What mods on the sho i just got mine and want this type of power
@KenKyleRacing8 күн бұрын
@@jeremyj3893 downpipes, hpfp, intercooler and intake
@jeremyj38938 күн бұрын
@KenKyleRacing the hpfp is to rune e30 right? If I was just planning on doing a 93 tune what mods should I do to make good power
@KenKyleRacing8 күн бұрын
Intercooler intake and downpipes
@jeremyj38938 күн бұрын
@@KenKyleRacing thank you
@jeremyj38938 күн бұрын
@KenKyleRacing sorry bro one last question, can I get the GH power package and tune before getting a downpipe and intercooler
@Freddy_Confetti8 күн бұрын
Knew it would be a race like this lol
@sarahcarpenter72709 күн бұрын
Ken it would be nice if you would answer their questions, cause using the juice bottles is a great idea,but how long will it last without being sealed ? I’ll keep sealing mine in mason jars knowing it will last longer when kept in a dark cool place .
@KenKyleRacing9 күн бұрын
@sarahcarpenter7270 i have no idea. I leave mine in refrigerator and it's usually gone within a week.
@kevinhuff200411 күн бұрын
How do you change the regulator
@KenKyleRacing11 күн бұрын
@kevinhuff2004 no idea, haven't dug that far into it, but if window is stuck in down position it's fairly common issue caused by a faulty driver door window switch.
@XpolrerST14 күн бұрын
Im back to find out your launch secret lol
@KenKyleRacing14 күн бұрын
It's no secret, been telling people in the Facebook groups for two years.
@dm.202317 күн бұрын
Seriously??!!
@dmndbiggestfan260518 күн бұрын
Dang things quick
@SirtubalotTX19 күн бұрын
Stock tune on the 3.5t? Your ST runs about what my N54 did with stock turbos Stage 2+ but my trap was closer to 120 and flirted with 200 on the top end. lol I'm impressed with these Sts, they are now on my list for SUV duty.
@KenKyleRacing19 күн бұрын
@SirtubalotTX other explorer had a base tune but no other mods
@jstinn12320 күн бұрын
For a printer with Event Code 13.10.14 but no actual paper jam, I took it apart to be sure and found nothing. Do you have experience with that error code? its a MFP480.
@KenKyleRacing20 күн бұрын
@jstinn123 if it says jam but no paper jammed, it's usually the feed rollers
@jstinn12314 күн бұрын
@@KenKyleRacing I did find a fragment of paper above the fuser.
@KenKyleRacing14 күн бұрын
Fusers can also cause jamming issues. They're a little easier to swap than the transfer belt.
@852650922 күн бұрын
I have both
@andyfc111422 күн бұрын
Hey, did you ever post a video on how to add third row seats on these 2020+ models?
@KenKyleRacing22 күн бұрын
@andyfc1114 no but I know a guy that did. kzfaq.info/get/bejne/nK1jibZ_rZOdloE.htmlsi=awIzH-RnUACDu-Vy
@KenKyleRacing22 күн бұрын
@andyfc1114 oh wait you said 3rd row. What do you mean add a 3rd row? They come with a 3rd row.
@andyfc111422 күн бұрын
@@KenKyleRacing I guess I should’ve been more specific haha. I’m referring to adding third row on a Police Interceptor Utility
@KenKyleRacing22 күн бұрын
@andyfc1114 oh no clue don't have one of those. Might have to tap for screws or brace mlght use same holes, not sure. I'm sure it's doable tho
@razorman6523 күн бұрын
Take it to the strip , simple . OR ADD 1.3 SECS. SOMETHING
@KenKyleRacing23 күн бұрын
@@razorman65 tested it at 3 different drag strips
@Q-urn24 күн бұрын
Is the jeep was srt?
@KenKyleRacing24 күн бұрын
@Q-urn think it was just a regular one. Didn't get to talk to him afterwards.
@yaboyfranke937024 күн бұрын
Lmfaoooooooooooo i know this makes dodge people mad🤣🤣🤣🤣🤣
@adventurer418828 күн бұрын
Did you use step colder plugs?
@KenKyleRacing28 күн бұрын
@adventurer4188 yes i use the motorcraft GT plugs
@herpderp1662Ай бұрын
Eager to see my my ranger raptor can do once the tunes start dropping.
@gumballer133Ай бұрын
I see a modded Explorer ST running around my town, I'm sure eventually i will see him in one of my cars instead of my Dailys.
@zenonsouzajr1735Ай бұрын
Thank you so much. Nice video . 👏👏👏
@1slo4doorАй бұрын
You got played son! haha
@S8ERАй бұрын
pretty spicey GT. Would have been a great heads up race if you had left together.
@KenKyleRacingАй бұрын
@S8ER ya he was a lot quicker than i was expecting. Lol
@S8ERАй бұрын
@@KenKyleRacing I had that happen with a Roush. Didn’t see the badging and started slightly behind it. I couldn’t real it in at all and it was really quiet leaving me to think it was just a stock GT. I was very confused in the moment 😂
@KenKyleRacingАй бұрын
@S8ER lol! It happens. I talked to him later and found out he was supercharged and on full e85. What's funny is he said the best mod was upgraded torque converter, said it took 3 or 4 tenths off his time.
@PJesterАй бұрын
Awesome footage dude
@S8ERАй бұрын
Did you get a chance to talk to the guy? Looks like near stock with tire? You kept up better than I expected given he hooked up. Good race!
@KenKyleRacingАй бұрын
@S8ER no but he was an old guy, looked like maybe 75 or so. Those are always the guys ya gotta watch out for, as soon as i saw him strap on a helmet i knew it was trouble
@S8ERАй бұрын
@@KenKyleRacing he hustled that thing. 99% of the Hellcats I see just spin.
@KenKyleRacingАй бұрын
@S8ER ya i would have went on green if i thought he was gonna hook. Lol
@execlonАй бұрын
Good run!
@S8ERАй бұрын
@@KenKyleRacing 😂 yeah no kidding. it's usually a pretty safe bet they won't. Have to keep an eye on that guy though. lol
Side by side metropolitan passes is what we need !! :)
@f4phone104Ай бұрын
Got that job to do tomorrow so thanks. But what a pain. A fraction of a cent foam pad causing that much trouble. I remember an Oki Data machine with the same kind of failure but on a paper feed solenoid. So thanks again.
@KenKyleRacingАй бұрын
@f4phone104 pretty much every hp ever made has same issue with feed solenoids. Good for about 10 years then they stick.
@harrisonclark4382Ай бұрын
Man, wish you had a better road without poles.
@YaBoiDanАй бұрын
Thanks brother
@joelsims7239Ай бұрын
Very thorough. Funny hearing your voice after 20+ yrs.
@KenKyleRacingАй бұрын
@@joelsims7239 finally got my own anaconda honda!
@xxcowboyjamxxАй бұрын
Thanks 👍 for the instructional video Sir!
@victormatias8952Ай бұрын
I've already smoked a few Challenger R/T and Charger R/T in my 2014 SHO.
@ScottVajdakАй бұрын
Many thanks for taking the time and effort to post this walkthrough video with tips! Especially the part of ensuring that solenoid arm is reseated properly after reinstalling the newly cleaned solenoid. This procedure has successfully revived another CP4025 with that 59.F0 error.
@GODZLLA_STАй бұрын
That’s money from an idle!!! Nice run!!!
@S8ERАй бұрын
yeah off idle thats crazy... little foot brake or launch control and I could see him running sub 11.5 @ 120+ 🤯
@GODZLLA_STАй бұрын
@@S8ER what area are u in? I got an ST that beats hellcats and track hawks.. primarily stock ones, but still beat ‘em pretty good
@S8ERАй бұрын
@@GODZLLA_ST In the Charlotte NC area...I'm still completely stock and in several ST groups so I know plenty of you guys can beat me no problem. 🍻 In this care he's just so close to my own results I think it would be a crazy close race.
@GODZLLA_STАй бұрын
@@S8ER I’m opening up the motor.. upgrading my rods/pistons/lifter/springs/head studs/machine the heads and pull all seats out and let the wifey make a pass and see if I can get this thing to run a 10 flat 1/4 mile.. a lot of folks say it’s impossible, but stock motor and trans I ran 10.71 full weight.. throw about 4-5more psi after the motor work and I’ll break into 9s ..🤞🏼 I’ll know by winter, plan on having it done by November with the built trans
@S8ERАй бұрын
@@GODZLLA_ST 10s are bonkers for something that size 🤯 you would be a record holder at 10 flat / single digits correct? I think they are down to something like 10.3 or 10.4 at the moment? Wish you the best and hope you can hit those numbers 🫡
@S8ERАй бұрын
I wish you were in my area… this would be an incredible race against mine (though I fear it would be all yours to lose). Fantastic results!! 🍻 Edit: I missed that this was off idle 😮
@johnalcalaАй бұрын
Very cool but it appears to be purely cosmetic, no?
@firefox914Ай бұрын
I just go a dragy, but no count down is displayed on the phone or video. Otherwise, dragy seems to be working fine. Any suggestions as to why the count down is not being displayed?
@KenKyleRacingАй бұрын
@firefox914 the timer is only added if you export the saved video.
@Sys_333Ай бұрын
Thanks for the video. It helped me to open de printer, takte out the fuser and find the paper wrapped around the roller INSIDE the fuser 🤣😂 But it was already baked onto the roller. I can't unwrap the paper from the roller. So I have to exchange the roller itself.🤞
@TheMajdi862 ай бұрын
what the symptom for battery problem? Mine when pun chargem red led on, after minute it sepose show blue. But the led go off.
@KenKyleRacing2 ай бұрын
@@TheMajdi86 mine wouldn't get full sats, but a bad battery can cause various issues.
@travelquickies4112 ай бұрын
Love the graphics!
@yowunpansilu2 ай бұрын
On my m651 i got 59 f0 then i follow this procedure and i made sure to rotate the gear till i hear the sound. Now i get 59 00 F0 error. What to do?
@KenKyleRacing2 ай бұрын
Same thing. Either solenoid is sticking, or it is not seated correctly.
@yowunpansilu2 ай бұрын
@@KenKyleRacing thanks will check again. Keep up the good work ❤️
@erniea36632 ай бұрын
Nice
@dadmobile9602 ай бұрын
First on race day baby!
@thebeedata90842 ай бұрын
Great run!!!
@jordanmorgan98822 ай бұрын
Bro had an at 10 years before they came out lmfao
@malcolmw5132 ай бұрын
Cool. Thanks!
@dadmobile9602 ай бұрын
Transbrake sounds bad ass
@KenKyleRacing2 ай бұрын
It is, great for reaction times too.
@S8ER2 ай бұрын
Solid! Nicely done
@thebeedata90842 ай бұрын
Nice run!!!
@StevenNeidlein2 ай бұрын
That red mustang was a stick shift kinda not fair a 2019 plus 10 speed auto mustang gt 5.0 would dog walk that stinger