Hi there… I really enjoyed this video, thanks for sharing. I realise that this was almost 2 yrs ago, but when you shake this skull, is it soap bubbles that I can see inside? Or is that just the mixture of water and glycerine? Much love from Nat. (Brisbane, Australia) ♥️♥️🇦🇺
@mengraciap.56052 күн бұрын
Vaya churro.....
@QnsPrincess3 күн бұрын
Lovely tutorial. What size was the skull mold?
@leannemitchem886512 күн бұрын
I know this video was from 2 years ago but I just found you today. That tray is so stunning. I am very new to resin and I have the same window cling. I cannot wait to try this. Thank you for sharing ❤
@smurphyart-love2create26811 күн бұрын
I still have this tray and it looks as good as the day I made it. I can't believe it was 2 years ago 💜
@MakeupMobster22 күн бұрын
I’m trying to do something similar as to what you’re doing but I cannot seem to find any way to do it!
@smurphyart-love2create26820 күн бұрын
Please share when you have found a way to do it. Using two different brands may work better ☆
@lisacapers585329 күн бұрын
Beautiful, going to try it.😊❤
@smurphyart-love2create26820 күн бұрын
please let me know who it turns out ♡
@texastyphunАй бұрын
Is the effect lost if you add a clear layer to protect the holo effect? (Im assuming it would but i wanna be sure)
@smurphyart-love2create26820 күн бұрын
No I think it would stay. I still have this tray, and the effect is still as beautiful as the day I made it.
@traceychivers1988Ай бұрын
Absolutely gorgeous
@smurphyart-love2create268Ай бұрын
Thank you so much 😊
@traceychivers1988Ай бұрын
I have this moukd i can't wait to start making and just ordered my first lot
@smurphyart-love2create268Ай бұрын
This is one of my favourites 😊
@dawnsummers5736Ай бұрын
My mica did exactly same, it wouldnt totally mix.
@smurphyart-love2create268Ай бұрын
I think it is how it reacts to resin. All my creations have done it.
@KELLYTOOLZАй бұрын
Bowbaoo? I'm confused, what is the boowboo??????????
@smurphyart-love2create268Ай бұрын
Sorry it is a baubuel, they hang on your Christmas tree. 😊
@vanessarossi-sondgeroth84902 ай бұрын
Thank you so much for this!I can’t wait to try this, fabulous!
@smurphyart-love2create2682 ай бұрын
Hope all goes well for you. Happy this could help 😄
@WikidlySexz2 ай бұрын
Absolutely beautiful. I just found your channel today and I subscribed😮
@janekimmick49232 ай бұрын
I love this! I have been wondering if the window film would work on resin and so happy I stumbled onto your video! You now have a new subscriber. 🙂
@smurphyart-love2create2682 ай бұрын
Thank you so much 😊, I will be returning to resin work in the future 😁 cant wait to start 😃
@dittemor22 ай бұрын
Beautiful
@smurphyart-love2create2682 ай бұрын
Thank you
@jadecollins32812 ай бұрын
Why no gloves when using epoxy resin??
@smurphyart-love2create2682 ай бұрын
I know I should, sometimes I got lost in the moment. I have made sure I have plenty now ☺️
@lisacapers58532 ай бұрын
That is nice, l like the one with the film
@smurphyart-love2create2682 ай бұрын
Thank you so much 😊
@kymmcmaster67153 ай бұрын
OMG that is just stunning. I absolutley love it.
@smurphyart-love2create2682 ай бұрын
Thank you so much. Works great with artificial flowers 🌹
@kymmcmaster67153 ай бұрын
Great job, well done. I love it Can you please advise how much water to glycerol do you use & also did you leave the plastic wrap on the bauble?] I have watched the video 4 times to try & see if I missed something but no I haven't. I was hoping to get more info from this video so please can you let us know what we need to do Thanks
@smurphyart-love2create2682 ай бұрын
Hello apologies for not replying sooner. I did not weigh the liquids. I kinda went with a 20 / 80 mix. 20 being water. But I kinda mixed a little and a time, until I was happy with the movement 😁 Hope you get it right for you.
@karenmclaughlan9128Ай бұрын
I use half water half glycerin
@K0MRDRadioPrepper3 ай бұрын
Couldn't you have used baby oil instead of Glycerine water?
@smurphyart-love2create2682 ай бұрын
Yes baby oil would work just as good. Easier to get hold of also ☺️
@charlenepallante1833 ай бұрын
That little bee is way cool!!!! Love this!!!
@smurphyart-love2create2683 ай бұрын
Thank you so much 😊
@ownsacat3 ай бұрын
I like both those trays. Very nice
@smurphyart-love2create2682 ай бұрын
Thank you so much 😊
@nancysepic3 ай бұрын
GORGEOUS! One question. Which way did you lay the window cling down in the mold?
@smurphyart-love2create2682 ай бұрын
I laid it with the holographic film facing up. This would allow it to transfer, when I poured the resin. Then peeled it off, when set.
@dittemor23 ай бұрын
Absolut stunning ❤
@smurphyart-love2create2682 ай бұрын
Thank you! Cheers!
@dittemor23 ай бұрын
Beautiful artwork ❤
@smurphyart-love2create2682 ай бұрын
Thank you so much. Although the resin does not attach very well to Jesmonite . Will have to glue.
@lisacapers58533 ай бұрын
Seal the filmwith uv resin after sealed use liquid rubber to make the 2nd seal to keep the water in.❤ Love the skull.
@smurphyart-love2create2682 ай бұрын
Thank you, I used UV resin on a new project and it worked very well.
@lisacapers58533 ай бұрын
And also the jar mold from as well
@lisacapers58533 ай бұрын
Pretty, where did you get the mix and the fabric from. Pls tell ❤❤😊Lisa
@smurphyart-love2create2682 ай бұрын
The fabric I got from Hobbycraft here in the UK. The mix was from Polysil UK. Thank you for asking, I am happy to help.
@anonimatadarkwds3 ай бұрын
Wonderful thanks. Amazing how it's getting better effect. Thanks for sharing to us
@smurphyart-love2create2682 ай бұрын
Thank you so much 😊
@dianaschumaker42524 ай бұрын
Does the window film have an adhesive side, and does that side stick to the mold? Then after resin cures you remove it from the resin? I’m not sure if I missed something. This turned out absolutely amazing!
@smurphyart-love2create2682 ай бұрын
Exactly that, the film kinda just stuck to the mold and with the weight of the resin when pouring, it did not move. Thank you, and apologies in the reply. I have only just seen them all.
@GGG.7934 ай бұрын
It always works on the docker color so much better although you can see it on the lighter color. I’ve never used the cricket machine to do this. I’ve just always carefully cut with very small shop scissors and I’ve never had a problem. I’m happy that come out for you.❤
@smurphyart-love2create2682 ай бұрын
Thank you so much. I have found it quicker just to cut around the mold. Haha
@MsSnailspace5 ай бұрын
i love how these turned out! i'll have to try it! tfs
@smurphyart-love2create2684 ай бұрын
Thank you, this set is definitely one of my favourite creations 😁
@athenatralenberg66046 ай бұрын
What size ball did you use?
@HeyokaRavenEmpath7 ай бұрын
Can you please explain the clingfilm ... how, when are where was it placed? Thanks
@smurphyart-love2create2686 ай бұрын
It has been a while since I made this skull. I placed the cling film loosely on my first layer. Once cured 24 hours later, I removed the film and completed my final layer. Each layer took 24 hours to cure.
@PaulK390S90V7 ай бұрын
What silicone lubricant do you use? Actual silicone spray or a spray meant for silicone mold release?
@smurphyart-love2create2686 ай бұрын
I used a can I purchased from a hardware store. Usually used for metal fixings or chains.
@oody31527 ай бұрын
What type of paper is used?
@lisacapers58538 ай бұрын
Love skull, beautiful . What size skull mold?❤❤❤❤😊
@annmariedesimone88919 ай бұрын
Aww that’s a shame. Mix it with the Jesmonite liquid instead of water. It may be the water that isn’t allowing the paper to stick.
@user-sw7vk5lp9i9 ай бұрын
When using the oil and water how much of each? Thanks
@susanmitchell35169 ай бұрын
so cool x
@georgiastewart447910 ай бұрын
Shared
@georgiastewart447910 ай бұрын
Love it!
@gerdolenemuller730111 ай бұрын
Smart!
@smurphyart-love2create2689 ай бұрын
Thank you so much 😊
@roguered70611 ай бұрын
I have already tried this so I knew the window film would work, but I had to watch till the end to see your reaction. Totally worth it! Both pieces turned out lovely.
@smurphyart-love2create2689 ай бұрын
Thank you, this is still one of my favourite creations 😃
@edienorris926811 ай бұрын
Love it
@leannharris5854 Жыл бұрын
You mentioned your Instagram account.. How do we find you? There is no link or Instagram name. I really want to see how you did the snowglobe
@africats25 ай бұрын
I would also like the video please 🙏🏻
@africats25 ай бұрын
Right?
@africats25 ай бұрын
@@leannharris5854 I think I figured out how to seal it. Cut the top off tje ornament. Lime the edge with UV resin and put a clear, plastic piece over the top then use a UV light
@photomasteretify Жыл бұрын
Can you use a druzy in the big skull to get that same look as the little skull?
@smurphyart-love2create2689 ай бұрын
Yes I you can, if you position it correctly.
@photomasteretify Жыл бұрын
Can you use just a druzy in a large skull mold then take it out at the end and make it look like a geode druzy type in the top of the head?
@smurphyart-love2create2689 ай бұрын
Sorry about the delay in replying, I have been away from my channel. Started a new job x You would be able to add a druzy in the top.