6 ай бұрын
7 ай бұрын
9 ай бұрын
10 ай бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Пікірлер
@Uzrdinma 11 сағат бұрын
Hi Daniel. The USB routing doesn't work for the M32 board. I can't sync muting on the board with the DAW
@danielkharrat 11 сағат бұрын
@Uzrdinma that's true the m32 card takes the sound directly from the preamps but you can use the 16 ultranet outputs if you're not already using them for something else
@Uzrdinma 10 сағат бұрын
@@danielkharrat kindly walk me through how to set that up if it isn't too much stress
@danielkharrat 10 сағат бұрын
@Uzrdinma in the ultranet page you will assign outputs 1-16 to direct out channel 1-16 and set the tap points to input+mute Then in the card page you're gonna assign outputs 1-16 to ultranet 1-16 But you only get the mute for those 16 channels You can have 6 more channels with mutes if you also use the aux out page and assign out 1-6 to direct channel out 17-22 and set the tap points to input+mute and in the card page assign 17-24 to aux 1-6/M But the rest of the channels will go without the mute
@Uzrdinma 7 сағат бұрын
@@danielkharrat hi Daniel. So I used the Reastream standalone on FL Studio. The master fader control isn't controlling the volume in OBS. For example, when reduce to the lowest on FL Studio, I'm still hearing sound in OBS
@0oTHEJACKo0 23 сағат бұрын
3:13 If only the A port can do the syncing, is the following scenario possible? - a stagebox in the middle between two x32's. - The FoH console from which I want to send the LR signal via AES A to the stagebox and from there via AES B to the AES A input of the x32 in house console. - Hence I cannot use the in house console as the Sync Master? Only the FoH console or the stagebox itself, right? Because the stagebox doesn't receive the sync from AES A but from B and hence doesn't properly sync? -> So the solution is to put the stagebox in the middle into Sync Master?
@danielkharrat 15 сағат бұрын
@@0oTHEJACKo0 just swap the cables Plug the foh mixer to the A port of the stagebox and the house console to the B port
@0oTHEJACKo0 13 сағат бұрын
@@danielkharrat Thanks for your answer Daniel! the cables are already like that! That wasn't the problem ^^ I guess the clock must just come from the FoH console and not from the inhouse (2nd) console. But one follow up question: Is it possible to receive the outputs of the stagebox on the 2nd console? The first console (FoH) sends the signals to the outputs of the stagebox in the middle between the consoles... Was wondering if there is a way
@danielkharrat 13 сағат бұрын
@0oTHEJACKo0 only the mixer that is connected to the A port of the stagebox can send outputs to that stagebox
@0oTHEJACKo0 6 сағат бұрын
@@danielkharrat I guess receiving of the outputs to the 2nd console from the 1st one only works with patching the outputs on the stagebox physically with XLR to the inputs and then receiving the inputs on the 2nd console...
@ashishk3692 Күн бұрын
which language is the lyrics displayed on the screen
@danielkharrat Күн бұрын
@@ashishk3692 arabic
@Alex_Martz Күн бұрын
Thanks, question: If I have a M32R (8 local outs) and a DL32 (16 outs) Is it possible to make the system to see ALL the 24 outputs independently?, I can't figure out how to assign more than 16 outs using both units regardless of patching, I want to use the 8 local outputs of the M32 to send different stuff, like direct outs or insert sends to other hardware
@danielkharrat Күн бұрын
In the routing menu the "XLR" page is where you assign the local xlr outputs on the back of the mixer And on the AES50 page is where you assign the stagebox outputs By default they are both assigned to out 1-16 from the OUT page But you can go to the XLR page and assign the local outputs to Aux out or to ultranet and then in the ultranet page you can choose the signals and tap points
@Alex_Martz Күн бұрын
@@danielkharrat Awesome, I'll try it, thanks so much!
@stevemcclanahan3845 2 күн бұрын
Thank You for this tutorial! Saved me a ton of time and guess work
@manfredamponsah5386 2 күн бұрын
Thanks 🙏 a lot ❤🎉
@kellypeterson2625 3 күн бұрын
That is pretty cool
@KevinSimpson031 3 күн бұрын
Great video, simple and informative.
@user-dq1zd4mu7f 3 күн бұрын
Accent is to much
@signobeat27 4 күн бұрын
I can do the same thing without the console? Using just the edit midas in computer?
@danielkharrat 4 күн бұрын
@@signobeat27 no
@signobeat27 4 күн бұрын
Thank you
@zackcarpenter3980 4 күн бұрын
this is great
@MKMTTG 4 күн бұрын
what cable you use for audio for atem mini t to mixer how did you get left and right output
@danielkharrat 4 күн бұрын
@MKMTTG 1/4 inch to 3.5 mm Ts cable Plug it to the headphones output on the mixer and in the monitor page select the source to be LR (that's the default)
@MKMTTG 4 күн бұрын
@@danielkharratThank you how do I put the volume up because my sound is low in the video
@manfredamponsah5386 4 күн бұрын
bro really appreciate u
@brewingjitsu 5 күн бұрын
Fantastic stuff! Every minute is really informative, especially coming to this mixer from other boards.
@mauricioapoteom2604 6 күн бұрын
Thank you brother
@mauricioapoteom2604 6 күн бұрын
Thank you bro.
@creativefacts2129 7 күн бұрын
Make a tutorial about How you routing on your gigs.?
@therealSCNR 7 күн бұрын
You explained nothing
@fatherprincipal 9 күн бұрын
Oh you mean Gain Structure😂
@MohammadrezaMemarzadeh 11 күн бұрын
very good tutorial. is it possible to connect two M32C to a single or multiple stage boxes? my purpose is to have one M32-edit on stage monitor, and another M32-edit for FOH (in two separate PCs)
@danielkharrat 11 күн бұрын
@@MohammadrezaMemarzadeh you want 2 different mixers or 2 PCs to control the same mixer?
@MohammadrezaMemarzadeh 11 күн бұрын
@@danielkharrat allready sent you an e-mail 🙂
@MohammadrezaMemarzadeh 11 күн бұрын
@@danielkharrat allready sent you an e-mail 🙂
@tempi6994 12 күн бұрын
how can I record with the eq on my mixer? since I'm not sure how to eq it on the tracks live app?
@nungu60a 12 күн бұрын
Reaper just earned my respect..great workflows. Thank you
@emmanuelbarrientos6601 14 күн бұрын
Pro Tools only allows for 8 audio tracks. How can I set it to more than 8 audio tracks?
@danielkharrat 13 күн бұрын
Try a different driver
@rosspeterson2658 14 күн бұрын
Is there a scaling option for the software/app
@danielkharrat 14 күн бұрын
@rosspeterson2658 yes when you go into the app click on the gear icon on the top right corner and go to global setup and you'll see the scale slider
@jomon_raju 14 күн бұрын
can you please suggest me a good digital mixer for my church, which comes within $1000
@danielkharrat 14 күн бұрын
@@jomon_raju midas mr18 or behringer xr18
@jomon_raju 12 күн бұрын
@@danielkharrat thank you ❤️
@bozge11 14 күн бұрын
I just got an X32 Compact and output routing is very confusing. Your video is the best video on output routing I've discovered! Thanks!
@corporatejanitors3728 14 күн бұрын
Changing your voice to different voice is very distracting and creates confusion
@tempi6994 16 күн бұрын
Am I able to mix it after I recorded the audio? Or I have to do live mixing for my recording?
@danielkharrat 16 күн бұрын
@@tempi6994 the recording is raw. You mix it later
@tempi6994 15 күн бұрын
Thank you so much! But I just tried to use it but the record/play switch doesn’t show up its just blank on my mixer which is a m32
@bugazavr 16 күн бұрын
cool, neat trick thanks!!
@solomonsurry 16 күн бұрын
Hi Daniel,Pls i couldnt convert those practice scenes to jpg.Pls kindly suggest best way to view them.Thanks
@danielkharrat 16 күн бұрын
@@solomonsurry you can't convert it to anything it's a scene file You load it on your mixer or on the m32 edit app
@murraywebster1228 18 күн бұрын
Can you make a template for A&H Qu & SQ please 🙏
@johnsurdy 18 күн бұрын
Thanks for this! What does the Factor L and R do?
@danielkharrat 18 күн бұрын
@@johnsurdy divide the time if the delay
@AdrianVains 18 күн бұрын
Hey Man, kind regards from Mexico. I’m reaching out to you because I been watching you KZfaq channel a lot and I think your are the one person you could guide me about an audio decision a need to make. Behringer X32 rack plus Behringer s32 OR Midas m32core plus Midas dl32 I’m on a Turing band. I want to upgrade from xr18 to one of these ones. Could you give your opinion please ?? 👽👽💪🏼💪🏼 The one plus I see getting de x32 rack is that if anything “falls apart” in someday that the m32c is not matching with the dl32 I still have de x32 rack as a stand alone console. If you could give any other reasons to go for one above the other I would love to hear it.
@Zack-Hates-Youtube 18 күн бұрын
5:25 was exactly what I was looking for. Thanks! Tonight at a gig I asked the much more experienced sound engineer who was running sound for the band how I can EQ the left and right Mains separately with pink noise. He told me I needed to route the left and right output to 2 stereo matrices. On the first I only use the left side and on the second I only use the right side that way I have a parametric EQ that I can use to tune the system instead of using the much more simple EQ on the main mix fader that affects both left and right. I asked him how to do this because I noticed today when he was tuning the system that the left and right main speakers sound very different from each other. I don't have access to the dbx driverack so I'm going to have to adjust the EQ on the board itself. Thank you for showing how to route it properly
@InternetAccount1134 18 күн бұрын
Man … things got ugly pretty quick with that rack power
@how2playgospel 19 күн бұрын
By far this has been the best explanation of Compression that i've experienced so far. Kudos for sharing this walkthrough.
@Ricks_Audio_Visual 20 күн бұрын
Awesome video straight to the point has all I need to know it!! I’m on A&H SQ but i can transfer the relevant info !!
@tsarodavid9730 21 күн бұрын
You are good
@tsarodavid9730 21 күн бұрын
Geat teacher
@naneezay 22 күн бұрын
Hey Daniel. Appreciate the vid. We use X32 at church. This sound engineer came and set up matrix for our livestream. He told me the that sliding up the individual instruments channel won’t affect the livestream. Our bass guitar is super low in the live. I want to increase it only in the livestream. How do I go about doing this?
@danielkharrat 22 күн бұрын
@@naneezay what's the input level you're getting on the bass channel?
@rdenotter 22 күн бұрын
Been doing sound for 40+ years, but never really got into the overall tuning--somebody else always did that for me. Your video is amazing, and helped me understand the process end-to-end. Now to wait for the ECM8000 to arrive!
@borabecker5834 22 күн бұрын
I cant see LR as a Source, I have obviusly paid for the app. Can you help me?
@danielkharrat 22 күн бұрын
@@borabecker5834 it is gone with the new update. It doesn't exist anymore. Now you have 0 and minus infinity instead
@borabecker5834 22 күн бұрын
@@danielkharrat thanks! 😞
@borabecker5834 22 күн бұрын
I love you and Mixing Station
@sbahlemenzi5475 22 күн бұрын
Hi I would like to ask question can I us this mixer if I'm mixing a project via my tablet? Or
@IagoVital 22 күн бұрын
I can assign the headphones output to the FX 3 and 4 as well, right? Cool
@danielkharrat 22 күн бұрын
@@IagoVital no
@Slenderchunk 23 күн бұрын
Great explanation. Cheers!
@naneezay 23 күн бұрын
My sound engineer is using matrix for our church livestream…however the bass is super low in the livestream…He said if I turn up the gain or slide the bass guitar channel up, it won’t affect the volume in the live. I’m guessing the di box I’m using is sending poor signal to the matrix..what do I have to do to turn up the bass guitar volume only in the live??? By the way, he created a bus guitar bus mix too..we use the behRinger x32 too
@naneezay 23 күн бұрын
Hey boss. This stubborn sound engineer we hired to tune our sound set up matrix for our church livestream. However, he is not willing to show me how to turn up the bass in the livestream smh when I mess with the gain or the compressor gain, it affects both in house and the live. How do I increase only the bass in the live without affecting the in house…we use x32 by the way..:plz help 😩
@ThalamusGhipopotamus 23 күн бұрын
Why use a physical wire for the reference signal if the operating system has a virtual send to the channels from the master?
@danielkharrat 23 күн бұрын
@ThalamusGhipopotamus to eliminate variables. You're passing both signals through the same digital to analog converters with the same electronics, same preamps, same latency... Both signals are getting "affected" in the same manner so the difference between them is what's happening with the speakers in the room nothing else
@ThalamusGhipopotamus 23 күн бұрын
@@danielkharrat But the program itself calculates the delay and sets it to the measured signal for coherence
@PeterAymanL 24 күн бұрын
On point !!! Great video