұрын
You blew a hole in a diaphragm on the service side somewhere. Applying the brakes when sitting still is one thing then putting the more air to em is another. I had the same issue on a truck and it drove my crazy till I went back and checked the diaphragms again. Even new ones can be weak.
@staym9253 ай бұрын
@@wessimpson2794 just great, yeah I went threw whole damn system, tore apart everything, cleaning, replacing and expecting that since everything is new, should have zero issues for awhile, then I heard faint leak, and notice that air coming out, shooting into hub, thought what would cause that. I guess go back threw and check them. Thanks for your help Wes.
@wayneminor55593 ай бұрын
I run two Japanese Ford Tractors, an 1100 and an 1110. Even with preheat, these things, one in particular, is a PITA to start, doubly so in cool or cold weather. Yesterday I saw this but bought a HF 149 dollar charger that alleged to have "200 Cranking Amps." It turned out to be a dud. This morning, I will exchange the over rated charger for one of these as my old Jump Pack finally bit the dust. Thanks for a video showing what you had (voltage) before you switched this on. You and the guy who posted starting a Cat Front End Loader in the snow have convinced me. This should be overkill for my little tractors but overkill I will.
@oconnormathew69493 ай бұрын
Is this all the same for the big cam familly? Im preparing to do an inframe on a big cam 1
@ivanmendoza49434 ай бұрын
He'll yeah
@Firestrike404 ай бұрын
How expensive is this detector and where can I buy it?
@wessimpson27944 ай бұрын
They are $600 these days Was $500 when I got mine store.valentine1.com/Store/item.asp?i=20020
@Firestrike404 ай бұрын
@@wessimpson2794 thanks
@dccdrivingacademy4 ай бұрын
Hi there, Can I use this video on my channel? Full Credited.
@wessimpson27944 ай бұрын
Yes
@dccdrivingacademy4 ай бұрын
@@wessimpson2794 Thank you very much!!
@Chopps3114 ай бұрын
Been referring back to those videos for years troubleshooting our fleet of m931s. Just wanted to say thanks for sharing here and on SteelSoldiers. Much appreciated.
@NOMAD1GHOST4 ай бұрын
@wessimpson2794 I need some advice i working on putting wedge brakes on my 818 is there any difference in spider pilot hole and I also have other questions i would like to ask if you don't mind
@wessimpson27944 ай бұрын
Spider and everything should be able to transfer between axles if you have the whole other axle the tubes are the same
@NOMAD1GHOST4 ай бұрын
@@wessimpson2794 so I was correct the spider and the backing plate are a direct swap. What about the drum and hub. I know the drum is different but is the hub different also
@wessimpson27944 ай бұрын
@NOMAD1GHOST hubs are the same Seals. Bearings studs. 939 studs are longer than 800 series studs. And an 939a2 series hub is completely different of course. Those hubs aren't a straight hub section so they are obvious to know the difference
@NOMAD1GHOST4 ай бұрын
@@wessimpson2794 thanks for the Intel do you know where the best place to get the brake cans drums and shoes
@wessimpson27944 ай бұрын
@@NOMAD1GHOST depends on where you are located.
@ricardogarza72055 ай бұрын
how long did it take to do the full install?
@wessimpson27945 ай бұрын
Maybe 90 minutes for the whole R&R
@mariaisabelcardenas25106 ай бұрын
This would put a truck out of service in a scale house?
@wessimpson27946 ай бұрын
No. As long as your weight isn't too much for the tires on the ground
@chadwaterman37036 ай бұрын
What did you do to get 6th gear out of your TCM... Stock they are limited to 5th gear...
@wessimpson27946 ай бұрын
Allison can reflash it. I have the program code you need to take to your allison dealer. Just email me [email protected]
@elchapo88336 ай бұрын
what is the name of this weapon ?
@wessimpson27946 ай бұрын
airforce texanLSS in .50cal
@TheCobra19226 ай бұрын
Bro drove the M920 in the Army and loved it.
@wessimpson27946 ай бұрын
I have a heavily modified 920 in my videos. Dual 55 winches. 13spd triple OD. 55000 transfer case. Stretched.
@Rsfarmerbob6 ай бұрын
Nice hm these run?
@wessimpson27946 ай бұрын
Around $300 right now at harbor freight
@Rsfarmerbob6 ай бұрын
@@wessimpson2794 cheers sir ty
@justinriekhof23796 ай бұрын
What kind of diesel consumption do you have? 14L Cummis
@user-wx4ig8kw4f7 ай бұрын
Can you explain the reasoning for this a bit? After my M1078 A0 has been running an hour+, im getting some serious random voltage surges making the lights bright and even turning the wipers on occasionally. Thinking its the voltage regulator. Saw this and am a bit baffled.
@apaulothegreat15818 ай бұрын
Help me please. I have a kenworth and a Volvo. Both are about 17000 lbs. Tow the kenworth 1200 mile. Will it follow ok. Military tow bar. Please let me know if you can. Thanks
@apaulothegreat15818 ай бұрын
A Volvo pulling a Kenworth. Both trucks are about 17000 lbs. Each. How well would the steering be on Kenworth towing it. How fast ? Thank 1200 miles to tow Kenworth
@michaelterlizzi16848 ай бұрын
This man is my new hero! Awesome job thank you for the tips
@billyjoeLOGTRUCKco8 ай бұрын
Thanks big Wes!!!
@derkdiggler46348 ай бұрын
Will this trick get rid of loss of power while accelerating?
@wessimpson27948 ай бұрын
Could if the solenoid isn't opening up all the way under voltage. Have you changed your fuel filter? Is it hard to start when cold?
@carterbowie82239 ай бұрын
Not sure if you still have the truck. I have 2 transmissions (Cat 16 speed air shift) that I would consider selling for a very reasonable price if you where interested
@staym9259 ай бұрын
I like to lay on ground and run over the tire with a truck, or let the drum of the truck down onto the tire.
@whorti19 ай бұрын
My abs went out could it be this top solenoid causing my issues I just replaced my alternator because it was over amping
@wessimpson27949 ай бұрын
Rebuild the whole protection control box with solenoid 24063. Both of them. I have a video on doing this
@whorti19 ай бұрын
@@wessimpson2794 hey sorry to bother you but before I rebuild it my abs light comes on but stays on would this fix it
@whorti19 ай бұрын
I also don't get the diagnostic clicking when I turn on the battery and starter switch do you know what that could be I did before
@wessimpson27949 ай бұрын
@whorti1 there is an inline fuse behind your abs light in the multi color harness. It's 5amp its blown
@whorti19 ай бұрын
Mine isn't that was the first thing I checked
@whorti19 ай бұрын
Hey i dont know if youll be able to answer this but my 5th gear lockup solenoid im not sure is working when i have the positive wire plugged into the wiring harness my truck falls flat and dies when i try to give it gas but if i unplug it it drives just fine do i need to replace the solenoid or is it something else
@wessimpson27949 ай бұрын
Is the button on the transfer case lever stuck? That's usually the culprit. It's either stuck in on the handle or the switch there has failed.
@RicoCantrell9 ай бұрын
Good info brother. I just got one of these sonim soaking up all the info I can.
@staym9259 ай бұрын
I got a question, i have a cummins nhc 250, 855 and it won't idle under 1300, at start up it will idle at 600 for 20 seconds, then jumps up to 1300rpms and stays thier. I adjusted idle at pt pump, I've turned down 3 times, and each time idle at 600 then jump up, adjusted again, idle at 500 then jump up on its own, adjusted again, idle at 500 and jump up to 1300 rpms, i can shut truck off, start up and idle at 600, then 20 seconds it jumps up to 1300 on its own and stay right thier. I'm not sure, it don't act like getting air, because don't stumble at all, everytime I start it, it starts right up, no hesitation.
@wessimpson27949 ай бұрын
Does it do this with the linkage completely removed from the shaft?
@staym9259 ай бұрын
@wessimpson2794 yes, I unhooked it, and pushed on it to make sure that it's all way against the stop.
@staym9259 ай бұрын
@@wessimpson2794 I figured out, the button had slight amount rust on it, and sticking.
@staym92510 ай бұрын
Why does your engine not have the tach adapter on the speed cable?
@garygeer764610 ай бұрын
Is there an internal part in the injector pump that affects the idle?
@user-ln2jd7qk9f11 ай бұрын
I need one Cummins big cam 350
@user-ln2jd7qk9f11 ай бұрын
Did you find a replacement?
@user-ln2jd7qk9f11 ай бұрын
What part number is this can’t find it
@moejr1411 ай бұрын
Where can I buy the plug for this?
@wessimpson279411 ай бұрын
Charging plug?
@moejr1411 ай бұрын
@@wessimpson2794 yes
@revvinevan01411 ай бұрын
My pump is slightly different. Its a 97 f800 with the bosch pump 8.3