What is an ideal gear ratio for a hilux on 37s?

You guys still in business? Been emailing an no response

Would be nice if you guys answer queries. Been contacting you guys and I gets no response!

Did you have the prime the fuel through the preline filter before Turning the car on?

Would the hotter outlet pipe from trans to the new heat exch/cooler be better to just have cable protection over it rather than wrap next to cool return hose and inside heat proof tubing?

What is the efficiency rating? 100%?

Hey there, this question comes out of a fear. Just bought a new ‘23 Tacoma v6 and put a trans cooler on it for towing. I mounted a cooler on it where ports were facing horizontally. Initially I plumbed the hot flowing into the cooler at the top and the cooled fluid going back to trans was coming out of bottom port. Wasn’t seeing any temp changes so I bought a bigger trans cooler and mounted it horizontally, but this time I put the hot in the bottom and cool out the top back to the trans because I read it eliminates air bubbles, etc.. it’s definitely cooling more now. My question is -> did I do any damage to trans on the first install or starve the trans of any fluid due to air bubbles? I thought it would work fine emulating the radiator. I’m just disappointed that I didn’t do it right the first time. And definitely didn’t want to damage my truck any. First new truck I ever bought. Thank you for your time if you get to answer this!

Does it work on a 2020 Hilux model with gasoline?

Why wouldn’t you run it through the factory heat exchanger too . I would. I’d try both ways and check trans temp . Unless the heat exchanger is prone to failure and getting coolant in the transmission then the bypass is essential.

Guys I just purchased a 2011 GU Patrol, the dealer has thrown on a brand new set of 35's, so I'm just trying to work out what diff gear set to move to from the 4.3 gears currently on it? I was initially looking at changing out the speedo pinion gear because it's thrown the speedo out by 10ks.

Howdy! I am in Melbourne and go prospecting, I get bogged, I am going to sell my 86 Hiace to get a mid 90's model (better for parts) I have been thinking about an Lsd. you may be a good starting point... after I get the van.

Is that a 1.9L dmax?

The filter goes after the factory filter you said before the factory filter. You didn't mention about the wiring in the kit.

Great vid. Did you install the water sensor kit for the pre-diesel filter?

Hello do you have gear ratio kit for a navara d23 for 35s ?

Nice to see young Alex is a dedicated Led Zep fan.

No gearing options as of yet??

Will it affect the intercooler? Or the radiator since it is partially covered?

Underrated video!! How many wingnuts do you see out there, with their giant tyres and strained gearboxes. They add engine tunes, snorkels and zorst; but none of that helps mechanical strain. Keeping engines within their operating rev ranges is a real science. It’s just a pity that it’s so expensive to change diffs that most punters out there just won’t bother.

Fits on hilux 85?

No abs?

Looks like a fake catch can. Why is the Man Hummel made in Germany logo is replaced with some AU patetnt?🤔

Why cant you cover off on how to top up the auto fluid??? Now I have to search more videos !

wow cool

Will this work with the 1.9 dmax? They have the same transmission as the 3.0.

Swaping a 8" toyota axle on my daily drifter chevy. Can i drift with one of this ?

Hey Nitro, howdy, love your work and vids, Tkx! & Wondering if you've had the opportunity to fit a DP Transchill to an MY22 MU-X? - The MY21 D-Max/BT-50 are 98% same as MY22 MU-X in the front chassis as well as the 4JJ3 engine and Asin tranny, and I'd like to know if this DP kit (for D-Max: TC645DPK) is totally same/suitable for an MY22 MU-X ? I contacted the DP guys and despite Isuzu's shared platform, got a generic "we do everything from scratch / needs 3D mapping / go (away) and watch our social media for updates" response and they do not list a Transchill for the MY22 MU-X. If your crew, or your colaborates, have done a tranny cooler for MY22 MU-X, I'd really value your opinion and experience. - Actually also have the exact same question re the DP Pre-line Plus and Provent kits too. Cheers.

Would fitting one of these kits affect warranty. Because you are bypassing the original cooler.

Maybe trucks are not build for tracks like that

Did i hear correctly Recommended interval of 5K to change pre filter?

Interesting how one of the main tasks of the vehicle is towing and you chose the worst dual cab ute on the market for towing… (coil sprung rear end)

Hey mate love the flares on the nav do you guys sell them or where did you get them from? Cheers

is this a necessary part to install for the new dmax?

Sorry, I dont get the hype about these types of bars. They are not a bull bar, they are a bumper bar replacement. If you want your ute to look great while cruising the local woolies, carpark, then they are perfect. But if you actually want some protection from animal strikes, forget it. There is a reason why "traditional" bull bars sit further from the vehicle and thats so when you hit something, the bar has room to move back on its mounts, absorbing the energy and protecting the rest of the vehicle. These types of bars dont afford that kind of protection. This isn't a criticism of Piak. The presenter actually tells the true @1:54 "Bumper off, bumper on" Having said that, if you're in the market for a little more protection that what the standard bumper affords, this look like a great alternative and a very easy swap. Some other brands require quite a bit of modification of bodywork, so this looks great in that regard and it does really suit the looks of the DMax

He sounds South African. :)

Was there any drilling to be done ? This looks ok ✅ as I’m in the hunt for one for my pro4x warrior coming in 2 weeks

Utemaster is a good one but I at overpriced, what’s your view in it all

Why is this necessary in the first place?

Available at all good 4x4 accessory suppliers

good bloke for sure

great I need some Landcruiser gears

sweet video! lots of information here

be great if some of the brisbane vendors would pull their fingers out and ring their customers to tell them their bar is in the country.

great video!

HI CAN YOU HELP ME PLEASE > What oil is suitable for manual gearbox for Isuzu D-Max 2021 ? In the owner's manual they say use SAE 15W40 engine oil But this oil is not suitable for gears in high temperature areas

Hi - you said you had a custom bracket made for mounting the oil cooler. Can I ask where you had the bracket made please? Also why did you have a custom bracket made? What is the difference between the custom one and the brackets that come with the kit? Thank you.

Hi -what ship did the installation - wouldn’t mind going to them

Any knowlage on fitting this kit to a UK navara with adblue relay box mounted where the direction plus needs to be fitted!? 🙄🤞

Glad to see the stock