Can you review some hunting tripods for firearms?

Sexy!!

My god, this guy is a doofus.

My Garmin has been solid. Saw a guy getting 5000+ fps readings on the primal rights channel

From what I understand a muzzle break will help tighten up your groups it helps with the air around your bullet when it exists the barrel

You can buy locking set screws with brass or nylon tips. I doubt there is enough rotational force on the die to overcome the same torque you put on scope rings which should not mar the threads of the die.

I have not been able to get that bullet to shoot decent in my Ackley. At all. 2"is about the norm once in a great while I can get a 1.5" but still nothing like the rifle will shoot have put down some really nice groups with it. Just not with the 120 ttsx 140 shoot good I'm having a hard time wrapping my mind around it. But thanks for the info.

The 6&6.5 Creeds are pretty much loaded maxed out from factory loads. Proprietary powders is the difference from factory and what we load along with barrel length and chamber dimensions. Inside of 300 yds, high bc projectiles gains are minimal over cup and core fb or bt. Proficiency and accuracy is the name of the game. I'll keep my ..243's and 25-06 with 1-8 twists over the Creeds. Doing fine job with your channel 👍.

Meanwhile I am here lobbing 220 grain bowling balls from my 300 Blackout for laughs and 110s and 120s for Hogs. Works well for me out to about 200 Yards I could probably push them to 300, but I need to get a scope rather than a dot to shoot that far. My eyes are bad. XD

Always good to see testing results

Looks like it is a 22" barrel, according to J&A Outdoor's website. That's some serious velocity with Superformance.

Keep pushing!!! Velo!

Does it shoot under moa out to 300?

I load Hornady 143 gr ELD-X with 43.2 gr of Staball 6.5. My average velocity has been about 2783 fps with a 22" Savage 110 barrel. So far, it is my favorite load. I was using H4350 for a while but I was having to push the limits of pressure with that powder to get the velocities that I get with the Staball powder. I get better velocities and SD's with the Staball and no pressure signs. Accuracy is about the same; barely sub MOA.

Superformance is one of my favorite powders. It is temperature sensitive, but I’ve had great results using it in several calibers, especially 6.5 creedmoor. I even bought some Midwest powder from American Reloading that is supposedly similar to Superformance. Haven’t really worked with it much yet though.

🍄🇺🇸🤘🏼🤘🏼🇺🇸👍🏼

Enjoy your content but have zero interest in the 6.5. I believe the 6.5 and smaller projectiles are not suitable for large game hunting which I do. You are ok for deer but anything bigger no! People will argue this subject but I simply don't care about the argument period. If you hunt big game here in the Americas you must have 30cal or better for ethical killing. Does not matter if it can be done. If your goal is paper, steel or medium to small game, have at it. Thanks for the content :)

Got 130 CX all the way up to 2900 FPS on a 20 inch barrel (Tikka T3x CTR) with that superformance. Couldn't get them to stabilize or group though, planned to revisit with the 120 Grain CX. Looking at both of the box offerings from Hornady with the CX bullets for 6.5 Creed (Outfitter and Superformance) they both use the 120gr bullet, and use the 130gr exclusively with the 6.5PRC. Between impact velocity and twist rate needed to stabilize I'm sure there is a reason for this. Do note however, that the superformance is not in the Hodgdon "Extreme" lineup of powders so you may be better off with the staball or 4350 when you take temperature stability into account for a hunting ammo. Good luck and Thanks for the Video!

If your shots are never over 250, I'd find whatever powder launches the monometals the fastest and load them hot but safe and go hunting. Even if it groups 6" at that distance just always aim in the center of the zone. Dead deer. I'm still back and forth on whether or not I'll ever load the 6.5CM. I have so much factory ammo that shoots half MOA it would be kinda pointless for me. Norma Bondstrike, Norma Whitetail, S&B 140, and 156 grain cup/core bullets, Hornady ELDX. Now I have this new S&B BLUE tipped non leaded stuff to try.

Thanks for sharing brother 😁

NUMERO UNO

❤️‍🩹🤘🏼🙏🤘🏼❤️‍🩹

Read the instructions

Minimum 12-15 inches away

I went to their website and they do not have this brand on the website at all.

You still live

Very beautiful singing great job

Don't trip and fall on this

Glad to see that powder is shooting decent! Keep up the good work!

TRY RELOADER 16!

Good video

Try some 110 grain Barnes there awesome on deer

With 3 shot groups and sst 130 57gn of H4831sc getting sub moa with tikka 270 win getting 1/2 moa with same powder and 130 nosler ballistic tips. Getting ready to try H4350 with 150 ballistic tips. I got some 130 partition to try and some federal 136 terminal accent but have made mind up on powder yet

Can’t hide money

I loaded up the 136 grain Federal TL (basically the terminal ascent) over superformance, again a near full case, and it's scorching out of one of my stainless Tikka 270s. I used that primed nickel Fed brass from American Reloading.

Hey from Saraland AL! I have been curious about this powder brand, would you recommend it?

Are these test loads in your Tikka?

thanks, I was wondering about these powders. I have some targets you might like for load testing. do you have a PO box?

❤️‍🩹🤘🏼😜🙏🙏😜🤘🏼❤️‍🩹

I had a 700BDl. i loved it. Should have kept it.

Whoa! Tingles. Amazing

👌🏼 she has to be the lead singer at Church!

Thanks for sharing man enjoyed that , Great job 👍

🇺🇸

I have found the in my savage trophy hunter 111 in 30-06 loves 55.0 grains of H380 with 165 grain SST's i set the bullet back 0.0010 from load data i found at HODGDON reloading data and my gun is shooting sub 1/2 MOA over and over i just sighted zero at 200 yards and i am shooting 0.710 at 200 yards my powder weight max is 56.5 but my rifle does not like that good enough for hunting but not for my taste i wonted better and dropped powder to 55.0 and i am very impressed bumping the neck of the fired brass back 0.002 made a big difference

She did amazing!! 🇺🇸🇺🇸🇺🇸

That’s awesome! Great job Mrs Reloader! ‘Merca