Hi There is some videos in youtube showing dell or hp psu hot plugs convert to bench power suply. They could run the psu hot plugs by connecting some pins but they just could run them to take a small curent not the maximum curent. Could you please tell me how to run my "hp 2450w hstns-pr16 platinum hot plug" and "hp 2650w hstns-pr42 platinum hot plug" into a bench power suply to take the maximum curent and power? Kind regards Kevin
@husky24mx2 күн бұрын
Hello, also had a Fujitsu 12V only Powersupply from Fujitsu. Its a little bit different, but there was also R901 blown! Also had to replace the TNY380PN as Source Drain was in the range of 30Ohms. After changing both parts it's working again!! Thanks for your Vid!
@mendaman723 күн бұрын
Thank you
@NACHOXVALLE3 күн бұрын
Master, and where can we find the EC file in case of need it? Thx for your valuable time.
@andre_05 күн бұрын
This project is amazing! Thank you for sharing it. I've ordered the components to build it, but the only thing I can't figure out is the pinout of the socket. To which pins on the GX16 connector should I connect the wires from J1 and J2 to? Mine is the 7 pin version.
@FixTronics4 күн бұрын
Hi friend The GX16 pinout is available in the schematics Please check the video description I wish you all the best brother
@andre_04 күн бұрын
@@FixTronics Thank you for answering. The pinout is missing on your new PCB schematics, but I just found it on your other video (v 1.0).
@andre_04 күн бұрын
@@FixTronics Thank you for answering. Just found the pinout in the schematics from your first video (v 1.0). I think the pins are not present in the schematics from your PCB (v 2.0), unless I'm missing something.
@FixTronics4 күн бұрын
@@andre_0 You welcome friend Yeah its only on version v1.0 I wish you a pleasant life
@mccarterjg7 күн бұрын
Okay if I unsoldered that chip and send it to you😅
@SagarPatel000848 күн бұрын
don't buy any product of enit all are wasting money no support nothing
@meghansuncle21168 күн бұрын
I have several thinkcentre M710e's dead but don't see damage. Have you run across this one?
@fatigmakers8 күн бұрын
Amazing video. Very informative and straight to the point
@UgobestAnene16 күн бұрын
Nice one. Please how can I buy ic for my work
@FixTronics15 күн бұрын
Its available on Aliexpress at this link a.aliexpress.com/_oBG1Zc6
@user-tq5wm7jf7t16 күн бұрын
How would that have gotten bent?
@mrmc5517 күн бұрын
❤❤❤❤ thank you sir
@adilalsaidi152517 күн бұрын
يعطيك العافيه
@FixTronics17 күн бұрын
Thanks bro
@lortega7017 күн бұрын
I wonder if the lack of display signal is really related to the red led light on the cpu tray. Why a problem with the CPU would prevent the GPU to generate a video signal?
@maz.reparateur18 күн бұрын
Nicely done, thank you !
@FixTronics17 күн бұрын
You welcome brother
@sk88coffeeart.18 күн бұрын
Perfect 👌🏿
@FixTronics18 күн бұрын
Thanks brother
@kadermaideen13519 күн бұрын
Thank you very much for such extraordinary explanation.
@Make_Life_Simpler19 күн бұрын
Amazing
@FixTronics19 күн бұрын
Thanks brother
@ezequieljorge877021 күн бұрын
Thank you very much for the video. I lifted the dap053 ic and with it line 15 came off (it's not going anywhere from what I see) and I changed the resistance 30RO (30k) but I got 27k, is that okay? The source gives 12v but after 3 seconds it falls
@FixTronics18 күн бұрын
Hello friend If you check the video at 42:14, pin 15 does connect to somewhere.. About the resistor I this 3k is big enough to make some effects to the circuit its used in. So its better to use 27k+3k resistors in series to make it 30K
@hotlava222221 күн бұрын
Hello, can you maybe assist where to look when the battery charging voltage "without or with battery" at connector pin is 8v but i know checking another "laptop" it should be 12.6v....
@FixTronics21 күн бұрын
Hi friend The battery must speak with the EC chip through the SMBUS before it can charge. So the battery has to be connected in order for you to see its voltage going up. Make sure you have a good non locked non burnt fuse, battery.
@audiophile100khz322 күн бұрын
Hi, can you remove bios password on cf-30 mk3? I'll remove bios chip/ ship to you and pay you also pay the return fee,
@FixTronics21 күн бұрын
Hi, it would be more convenient if you could read the bin file out of it and send it to me to try removing the password then send it back to you and write it back to the chip. To avoid paying unnecessary fees and avoid package loss during shipping. If you don't have the tools to read and write the bin file, I would suggest you buy any cheap programmer like this ( a.aliexpress.com/_oFyMURM ) its really cheap and has all the adapters you need. You can search on KZfaq how to use it. Its better for you to buy this tool instead of paying shipping fees. And as you are able to open the laptop and reach to the bios IC, it wouldn't be harder to read it. I will do it for you for free, you so you just send me the file.
@hotlava222222 күн бұрын
Surely , One of the best Bq videos out there!
@intheshitter27 күн бұрын
This is great, thank you so much for your video's. Much appreciated 👍
@Random-mt4jt28 күн бұрын
mine was my ps4 phat version. please help
@pawelklosinski28 күн бұрын
thanks for another video, so what actually was an issue here? PC got stuck in Bios for some reason and resetting CMOS solved the problem? If so, did you have similar cases before, does it happen often?
@user-qh6xs5di6i28 күн бұрын
Thanks for the explanation, my friend ❤
@FixTronics23 күн бұрын
You welcome brother
@illybazzi29 күн бұрын
legend
@pawelklosinskiАй бұрын
Great, informative tutorial, thank you sir! I have a question, when one of the pins (PRBT.OUT) should be 3V, and it is only 0.8V and there is voltage drop across the resistor it is connected to, what does this indicate? Thank you.
@kuangalenga154Ай бұрын
Do you have Facebook page or WhatsApp contact?..need to contact you
@pawelklosinskiАй бұрын
Thank you very much for detailed explanation. Is this for both desktop motherboards and laptops? Is PBTN.OUT a voltage drop from 3.3V to 0V when the button is pressed? I work on a motherboard where it is only 0.8V when not pressed (it drops to 0 when pressed). I think this is not correct but all the voltages supplied to Superio seem to be present, I'm puzzled....
@kuangalenga154Ай бұрын
Really like the way you explain this ideas
@ThepluginguyАй бұрын
What else can we do with this programmer?
@rajeewaperera1752Ай бұрын
Hi, does this heating element has PTC thermo sensor?
@FixTronicsАй бұрын
Hi Yah it has ptc sensor
@rajeewaperera1752Ай бұрын
@@FixTronics what the resistance of PTC and heating element?
@FixTronicsАй бұрын
@@rajeewaperera1752 The heating element is 1.7ohms and the PTC sensor is 50ohms which increases with temperature
@pawelklosinskiАй бұрын
Simply awesome, learned quite a lot from this, thank you sir!
@FixTronicsАй бұрын
Welcome brother
@pawelklosinskiАй бұрын
Another nice video, thanks for sharing. Started watching your pc motherboard repairs, but this is also interesting.
@FixTronicsАй бұрын
Thank you so much brother
@EddiePunchedАй бұрын
Very good video, it helped a lot, thank you.
@FixTronicsАй бұрын
Thanks brother
@mariadassarokiasamy9336Ай бұрын
Cristal frequency 32.768kz,
@FixTronicsАй бұрын
Yes brother my mistake
@bigonprivacy2708Ай бұрын
Well done!! Can you please direct me to where you got those yellow relay switch? Thank you!
@FixTronicsАй бұрын
Thanks bro I got them from Aliexpress as a kit Here is the link if you want: a.aliexpress.com/_oChDWlI
@siyabongahlongwana2386Ай бұрын
I have this exact model but it starting itself on startup. How can I fix it? What are voltages of the 1pin power connector
@all2funnycomments724Ай бұрын
which program do you use to flash the bin? thank you
@royjohnson6623Ай бұрын
il problema è che in uscita la pressione è troppo bassa
@Dieselguy1922Ай бұрын
Hi sir, can I send you the bios chip and you just tell me what the password is? I don’t have the holder to insert the bios in to pull the Bin file. Thank you.
@dzabakwesi2213Ай бұрын
Excellent explanation sir. Been able to explain difficult concepts within minutes is mind blowing. Please just make more videos.
@framerboy3066Ай бұрын
I having the same problem on my brother 7020 but I don't have anyway to test the traces and I would like to know what I should do and if the traces can break over time or is this somthing that has to come from factory
@frackjohnАй бұрын
Saved me time and effort. Thank you
@r.abarajithan8498Ай бұрын
Thanks 🎉
@srinivasan-bd7ifАй бұрын
im try to check but not showing crystall value
@mihalym.6876Ай бұрын
Finally fially somebody explained this clearly. Got answers why the MB is not starting when no coin battery is inserted: PCH core not getting voltage due to missing LDO 3.3V, possible a faulty (broken) diode. Thank you!