Tim Tuimaseve

Пікірлер

@usuariouser224 11 ай бұрын

Speed?

@chrisr.986 Жыл бұрын

I think my timing chain is going out what were the symptoms before going out?

@AzraelPercussionNEO 3 жыл бұрын

Interesting you didn't have to cherry pick the engine out. How did you manage to get all of those Pullies out to gere to the Timing Chain Case?

@Dripset_Tee Жыл бұрын

Ik this late lol but you just remove the motor mount on that side and lift it up some and remove the 3 pulleys in the way

@kytomni5374 3 жыл бұрын

What was the torque specs for the engine motor mount

@zijie-he 4 жыл бұрын

85k KM for a chain replacement seems quite less than my expectation. Do you happen to know why the chain got stretched so quickly?

@lcameeno1 2 жыл бұрын

Yeah the 08 to 10 evo x had a weak timing chain that would stretch, the new updated one will last a hell of alot longer if not the whole life of the car unless you run stupid amounts of boost but even then it will take that abuse lol

@yungsteazy 4 жыл бұрын

The dealer told me they no longer use the top guide and too do the oil pump chain while your down there

@yooitszen4998 5 жыл бұрын

How did you torque the crank shaft pulley bolt?

@Motagraphy 4 жыл бұрын

Yoo Itszen did you figure out how to do it? Lol I’m stuck

@4bvenom733 5 жыл бұрын

So why did you have to replace the chain j.w

@92clintonr 5 жыл бұрын

Because he got a fault code of p00012

@diegoolalde1341 5 жыл бұрын

Did the timing chain and its all good but now i got 2 p0017 codes and idk what it is

@jouseyjunior8874 5 жыл бұрын

Diego Olalde you ever found the fix for that? You probably messed the timing up, at least thats what i looked for

@kylebarry6520 5 жыл бұрын

Didn't look like to much time was spent cleaning surfaces and without dropping oil pan i suspect future leaks you working flate rate lol !

@pois3d 6 жыл бұрын

Is it necessary to replace the timing chain plastic guides?

@TimTuimaseve 6 жыл бұрын

samuelrodriguezdj it came with the new timing chain so just did it anyway :)

@VincentS327 6 жыл бұрын

great video, was hoping to see a lil more on installing serpentine belt install as well lol

@vitalijjurt8107 6 жыл бұрын

How to clean and change gears on the vanoses?

@vitalijjurt8107 6 жыл бұрын

Do you have a scheme of the marks, how they should be at the chain installation including marks of the counter balancer chain?

@TimTuimaseve 6 жыл бұрын

vitalij jurt there is another video on youtube somewhere where a mitsubishi expert shows you how to line the markings up.

@yuvarajahyuvarajah1754 6 жыл бұрын

Is it need to change timing chain and how many miles need to change?

@Brinrex 7 жыл бұрын

Will this be the same for a 11 ralliart

@TimTuimaseve 7 жыл бұрын

Yes, I think the ralliart has the 4b11 engine.

@abrrf7519 7 жыл бұрын

mines at Mitsubishi getting a new chain and waterpump replaced this week, evo withdrawal. can't wait to get her back 🙄

@AndyGor1688 7 жыл бұрын

hello there, i have a requestion. doesnt resetting the relearn value require a mut iii tool ? what is that fuse for? does it have the same result as pulling that fuse out andput it back in vs using mut iii? thanks , this is a great video. i am about to do this job my self as well. every input would be helpful

@TimTuimaseve 7 жыл бұрын

sorry for the late response. Havent used this account for a while. There is a difference. I found when pulling the fuse the error would come back. When I took it to the mitsubishi dealer they reset it for free and it has not come back since.

@mcnichristian 8 жыл бұрын

i did everything other than change the tensioner it was still pretty strong

@TimTuimaseve 7 жыл бұрын

Nice work!

@mcnichristian 8 жыл бұрын

so i just did this yesterday but when the chain is on there i spun the crack twice like the other tutorial said to but i got confused when i looked at the timing marks and they weren't in the same spot is that normal or should they be in the same stop every time after a turn or two

@TimTuimaseve 7 жыл бұрын

They will be at different spots with every turn. I guess because the crank sprocket is a different size so you would need a few more turns to eventually get the marks to line up again. The other video you saw was probably telling you to turn it by hand to check for interference between the piston and the valve.

@ZnkCt 8 жыл бұрын

can you do more evo videos?

@TimTuimaseve 7 жыл бұрын

sorry for the late response. Unfortunately I sold the evo last year :(

@EvoXalex 8 жыл бұрын

Nice tutorial man ! :) I just got the dreaded triangle myself. I'm gonna order the parts and try to do it myself too, since the stealership is just damn too expansive. Mind if I trouble you with a few questions along the way !? Cheers !

@TimTuimaseve 7 жыл бұрын

Sorry for the late reply. I sold my evo x a while back and havent used this account for a while. Hopefully all went well with your timing chain.