is it not necessary to loosen the screws? that seems unlikely
@GarageDoorGuidance6 сағат бұрын
If you watched the video it might make sense
@AlanTeague-eu5kv2 күн бұрын
Excellent video. Wish all DIY videos were this succinct, clear, and complete.
@GarageDoorGuidance2 күн бұрын
Appreciate the feedback
@alikamil40612 күн бұрын
You number one thanks ❤❤❤❤❤
@natehorne61093 күн бұрын
Easy-Peasy, worked Perfectly! THX
@brucehayes51113 күн бұрын
The black rectangular button is not lit up at all. What could be the issue there?
@GarageDoorGuidance3 күн бұрын
Everything else is working fine?
@brucehayes51113 күн бұрын
@@GarageDoorGuidance No, nothing but I did a little digging and found out that it is a MyQ but no wifi on this model. I think there's another app that I might can use for this particular one. Thanks for your response!!
@GarageDoorGuidance3 күн бұрын
@@brucehayes5111 you’ll need the internet gateway or wifi adapter in that case
@Yandel_Garcia5 күн бұрын
How much should the gap between the verticals rail and the edge of the panels?
@GarageDoorGuidance5 күн бұрын
It changes at it goes up
@Yandel_Garcia5 күн бұрын
@@GarageDoorGuidance gotcha, is their like a general rule of thumb I must follow?
@benda777nba6 күн бұрын
Yes i had some garage door repairman come out and said it'd be 400 bucks to fix which as a teacher Iw as like um no not right now....I figured I can just pull it up and down, but this looks easy enought but I'm wary about the wires; could i have an electrican fix this for me who won't charge me taht much?
@GarageDoorGuidance6 күн бұрын
Those wires are low voltage I don’t think you need an electrician but you can call and ask or call a couple different companies to try to find an honest one that’ll charge $100
@YHWHMission6 күн бұрын
Thank you! Good video!
@tammy11907 күн бұрын
Thank you
@Irizar64899 күн бұрын
Life saver man! Thanks!
@Tony-bp1nr12 күн бұрын
After I set the limits on the garage door opener, is it going to require me reprogram the keypad and the remotes?
@GarageDoorGuidance12 күн бұрын
No
@isaachurtado395713 күн бұрын
Good shit, the hardest thing for me was finding a pulley stopper
@christophergibbs162013 күн бұрын
Thanks a lot for the video…. Saved me a lot of $$$$$
@PeterVieth13 күн бұрын
Shortest description of how to make this work that I’ve seen. Thanks!
@GarageDoorGuidance13 күн бұрын
That was the goal 🫡
@timothylind360315 күн бұрын
You are awesome for sharing this thank you
@scorpionking342716 күн бұрын
Thank you so much sir🙏🙏🙏
@eleazarcassis287016 күн бұрын
can you use a taller chain ? same pitch and link length, just taller than the original part
@GarageDoorGuidance16 күн бұрын
If I had to guess it may slip off the chain but could be wrong
@aaronflanagan898318 күн бұрын
This is necessary before removing brackets. Ask my mangled hand.
@GarageDoorGuidance18 күн бұрын
😬😮💨
@BobbyLackey-is9nf18 күн бұрын
Fantastic news about the beeping 👍 We thought at first it was coming from our car🤦🏼♂️ Thanks!!!
@obione702218 күн бұрын
It help me so much for a first timer to replace my garage door.
@Shane-sl6ql20 күн бұрын
So after you press both remote and the device button, only your remote opens the door and the one that was lost doesn’t. Thanks for a great tutorial 👌😍🙏🏻
@KbB-kz9qp21 күн бұрын
Thank you sir! Very helpful 😀
@jimmywalker2221 күн бұрын
It was my bulbs! Thanks for the video!
@janetayala503922 күн бұрын
Does this device on the wall require batteries? Or is it plugged from behind?
@GarageDoorGuidance22 күн бұрын
Usually hard wired to your opener
@aplangefeld23 күн бұрын
Thanks for talking about the gear.
@DAMCOOLDAV23 күн бұрын
Help! I used the pliers to hold the door at the highest point, loosened the set screws, and wound it up and reattached to the door (both sides), but when I finished the 2nd side, it completely unwound itself when I let go even though everything was back to normal. What am I missing?
@GarageDoorGuidance21 күн бұрын
Sorry Dav, I think I know what you did but I can’t advise safely from here
@DAMCOOLDAV21 күн бұрын
@@GarageDoorGuidance I ended up calling my garage door company, they came out and Immediately saw what happened. My spring was broke in 2, luckily they were able to fix right away, $400 :(
@GarageDoorGuidance21 күн бұрын
@@DAMCOOLDAV gotcha, $400 is about right for a 2 spring setup ( depending where you are ) glad its squared away
@Ambrizfamof325 күн бұрын
Thank you so much!! You saved us a giant stress and money. Totally worked for us and now we don't have to worry about it. I appreciate you
@MSophia625 күн бұрын
Thank you so much! This saved my whole Saturday.
@FedericoFraccaroli26 күн бұрын
All good but the annoying music
@aperson112228 күн бұрын
I have Chamberlain (B2215T), look exact the same as this one. I am having problem of setting up travel limit. Followed all steps but at the test cycle, it goes up fine but not going down. So frustrated.
@GarageDoorGuidance28 күн бұрын
I’d recommend calling chamberlain at that point, I suspect RPM sensor or logic board possibly
@aperson112228 күн бұрын
I wanted to update my problem for other readers. It's solved. After two days getting crazy: sensors aligned but still got the code 4-6 (4 up - 6 down). Over Chamberlain web site, the 4-6 code says checking the sensors alignment, make sure the wires install correctly on the Opener....and I did. Found out the problem was I replaced the old wires of the sensors but not the one connects to the remote. Replaced that one and now it's fine.
@splash597429 күн бұрын
Do you have to count the turns, so when your ready to reinstall, you get it to function the way it did originally?
@GarageDoorGuidance29 күн бұрын
Yes that’s correct
@josemunguia7229Ай бұрын
Thanks I appreciate it really
@johnvincent4928Ай бұрын
Great job. Very well done. I wish more instructional videos were made this well. Thanks.
@xianli6488Ай бұрын
If my chamberlain garage door cant open and close with both controls during chilly- hot forecast is this the priblem or garage door sensors because i saw there are some webs/ dust might beed checking as state online?
@GarageDoorGuidanceАй бұрын
Do you happen to have a screw drive opener?
@xianli6488Ай бұрын
Is it to open the garage door opener to determine if the control board is baD?
@merrilljohn1619Ай бұрын
Thank you very much for your clear instructions. Thank you for your very clear instructions. You helped a stupid man make good. That's all we need, just a little help.
@lcrusselljrАй бұрын
Thank you for the overview, I didn't realize there were three types of hinges.
@John-lm1zgАй бұрын
Thank you for your help, God Bless!
@josemoreno3334Ай бұрын
Thanks , My problem is solved . It opens and closes like a charm.😀👍
@chihuahuaverde425Ай бұрын
Thank you! Was tightening mine in a different order, causing my cables to birds nest. I did in your order and no issues.
@carlospatelАй бұрын
Thank you very much! I fixed this problem after watching your video and cost me only $30. I really appreciate your work
@CarmelaPalmerАй бұрын
I'll add my thanks also. Quick and easy. When I finished hooking up the replacement, I noticed that flashing green light at the top right and didn't know what to do. Reviewing your video again, I see that same blinking light as you button the system back. I think I'm good to go and thanks again.
@GarageDoorGuidanceАй бұрын
I believe this signals “charging”, happy to help!
@denny9440Ай бұрын
haha and then he opens the door and there is no hole behind the door 😂😂😂
@GarageDoorGuidanceАй бұрын
Magic 😂
@tnguyenfrАй бұрын
MY GARAGE IS FLASHING RED IS NOT GOING UP OR DOWN HOW TO FIX THIS CAN i RESET
@GarageDoorGuidanceАй бұрын
Did you try these steps? Unplug and plug it back in too
@donovanfowler36Ай бұрын
You just saved my marriage, I had a 5 minute job replacing the rollers on the door and some how messed it up enough to have to redo the whole thing. Luckily I found this video and it helped me tremendously, thank you!
@johngatsby1473Ай бұрын
Ive got a weird situation. I have a triplex and they all have the exact doors except the spring. One of them has 2 springs and one of the others only has one yet it works great. I got the darn door aligned amd was able to hand lift it but all the wiring popped off one side. Im assuming i need to let off some spring pressure? I did adjust it because both springs were loose as if they had no tension so i turned them both 15 quarter turns.
@GarageDoorGuidanceАй бұрын
Hey John, hard to direct you without knowing exactly how it sits right now to be honest and I wouldn’t want to direct you incorrectly and cause injury ! What I can say is that a fully tensioned spring is right about 30 quarter turns for a 7’ high door. It should stay at open at halfway without dropping down hard or flying open signaling correct tension
@jonathansingleton8318Ай бұрын
All the videos and this is the one that saved my ass quality video right here
@GarageDoorGuidanceАй бұрын
Glad to hear it!
@johngatsby1473Ай бұрын
It's amazing how easy this crap is and these clowns are over here trying to to charge 125.00 to come do this.
@GarageDoorGuidanceАй бұрын
Respectfully $125 is very fair haha most guys won’t even come out for less than $100 where we’re at as it hardly covers costs
@ericmolina7945Ай бұрын
I was able to fix my garage. Very clear instructions!