Hi, first of all, we thank you for the information you give through your videos 👏🏼🙏🏼. I wanted to ask you a question, I have two GX 270 pressure machines and I would like to increase the gpm! What a treat, can you recommend that I work with Gx 270 to increase the highest gpm. I appreciate your help.

"...Compresses the water"? You don't know what you're talking about. Liquids cannot be compressed except for just a tiny, unnoticeable bit with some exceptionally strong equipment!

390sayleshonche

I have a new home owner model that is 3000psi 2.5gpm and the second time i used it it pressurized for 10 seconds then stopped. The motor still runs and i made sure never to let it run more than a few seconds without pulling the trigger to keep the pump cool. Any ideas why the pump is not coming on? I already checked the unloader valve and it is not stuck. I am at a loss.

what type of oil do you use in the water pump and is there gear oil on the gx390???

Hey bud, mine didn't come with bolts to mount the box to the engine. Do you know what size bolts you used to mount the reduction box to the gx390?

So i have the honda gx390 i want to get this 5.5gpm pump and gear box i see rw5535 pump with reduction box is this the same

Hello brother can you tell me please how long can run pressure washers continuously and also tell me how much life span of pressure washers

how many of those buckets would you go through to wash a typical 3 bedroom house?

I have a brand new PA gun that the wand fitting is cracked , it looks like the fitting pipe would unthread but I am not sure and if I could get a replacement part .You didn't show how you removed the pie fittings , I feel like it is going to break

whats the link to this gearbox?

informative, thanks

God bless you mate.

you say 250 is the minimum, what would a $250 job look like?

what do you guys do when roof washing where people catch rainwater for drinking? how do you stop the chemical from entering the tanks?cheers

When I put load on my pressure washer the crank won't turn.

Hey man thanks for the video, quick question is it cheaper to do this whole build yourself? Or if I bought a prebuilt already assembled with the gx390 is it similar in price. How much am I really saving if I decide to build my own?

Can you add a link or info on the pump you used.?

Picked up an old washer after my new brushless monster died in like 40 minutes... defeated the purpose of low maintenance lol. Started looking for pump/chassis as a priority- hoping to find one that didn't run, could swap motor out if needed, still gets me way under cost of new. So for $150 got an older Italian HyPro with a Honda G400 (old 11hp flathead) built in gear reduction (not sure what the reduction is, I'm guessing 2:1 based on pump rpm/motor rpm) 4.7gpm 1800psi. Lower pressure but great volume (which frankly for most of what I do, this is a better setup, especially since I'd like to run a small wet media blaster sometimes.) My question is, can I bring down the orifice sizes some to get more pressure and sacrifice some flow? The thing is beefy, I don't imagine it'd be a problem as long as the motor can chug through. Have you ever used a small diesel on a pressure washer? Too much noise/harmonics? Because a belt drive on a small diesel may actually work really well. The small 6hp 196 diesels probably make a lot more torque under load, could run only a slight underdrive on the pump side. Would running it at slightly more rpm increase pressure at all? Or just flow? Pressure being a result of flow through certain passage/orifice sizes?

Thanks, very informative for me. I have a small 2700 psi pressure washer. After a long period of time i go to use it & water will not come thru the pump. Do i need another head?

Hey wash right can you use janola bleech to wash your house??

Very nice setup. Few questions. First is the battery placement, could the battery be mounted under the tray somewhere? Second is regarding the chemical injector remote bypass. What do you do when you remotely switch to water but the ball valve on the pump unloader bypass is set to chemical.? Will the Chem tank not fill up with water? And I assume this system only works with batch mixing? Is there any way you could run the stainless steel pump with a proportioner setup? The problem I see is the pump bypass. And regarding the floodlights, will are the floodlights connected to the chemical remote bypass as an indicator?

love the every evolving design guys.

Nice. That’s smart with the petrol, I have to use 2 different pumps every time I fill up 😂 I’ve got the same set up from Spray away. It’s a game changer. So good.

Very nice setup mate👍 and thank you for sharing your setup. The LDV here in Australia they have a very high cab what model LDV you have thank you Nathan

Great to see you back making videos. Thanks for sharing 👍

u are corect.... any one wourth a damm will add trucks and crew i just wonder who was the guru asking for images ? some snake oil sales mans we have now

Hey mate once you have set up the new softwash pump can you please do a video I am interested in the setup. I have been thinking of trying something different. I like the sound of the setup you are putting together it sounds like it’s a lot easier than the setup out there other people are using. I run a hawk pump and It has never let me down yet. Thank you Nathan

Yes we have them here in Australia 🇦🇺 if it’s a Automatic please be aware . I have a mate that has the LDV VAN and has had a lot of issues with the Automatic. Just thought I would let you know.

Good to see you again haven’t seen you in a while mate 👍

Very cool new set up Troy. Nice work man! Just a quick question - how many metres of hose can you get on the Hulena hose reels? They are epic and I may need to invest in one! I’m looking forward to the next video. Cheers.

Good to see a new video, looking forward to the build. What cameras did you go with and are they wireless or wired? Thanks!!

Do you guys ever fill the reduction box with gear oil before mounting it to the engine and notice that it slowly leaks oil out of the spot where the engine shaft will insert??? ... I've had two reduction boxes (Both Brand New and Exactly the same type as you have in this video) and BOTH have begun leaking oil. Does it seal better once the engine is mounted to the reduction box? This is really freaking me out.

Hey bro, im actually in the process of starting my own small water blasting business and I was wondering if I can come down to your Hamilton office and grab a few tips???

Hi Troy its fantastic to see how your business has grown in such a short time 👌 I'm looking to get some advice as I'm a newbie in the industry with previous experience working for other companies I'm looking at the BAR 3000/21LPM $3600 machine what's your opinion on this machine and do you have any other recommendations keep up the good 👍 Michael.

Of course horse shit music..

Where do you get your reduction box , to upgrade to your 5.5 gal pump?

Excellent video, thank you for helping me prepare for a new line of work 👍

Hey was wondering does this working on wood houses, and is there a soap you would recommend buying?? Preferably ingredients from a mitre10 or new world, Im from Opotiki bro and just come back to the house looking mouldy and dirty everywhere.(cousins still running they're business from they're car that's why lol) hoping to revive this place this year though, hoping to hear back.. love the video bro 👍

I go with the Chinese copy engines. Probably made in the same factory as the Honda

Do you use the clients water or do you have your own water tank?

Would this setup work if you wanted the pump set up using a reduction box in opposite configuration with the same pump but with the pumps shaft on the left side instead of the right like the one u have here?

Is that net profit? Or is that what you gross? Great effort!

Thank you for sharing this

What anti rust chemical do you use for filling pressure pump on storage?

Good business

if the sahft of the pump is driven on the opossite direction. It will still produce pressure?

That pump and gear box isn't too heavy to run on that block without support???

Hey Troy need a new pump on my gx390 and being gear drive with an internal unloaded I’d like to upgrade to at least a reduction gear driven 5gpm pump and external unloaded. would you be able to point me in the right direction to buying the correct unloaders and reduction boxes ?

these videos are really informative man. i really appreciate the help. im a new aussie buisness and i watch all of your videos for help and tips. thank you.