What is the difference between Vario KB1 and American Duck type. ?
@jaymahony5 ай бұрын
can i do all in this video without the plasterboard, just the insulation and vario?
@paulandrews4517 Жыл бұрын
Crap install no ventilation gap ? Wth you put that inserted like that expect the condensation to come along soon ? Bad advertising 🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔🤔
@jooie4443 ай бұрын
Why? It's a breathable membrane. You're allowed if it's breathable but if it's that bitumen felt then yes, you need a 50mm gap.
@PaulARSENALFC Жыл бұрын
Prefer this if using Tyvek or other breathable felt, who uses anything else now, then the rafters can breath, think there’s a lot of brown envelopes being passed around to use solid PIR boards, which, no matter what you do to contain the dust, it’s gets everywhere, I purchased a festool cutting tool for it, with my festool extractor, the fine dust still gets everywhere, also, we tested some with a lighter, it’s burnt with rancid black smoke, I’d also say the PIR boards are more hazardous to health, it’ll be banned, it should be banned.
@trailnomade2 жыл бұрын
Vario Bond without PRIMER?
@velvetcoolcat49642 жыл бұрын
I have wooden slated boards running under the tiles. Would it be ok to push insulation right up to this?
@shantelguetgen41573 жыл бұрын
Good and very accurate designs are on the Stodoys plans website.
@mr.c63244 жыл бұрын
yeeessss
@griftersvids90854 жыл бұрын
No way Building Control would let you get away with that
@IsoverIreland4 жыл бұрын
Hi there, thank you for getting in touch. Full fill insulation is permitted under BS 5250 which is the code of practice for control of condensation in buildings. Full fill in a pitched roof application is acceptable where you have a breathable roof covering under the standard. It is also cited in S.R. 82:2017 which is the Code of Practice for Slating and Tiling where it is recognised that full fill mineral wool is compressible and won't hinder the job of the roofing membrane. Please contact the technical department for further information www.isover.ie/contact-our-technical-team
@quintdewit48703 жыл бұрын
How does it feel te get told how to do something
@enforze2 жыл бұрын
😃
@DVDFHardTarget4 жыл бұрын
Rockwool far better than this stuff. You need a 50mm air gap unless you use breathable roofing felt. Wouldnt use any kind of glass or [insert name] mineral wool.
@IsoverIreland4 жыл бұрын
Hi there, our mineral wool creates a fully breathable roof system in conjunction with a low resistance underlay and air-permeable roof finish and a well-sealed ceiling in accordance with BS 5250 and therefore doesn’t need the 50mm air gap. Risks due to building failures can be further mitigated through the use of the Isover Vario airtightness system. For further details, please contact our technical department www.isover.ie/contact-our-technical-team or check out our courses at the Saint-Gobain Technical Academy - www.saint-gobain.ie/technical-academy
@johndarcy25452 жыл бұрын
It's good to know that the 50mm air gap is not necessary when there is a breathable membrane. That's music to my ears as I went and bought the stuff the same width as my rafters not thinking about it. For the comment about rockwool. It's not in the same league as Metac sorry. Rockwoll won't stay in the rafters. It breaks up easily and itches like nothing else
@AlborginalTV5 жыл бұрын
Super
@alikhan79035 жыл бұрын
What goes on the top of the main wood frame from the outside? The same thing?
@IsoverIreland5 жыл бұрын
Hi Ali, different materials are used from the outside, please contact our technical team for more details around it www.isover.ie/contact-our-technical-team
@newmmusic5 жыл бұрын
What about the 50mm air gap required between insulation and felt? Surely this will cause condensation build up?
@IsoverIreland5 жыл бұрын
Hi Joe, if it’s a breathable roof covering (natural slate, concrete roof tile or fibre cement slate with battens and counter-battens and a low resistance underlay) a ventilated space is not required. If it’s a not breathable roof covering (fibre cement slates with only counter-battens or bituminous felt) a 50mm continuous ventilated space is required all in accordance with BS5250. Best thing to do is to check with our technical team to see if the roof meets these requirements www.isover.ie/contact-our-technical-team
@gdfggggg5 жыл бұрын
In my area building control won’t let you install this stuff as it soaks up condensation.
@Jelop6665 жыл бұрын
1.Should be a gap between the ISOVER metac and the roof 2.Two layers of Isover metac rools - first vertically and second horizontally 3. Aluminium Channel U or C shape on the top 4. On the aluminum construction ISOVER VARIO® KB1 tape and finally STOPAIR ISOVER membrane ( half price - around 55eur for 67.5m2 ! in EU ) or most expensive VARIO® XTRASAFE - ISOVER VARIO DOUBLE FIT
@IsoverIreland5 жыл бұрын
Hi Sebastian, if you need help or have a question, contact our technical team: www.isover.ie/contact-our-technical-team
@ryanh32856 жыл бұрын
Does there need to be a gap between the insulation and roof tiles?
@IsoverIreland6 жыл бұрын
Hi Ryan, it depends on the type of roof tile and roofing felt that are used and whether they are ‘air open’ or not. Best thing to do would be to contact our Technical Team: www.isover.ie/contact-our-technical-team
@ross20076 жыл бұрын
What happens if you have some air vented roof tiles, do you leave a gap for that bit or go over it?
@IsoverIreland6 жыл бұрын
Hi Ross, thank you for getting in touch. Best thing to do would be to contact our Technical Team: www.isover.ie/contact-our-technical-team
@felixreali71013 жыл бұрын
would it not be easier/better to post the reply right here where everyone can see it?
@jlewis16883 жыл бұрын
@@felixreali7101 They don't know the answer
@bsfbestshortfilmsonyoutube6 жыл бұрын
LOVE THIS AD. most places I lived where poorly soundproofed.
@teoiorg7 жыл бұрын
Very nice!
@antonshkabara30907 жыл бұрын
If you want you can learn from woodprix scripts how to make it yourself.