Did you let the pcv vent to air or did you block it off ?
@damonryn5 күн бұрын
@@onlyunojhuno still got to figure this out, I think I’ll put it through catch can then back into the intake as West Aus regulations don’t allow you to vent to atmosphere or block it off
@AlBlacklock15 күн бұрын
your turbo identifies as a woman
@vtecminileonАй бұрын
This Chinese knock-off are pure shite inside the intake manifold. For anyone who's on a budget use an OEM one as they actually pickup more power
@melvingualdarrama8874Ай бұрын
Hey I know you said your thinking about selling some of the things your making up yourself but I was wondering if you would be willing to help me on a few things I need for my eg hatchback Build?
@damonrynАй бұрын
What do you need
@melvingualdarrama8874Ай бұрын
I'm looking for a set of headlights with the city lights And the stanley clear corners
@damonrynАй бұрын
@@melvingualdarrama8874 Im sorry mate i dont have that
@melvingualdarrama8874Ай бұрын
No I understand that but would like be willing to look for it for me ill send you the money for you to be able to buy it and send it to me please money for your time
@MattJov7Ай бұрын
Another phenomenal video 👑❤️
@TURBOTRISTOАй бұрын
IVE GOT SOME 1150CC RACEWORKS INJECTORS I CAN SELL YOU CHEAP IF YOU WANT THEY JUST CAME OUT OF MY TURBO K24
@damonrynАй бұрын
I’ve already got 1000cc ones, but thanks bro
@TURBOTRISTOАй бұрын
FIRST COMMENT
@Adam_Bap.2 ай бұрын
I just picked me up a k for the eg, found this page just in time😎
@damonryn2 ай бұрын
Good luck with the build, let me know if you need any videos or pictures etc
@dirkdiggler33152 ай бұрын
theyre skunk 2 manifold without the badge. s2 will buy them thro the badge on and resell it
@dirkdiggler33152 ай бұрын
its all from china
@ZuneWho3 ай бұрын
yeee mateeee
@jasonlinnell15753 ай бұрын
Good sh!t. I just bought a k24a3 & 6spd for my dc4. Researching/collecting parts. Def be following this build. Cheers ✌️😎
@damonryn3 ай бұрын
Appreciate it brother, happy to help with any questions too
@alomechanthasinh40793 ай бұрын
Found your channel. I subbed
@damonryn3 ай бұрын
Appreciate it brother
@Nicatlotus3 ай бұрын
seems like that oil drain is going up hill. Will that drain correctly?
@damonryn3 ай бұрын
It’s on a down hill but not by much
@MattJov73 ай бұрын
Mekanik 👑
@zundeadz3 ай бұрын
Planning on doing all the Same. Good simplicity and not too much safety 🤭👍 cheers from Belgium
@damonryn3 ай бұрын
Glad I could help out 👍
@revnation.4733 ай бұрын
Am a New subscriber love what you do man looking forward for more videos
@damonryn3 ай бұрын
Appreciate it a lot, much love
@TURBOTRISTO3 ай бұрын
Good work man keep grinding
@damonryn3 ай бұрын
Thanks again Tristan
@WohsGarage3 ай бұрын
you got yourself a new sub man. I might be doing something just like this very soon so this was helpful.
@damonryn3 ай бұрын
Thank you, lemme know if you have any questions with anything in the future, happy to help
@TheFixerFlipper4 ай бұрын
Thanks for sharing looks halfway decent for what you pay!
@Chris-gs6rt4 ай бұрын
Love the Pink turbo Damo looks mint.
@damonryn4 ай бұрын
Thanks brother 🙏
@TURBOTRISTO4 ай бұрын
Good stuff dude, I understand working to a budget, but I wouldn’t run any of those fittings in my experience they almost always leak/wrap and you have to go out any buy them again but spend double for higher quality, remember the poor man pays twice, it’s better to save some cash and use a better quality part rather than just buy the cheapest part, that’s coming from someone that lived on home brand chicken noodles for nearly 10 years so trust me save a bit and use brand name injectors and fittings and boost control, last thing you want is a failed wastegate sending your pistons to outer space
@damonryn4 ай бұрын
Yeah I have spent good money on injectors. But yeah I know what you are saying with the untrusted waste gate. I’m still thinking of changing this out, but it’s extremely expensive. Seen a few other people run this wastegate and have no problems. I’ll see how I go
@damonryn4 ай бұрын
Thanks for the feedback Tristan, been watching your videos for a while and I saw you subscribed and I was really excited 🤝
@merdez7324 ай бұрын
hell yeah
@myrx24 ай бұрын
You would be shocked what they look like inside if you cut it open. They might look good from the outside but the casting on the inside is absolutely horrendous!
@damonryn4 ай бұрын
Yeah ok, I’m on a budget so got no choice
@myrx24 ай бұрын
@damonryn if you know someone who can tig alloy then cut the bottom open and clean the inside up with a die grinder then weld the section back on. Seen a video of a guy comparing one to a skunk manifold and wondered why it flowed so bad so cut it open to see why. The casting was so inconsistent. Dags everywhere. Wasnt to bad after he cleaned it up. He also milled the gasket surface cos it was warped real bad and leaked when he first bolted it on.
@moseseggmolesse64384 ай бұрын
did you say bull boost? Could u post a link to the part? thanks :)
@damonryn4 ай бұрын
yes Bullboost, here is the link, pick the shifter depending on the trans you have. bullboostperformance.com/pages/rapid-search-results?q=shifter&page=4
@moseseggmolesse64384 ай бұрын
did the maxpeedingrods shifter end up doing alright?@@damonryn
@damonryn4 ай бұрын
I haven’t got the car running and driving yet, but for what it is, seems alright. Only thing I worry about is how tight and close the shifting is. As you could miss a gear and blow things up. You could either go for a sloppy factory shifter or a tight short shifter like I did. Also people recommend an acuity shifter but they are more expensive. What gearbox do you have?
@damonryn4 ай бұрын
if you got any more questions about things, hmu on instagram @damonrynvis, and ill be happy to answer any questions and even send videos if needed
@TheJNALife7475 ай бұрын
nice work bro.🤜🏽🤛🏻💯🔥
@Givelasagna5 ай бұрын
Can you post links for the housings? I have a k24a and i want to remove the plastic thermostat. Thanks
@damonryn5 ай бұрын
If I have time this afternoon, I’ll send you the links, but you can pretty much find these anywhere. EBay do them, jackspania racing does it, and bullboost do them. Bullboost will generally be the cheapest
@guckielol5 ай бұрын
:D
@Moueez5 ай бұрын
How much mm i need to open the inyector hole?
@damonryn5 ай бұрын
I believe it’s a 14mm, the aluminium it quite grippy so watch out
@LeboWhat5 ай бұрын
Thank you for explaining! <3
@damonryn5 ай бұрын
Thanks pookie
@TheJNALife7475 ай бұрын
u got yourself a new sub bro
@damonryn5 ай бұрын
Appreciate it bro, new vid is gonna be up soon, much love homie 🤍
@TheJNALife7475 ай бұрын
🔥🔥
@miked98515 ай бұрын
TEFLON TAPE MIGHT BE A BETTER SOLUTION RATHER THAN USING GASKET MAKER
@damonryn5 ай бұрын
Yeah I know, I didn’t have any, so if it leaks I’ll switch over
@jonhromeo61085 ай бұрын
New sub here from Southern California 👌
@damonryn5 ай бұрын
Appreciate it bro, one day I’ll go there haha, keen to see your comments in the future 🤍
@user-rp1lq5je2s5 ай бұрын
My favorite car
@wilmerotero84125 ай бұрын
Stance
@Primo-idgaf5 ай бұрын
Smells like nutsack in there 😂
@gaelbrutus31435 ай бұрын
Hey man, met you in busso on Saturday and figured today I would watch your channel. Its actually really good and you should keep it up man🙌🏽❤️
@damonryn5 ай бұрын
Appreciate it bro, much love 🤍
@stevey_vb5 ай бұрын
Keep up the videos brother
@damonryn5 ай бұрын
Thanks bro, i appreciate it
@OhKeiLife6 ай бұрын
So some tips for like a Suzuki Carry 1996 Kei Truck? haha would love to upgrade the shifter!
@damonryn6 ай бұрын
I wouldn’t have a clue sorry haha
@archiehull44496 ай бұрын
Sitting at the deck watching this with the boys
@EK4rguy6 ай бұрын
Quality looks to the same as the S2 ultra street mani I got, ended up porting/polishing it to help remove the access material/casting marks left in the ports
@guckielol6 ай бұрын
awesome video brother, looks clean as !
@CL9k24a36 ай бұрын
When portin use 70 %alcohol and liquid hand soap mix. Makes porting way faster
@Chris-gs6rt6 ай бұрын
Looks great slowly coming along
@Chris-gs6rt6 ай бұрын
Looks so fuckin good Damo can't wait to see you post once it's up and running 😩.
@Chris-gs6rt7 ай бұрын
I'll import
@guckielol7 ай бұрын
so excited to see this on the road <3 love the videos
@jxke2227 ай бұрын
$1000? NAH KEEP IT MAN
@Dallas-on-ANDIAMO7 ай бұрын
It’s nice keep it. Don’t sell it people will say it’s dump ❤
@damonryn7 ай бұрын
Hahah, yeah I’ve just made this video as a joke, doing a build series on my channel so, but thanks 🤍
@archiehull44497 ай бұрын
The step by step process breakdowns are seriously appreciated since i have 0 clue whats going on 90% of the time, the extra efforts seriously pays off