Good way to relax & enjoy watching the fire in tiny wood stove. Bet its great in the winter time too😊

Doing ok, problems with the back& legs. Hope everyone is doing well, just leave message to say hello,& let y'all know missing you. Enjoy your summer and keep cool 😎

Folding into 3 rings is easy peasy - how do fold a blade into 5 rings which I got when I ordered a large 111" bandsaw blade?

acetone is used in most if not all fuel blends and paint thinners as a stabilizers it also thinnes the used oil

Question...connecting to the terminal block instead of the regular plug in sockets...do u get more watts out of it?

Awesome video I learned a lot from this! Very thorough and fun to watch!

Chains can help

My only issue is the propane tank. Doesn’t it emit toxic fumes being used indoors?

If this type of inverter produces voltage between the neutral and ground terminals, then it seems to me that voltage could be detected on the frame of your RV. Have you used a Fluke VoltAlert non-contact voltage testing pen (or similar product) to test if current is flowing to the frame or outside metal skin of your RV?

Awesome, so easy this way

I know this is a couple years old but please do not disconnect ground first when working with AC power. DC power = remove ground first, AC Power = remove hot first.

very elegant way, thanks

I just watched your videos on gauge clusters. Thanks. I subscribed! Then I see you have a claw foot tub! I have a red one in my Skoolie 😃

I’m so excited. Thank you for helping! I’ll let you know how it goes. I have 2004 International Skoolie. You gave me confidence! Thank you! 😊

You make this look easy! You are giving me confidence to do this! I am excited. This is an informative video! Thank you!

Fantastic video👍👍

I notice that your countertop is above the bottom window frame by about 4 inches ? What if one of the windows is severly damaged from outside, how will you remove the damaged window frame with the edge of the countertop backsplash being in the way ?

Not fair lads didn't get one, wyatt wanted that she grabbed it👎👎

Pillick

Shouldn't be on her phone driving, not good for younger one's to see

If you want to add a rear deck but don’t want it sticking out as you drive down the road, why not build one that has hinges where it attaches so when you’re ready to go, just fold it up against the back door & latch it in securely in place?

Why they allow cars like that on the road?

This isnt sharping its tooth setting

Never seen anyone talk non-stop about nothing.

Well I thought I would watch him wire a switch. He missing something upstairs 😊

Hello I'm having trouble with my rpm and mph. My rpm is not moving at all and my mph is 10 miles ahead of what the real speed any idea

What size regular

Good video, thanks. Just wished you gave a mention to the battery size and info for eventual replacement while you were in there. Good explanation!

I bought a new fuse box and pin connector, rewired it and it worked beautifully, a year later it did it again. Don't know what to do anymore. I'm thinking of rewiring it to an external fan relay and seeing what happens. If anyone has done that before, mentor me 🙏 please!!. Thinking it's very possible. However, don't know if it will mess anything up if I do it 😮 🤔

I have essentially done the same thing you did last year. Bought a new fuse box from the dealership, new connector and repinned wires. Worked beautifully. However, melted pins again a year later just now.I'm thinking of rewiring it to an external fan relay and seeing what happens. If anyone has done that before, mentor me 🙏 please!!. Thinking it's very possible. However, don't know if it will mess anything up if I do it 😮 🤔

My cigarette lighter and outlets arent working

I have the same issue. I just ordered the fuses. I’m hoping I can run my Cpap off this for at least 5 hrs. Hoping to use it while camping.

Thanks!

Go with inside sanding

Great explaining

Much easier than pushing/letting off the throttle and adjusting the cable Thanks!

Awesome video! Cant wait to join the skoolie movement. Should of bought a bus sooner

It would cause engine fan to pull too mucn

I know this was a couple years ago I havent seen any other f/u video. However, did you check connecter plug to your fan? There are 4 spots in plug but only 3 needed. Maybe one of them burnt?! If so, theres an extra core in the plug, has piggy tail on it. Remove bad core and replace. Im so curious as to what the problem was

Very useful video 👍 thank you for that.

Aluminum dust is probably why this isn't commonly done. A 20 sheet paper shredder from the goodwill, would keep up with family supply of cans. And if you got a cement mixer and a torch, a bunch of the plastic can be burnt off, lessening dross in the crucible later on.

The 120 volt receptacle in this unit has green ground wire. Where does this ground to?

Every one of those teeth have been heated and blued so now have no hardness left

Thanks for the tutorial. What mill do you use?

Why does it only power anything while on charge and power outlet and the electric outlet and air compressor not at all

Nice set up. Wandering did you constructed trailer - set of wheels are positioned to far behind so weight of the load is not properly distributed - most of weight is on the towing hook which is wrong and dangerous!

Matthewgeorgeintelsellokpay😅😅😅😅😅😅

Matthewgeorgemonthpayok😅😅😅😅😅😅😅😅😅

Been using these blades for several years really happy with the life I get out of them. I did move up to the 1.5" blades on my Woodlands Mills 126

CHILD MOLESTER. SERVING 3 LIFE SENTENCES. A REAL POS