No it doesn't not really. I got one solder point on a capacitor. The other one was being a murphy. Pretty sure I bricked the board. Wasted 105 bucks oh well.

Zoom feature or not

Thank you, I have one where the plugs failed, so i grabbed a metal box, receptacle and some wiring to just pigtail it to the output, but bypassing everything in the box due to crappy wiring and solders I got confused on what wire goes where and hooked up the wiper to the neutral input instead of output only. i powered it with a switch on the power to it, (smartest thing i did so far lol) It buzzed and smoked a little then i flipped it off. guess i wore that brush down a little. I knew it had to be something stupid on my end. Hard to find relevant info for these. all i needed to know were the basics of what goes where, YEL to Neutral Output only, front side of coil to input/ouput hot side. Side coil RED to neutral input. Here I go to fix it, hope this is right. Thanks again

I am wanting to do this but KiCad doesnt have my ESP32-WROOM-32 symbol. I am trying to learn this part of designing my own breakout boards. If this comment finds you, any help would be appreciated. Great work by the way!

tfw the only isolation in the isolationtransformer is the enamel and tape on the windings

i have a question should i buy it as my firs 3d printer ( and very good and nice vid :) )

In July 2024, California’s Right to Repair Act (SB 244) went into effect which I thought required these documents to be made available to repair shops? I wish it was standard practice to publish actual specifications of these devices without the hassle it is.

Have you tried flying the drone with gps disabled (ATTI mode)? It might be similar issue with snaptain sp7100 where gps unit is not isolated poorly and it appears to be repairable in some cases by isolating gps unit better. But I also have sp510 and find it extremely difficult to control, much harder than $10 E88 drone I got. It just shoots off in random direction even with GPS enabled and locked. I tried enabling ATTI mode, but then drone does not take off. But camera quality is very good! LOL

Cómo reparar el cabezal

I get an error clicking on your code link.

what is the inside diameter of the hose if i may ask, i cant find it on their website

Notice he starts putting the gantry on the wrong way then magically it flips to the correct way LOL.

The link you have provided on Amazon is for a 50Hz unit, which is not designed for the USA market, which runs on 60Hz.

watched till end

this only last 3 months continous use every other day of use ,,,,,the controller board burn out

will it still do without the paste thing?

Don't you have like a crumb of Cobalt 60

Kalo di toko offline di mana ya beli nya?

I came here as a new viewer to say that your camera work is incredible. Keep up the great work!

since this is the tenth video of the same thing: drag file, unplug and replug WITHOUT PUSHING BOOTSEL.

Though this is 4 years old the picture quality is good. I moved to a town house and noticing some of the vents don't flow as much I started looking down in them and found stuff. It would be interesting to get one of those cameras and see what is in them. I just know the AC coils will need cleaned. This place had no one in it for 2 years aside from maybe the previous owner checking up on it to make sure nothing has gone wrong. Depending on what I find I may need to try to hook it and pull it out. I already found a bag that had cookies in it down one and a piece of insulation and some nails in another. It is obvious to me now that whoever built this place focused on speed and they just swept the floor debris down the vents thinking no one would find it. Well I did. I am not overly upset as long as it won't cost me a fortune to fix their negligence but it is still disgusting. I wish I knew a wood worker to get to bring his dust collector over and hook it to the vents one by one and see what it pulls out. A dust collector is like a shop vac but much more powerful and even has a larger hose and are designed to pull a TON more air flow than any regular vacuum can! I may get one of those cameras you have. I am only looking at reviews because many of these are Chinese generic junk and thus a waste of money. It would be nice to get something that can take photos too so I can show the neighbors. Next thing you know they will want to borrow the camera and look inside their disgusting vents. Maybe they have a similar problem where the airflow is not so strong on the second floor too! I hope when I snake a camera down in there I find some money (we can all dream).

Creative video, thank you :)

After watching this, I wouldn’t trust these without a multi meter.

I'll get you onto making costume jewellery..

Instead of using a mechanical keyboard, try the microsoft ergo keyboard. Your wrists (and wallet) will thank you.

Did you test them with a small load to get a current flowing? Because the open circuit voltage of a Battery, is no good indicator of its charging level, can be misleading.

This has to be a misprint, Duraleak's always leak after 1 - 2 years

USA vs Chinna

Bunny power 😂

them ant the same

What voltage remained? Even Duracell posts an expiration date on each battery.

Check out duracell’s ad from the same period. They mention that it runs and lasts and lasts

I have some 2004 Duracell d cells that were in a flashlight that are at 1.4

even if they are not in perfectly changed condition, just recharge it, do it with all batteries regardless if rechargeable or not

lol fuck Duracell I had batteries kill my devices with leaks or batteries leaking in the package bought the day before. No thanks I’ll stick to energizer.

Wow 😂😂

Can't say for current time It's leaking like anything 😞

My rechargeable in my remote from 1999 🤣🤣🤣

That's impressive. I've had batteries that were just a few months old in a scale. One week the scale worked, next week it didn't. When I opened it up to replace the batteries they had started leaking

That's 100% on the circuit design. Batteries only leak if the circuit is continuously pulling power out.

How do you fix those joint for the brake lights and interior lights?

Can’t believe this! One time i bought some Duracell triple-A batteries in Denmark, and they were leaking out if the box! Steered very clear from anything Duracell ever since.

I have been using it for over six months, and it is such a handy tool to have on the workbench. To measure low values accurately, I wipe the tips and run the calibration and thereafter the reading gets more accurate.

Also a testament to the device design. A lot of modern electronics kill batteries when not in use.

Do it work with a rotator ?

Nice to see. Thanks Eric.

I’ve never had an issue with charged/mostly charged batteries leaking, it’s always the close to dead ones that start leaking

Duracell has always had the best AA Batteries 😂 They last forever on Tv temotes.

thankyyou i can now fix my guitar

Nice this 100% fixed my issue. Thank you so much.