In what order replace belt back on bottom top or top bottom?
@averagemaintenance38753 күн бұрын
@4321superkris Just make sure that belt is on all pulleys before working with tensioner. Whatever way is easier for you to go around. It is always good to have someone to help you to keep a belt in place before working on tensioner. Good luck.
@lylithmussington49595 күн бұрын
Bought this washer very noisy the fabric softener dispenser does not work and the lid lock broke i csnt find the part online
@averagemaintenance38755 күн бұрын
@lylithmussington4959 Sorry that happened. To find replacement parts, try. www.repairclinic.com, or www.supplyhouse.com
@ritaritata34575 күн бұрын
Bought it beginning of the year and i dont use it very often. I try to use it today and the time always shows 0.02 (2 minutes), and when i try to select the wash cycle the buttons don't work, it gets stuck on 0.02...tried all the buttons and also switch the device on/off many times, something seems to be stuck😢
@averagemaintenance38755 күн бұрын
@ritaritata3457 Try to turn it off for longer than one minute and then turn it back agai. Switch braker if hardwired. One more thing that comes to my mind is press the Cancel button and hold it for longer than 3 seconds. Try it even when other buttons if Cancel does not work.
@user-pz6ee8pk8x6 күн бұрын
THE BODHI12345
@pennilessjester2117 күн бұрын
Only 4 easy payments of 39.95
@averagemaintenance38757 күн бұрын
@pennilessjester211 My was a little cheeper.🙂
@gaylemamabutterfly7 күн бұрын
Thank you. I couldn't figure out how to remove the darn thing. Very helpful!!!! Take care.
@averagemaintenance38757 күн бұрын
@@gaylemamabutterfly You are welcome. Thank you for watching and commenting.
@gaylemamabutterfly7 күн бұрын
@@averagemaintenance3875 Hi again, thank you, thank you again. When I removed the filter thing, it was so disgusting and under it was full of gunk too. I used chopsticks to pick it out. Did a load and oh my goodness that smell is gone. Take care.
@jaredanderson662310 күн бұрын
Thank you, very helpful 🙏
@averagemaintenance387510 күн бұрын
@@jaredanderson6623 You are welcome. I am glad to hear that. Easy and money saving.
@user-ci7tz1fb2v11 күн бұрын
I'm sending my NEW 1 day old back to Whirlpool for a replacement for a function that will not work,even if I unplug the darn thing for hours to reset it and it still will not work. Electronic panels looks great,but is the gremlin';s still lives in it ? It a great washer,if it works. The R&D department needs to get a hold of their Quality Control Dept. and do their job on the ISO 9100 certified.......
@averagemaintenance387511 күн бұрын
@user-ci7tz1fb2v I am sorry to hear that you have all the issues with replacement. Looks like corrective action needs to be issued. 😄
@lillydeecreationsllc.902412 күн бұрын
Thank you! I need my coffee!
@averagemaintenance387512 күн бұрын
@@lillydeecreationsllc.9024 You are welcome. Same here. Can't function till I have a cup.☕️
@topcat599212 күн бұрын
Does this unit rust at the vent located on the top left?
@averagemaintenance387512 күн бұрын
@@topcat5992 I did not see any rust.
@topcat599212 күн бұрын
@@averagemaintenance3875 great, thank you for responding. Another reviewer spoke about rust on a new unit in 1 year. How long is the regular cycle?
@averagemaintenance387512 күн бұрын
@topcat5992 You welcome. It is washing at the moment, I will check it out when done and let you know.
@averagemaintenance387512 күн бұрын
@topcat5992 I watched the video, and at 3:08, you could see when I go through cycles. The normal cycle is 2 :53 long.
@topcat599212 күн бұрын
@@averagemaintenance3875 Appreciate the info! Wow 2:57 is too long isn't it which equals to $$$ water and electricity $$$?My 16 year old whirlpool finally gave up (started running all night) but it's usual cycle was around the 75 min mark. Newer dishwashers, I thought should be more efficient and sounds like the Maytags are no longer like the ones built to last atleast 15 yrs. Thanks again for responding.
@hannah6736812 күн бұрын
Thanks for the video. Very helpful. We have the same dishwasher installed about a month ago. It cleans the dishes very well, however, there is water left in the spray arms after each wash so when I pull the racks out the water drips down and wet the dishes below. Do you think if it's an installation issue or the machine has defects? Thanks!
@averagemaintenance387510 күн бұрын
Some water will always be there, but I believe that heated drying should get rid of it. Also, try to empty the bottom rack first to avoid water dripping on dishes.
@hannah6736810 күн бұрын
@@averagemaintenance3875Thank you so much for your response! The top one holds quite a bit of water (almost like a running faucet) so I was not sure if it was because there is a leveling issue or the arm has some problems. It’s good to know it’s normal to have some water there. Thanks again!
@averagemaintenance387510 күн бұрын
@hannah67368 That seems like a lot of water and it makes sense to check the level of dishwasher, If you did not already. An additional question I have is, does that happen with all the cycles?
@hannah6736810 күн бұрын
@@averagemaintenance3875we didn’t check the level when it was installed. Yes it happens with all the cycles. Some of the times there seem to be more than the others. Thanks!
@averagemaintenance38759 күн бұрын
@hannah67368 it is easy to check the level with adjusting two front legs, after you take bottomfront cover off, I think you can do it yourself. Good luck.
@talongar788914 күн бұрын
i didnt see it until it got behind the table and i thought it was a moving treadmill
@averagemaintenance387514 күн бұрын
@talongar7889 LOL, it looks like treadmill.
@edward_dantonio14 күн бұрын
You can purchase a new 3rd brake light assembly (part no. 68298380AH LAMP-CENT) for $37.65 from the dealership, at service and parts. Dodge will install it at a labor charge of $30.00. I think the leak problem occurs because if you park your truck outside, the sun damages the gasket seal. So it will need to be replaced every 3-4 years.
@averagemaintenance387514 күн бұрын
@@edward_dantonio Thank you. I will consider that.
@edward_dantonio14 күн бұрын
@@averagemaintenance3875 it makes a large improvement but if you have cracks on the plastic liner above the sliding glass window, the water leak will continue.
@averagemaintenance387514 күн бұрын
@edward_dantonio I have a crack on the plastic liner, and the silicone I applied is working so far. Thank you.
@edward_dantonio14 күн бұрын
@@averagemaintenance3875 thanks, I am going to tell my dealership to do this trick!
@averagemaintenance387514 күн бұрын
@edward_dantonio Thank you. If you remember, share what they say, with the rest of us.👍
@korpcounter0114 күн бұрын
This is what restaurants will get when they no longer can extort the workers.
@averagemaintenance387514 күн бұрын
@@korpcounter01 Agree.
@CriminalThoughts42014 күн бұрын
They prolly charge a delivery fee and want u to tip that thing too smfh
@smvallet19 күн бұрын
Sadly, this didn’t work on my truck, but…Ram just recently extended the warranty on the seals on the fin and lights. I called in and let them know that the seal failed on my back window.I explained that the only way for my window frame to crack on the inside of my truck was if water was getting into the seal and expanding from freezing temps. They replaced it. I didn’t have to pay a dime. I didn’t go through the dealership, but contacted the Ram warranty service directly. They gave me a code to give the dealership to schedule the replacement.
@averagemaintenance387519 күн бұрын
@@smvallet As long as you have it fixed.
@dailygrinders8915 күн бұрын
Was it a recall? My truck is doing the same and my headliner is wet. I also keep shorting out the rear bed light bulbs. I think it’s all from the bad seal???
@smvallet15 күн бұрын
@@dailygrinders89 It’s not a recall. Ram sent out a letter saying they were extending the warranty on the seals on the fin and back window lights. I called to see if they would also cover the window seal and they did.
@averagemaintenance387515 күн бұрын
@dailygrinders89 I heard you could go to the dealer and get it fixed, but different people have different stories. See comments on my video and check out other's videos .Do you homework and than decide what to do. Good luck.
@smvallet15 күн бұрын
@dailygrinder89 My dealer wanted to charge me $1200 plus labor to replace the window. Said there was no way to cover it. When I called Ram Warranty Services, they made the call to cover it and gave me a reference code to give to the dealer.
@gsd321123gh20 күн бұрын
what was the code
@averagemaintenance387520 күн бұрын
@gsd321123gh I am not sure after all this time, but I think it was P0422.
@ginaladner122 күн бұрын
Does this one clean better? What was it about the 5105 that you didn’t like?
@averagemaintenance387521 күн бұрын
I gifted my 5105 to my son and wanted to buy same brand but a little bit simpler due to current prices . Both clean the same good. Old one was more technologically advanced. In my opinion one thing that is better with new one is noise. New one is a little bit more quieter.
@gonzalessolano483022 күн бұрын
El mismo problema tengo yo
@averagemaintenance387521 күн бұрын
Espero que mi video y los comentarios de diferentes personas puedan ayudarte a tomar una decisión sobre qué hacer.
@jams153322 күн бұрын
The torque spec is 14 Ft lbs
@averagemaintenance387522 күн бұрын
Thank you. Good to know.
@jxman1824 күн бұрын
I have watched several videos on cleaning the EZ Trap- this is by far the best one I have seen in terms of information if not production value! Nice job, very much appreciated!
@averagemaintenance387524 күн бұрын
Thank you for your kind comment and for watching. It makes me feel good knowing my videos help someone else.
@HeWentThattaway24 күн бұрын
What is the little plastic valve for that comes with the filter.
@averagemaintenance387524 күн бұрын
For to drain filter casing before taking it off to avoid oil spilling.
@WhatsInaName6824 күн бұрын
Easy. Thanks
@averagemaintenance387524 күн бұрын
Glad to hear that.
@bornhomemade151324 күн бұрын
❤
@averagemaintenance387524 күн бұрын
Thank you for watching!
@cathymandeville295325 күн бұрын
Mine won't unscrew. What do I do??? Help
@averagemaintenance387525 күн бұрын
Are you using the tool like in my video? if no , I highly recommend it. if yes, don't force it. Try to go back and forth with tool to lose it up without braking crossed section in the middle. And don't kick it just apply slow pressure. I hope it helps.
@donaldakin252627 күн бұрын
Either replace third brake light gasket with butyl tape or get the updated light with updated gasket or the problem will still be there. Seal 4 third brakelite screws also (dont forget)
@averagemaintenance387527 күн бұрын
Thank you for your suggestion. It is good to know that.
@gadflyrockАй бұрын
Have you ever found a way to convert it from kilometers per hour to miles per hour? The manufacturer says hold the minus key on the remote and then power it on and it should give you an option but mine never has.
@averagemaintenance3875Ай бұрын
As far as I know, this trademill can't change miles to kilometers.
@gadflyrockАй бұрын
I reached out to the company and they suggested holding the minus key before powering on the treadmill and it would give one the option but that method has never worked for me.
@averagemaintenance3875Ай бұрын
@gadflyrock I will try that when have time. If it works, I will let you know.
@gadflyrockАй бұрын
Really helpful video, thank you so much for posting!
@averagemaintenance3875Ай бұрын
You are welcome. Thank you for watching.
@dianacovaleda656Ай бұрын
Hola buenos días compre el ring dórbell 3 plus y no lo he podido instalar energía tengo 110 voltios que me aconseja
@averagemaintenance3875Ай бұрын
Tiene opción de cableado? En caso afirmativo, siga las instrucciones que vienen con el anillo y mire mi video. Si no es la opción cableada, necesitará instalarla y realizar la configuración.
@krashedfilesАй бұрын
Hey guys, I have a 2011 Toyota Camry SE, with a 2.5K 4Cylinder engine. When the car was first bought by my mom, she was told it was a SEALED transmission and that the fluid was good for the life of the car. Unfortunately, she listened to that claim and never changed the transmission fluid. The car was given to me with around 160K miles on it. Come to find out, it’s NOT actually a sealed transmission. I have heard that you should not change the trans fluid if it’s past 100,000 because it can do more harm than good, but I really want to change it. Should I still change the trans oil? Ik this may be a bit of a newbie question but I’m still learning about cars 🙏🙏
@averagemaintenance3875Ай бұрын
It is definitely risky, and ultimately, it is up to you.. Based on what you say that you really want to change it, you could at least check the condition of fluid by doing what I have done. Take out a small amount of fluid, and put the same amount back. You will refresh the condition of fluid and won't disturbe seals and gears. If all is good, you could do it again after a few thousand miles. The goal is to have fluid redish and not black. Good luck.
@marcospacheco1266Ай бұрын
I want to how long it take to charge the battery
@averagemaintenance3875Ай бұрын
I don't remember the exact time needed to fully charge the battery, but if you are hardwiring the Ring, then you only need to charge it enough to set it up. After that, Ring will be charged through the wires. I hope this helps.
@ritaroadАй бұрын
Wow for the first time I lucked out in that I have practically the same model. The only difference is the settings on mine are on the door, not on the top. The filter is identical and I just checked it. It’s very clean. Dirty dishes go in the sink. Before going into the dishwasher I give them a rinse with super hot water. I don’t put pots in there, just the lids. I usually do a quick wash and dry. Is this a bad thing? Three hours seems too long.
@averagemaintenance3875Ай бұрын
I do the rinsing with hot water and would do quick wash if dishes are mostly clean. If dishes are oily and a bit stubborn with dirt than I would do Normal or Auto wash. I think it is not bad what you doing. Once only I needed to wash it again after grilling because stain could still be seen on dishes.
@ritaroadАй бұрын
@@averagemaintenance3875 Thank you.
@chloeeyre5803Ай бұрын
Lovely set up 👌🍺
@averagemaintenance3875Ай бұрын
Thank you.
@uncianofamily416Ай бұрын
Hello what do you call that strap ? I’m trying to order on etrailer website
@averagemaintenance3875Күн бұрын
Try to search for a Backle and Strap kit. Sorry for the late reply. I did not get notification on your comment.
@sherryberrydc7744Ай бұрын
I just purchased a Maytag dishwasher and this is my first time using a dishwasher. My question is do it supposed to have a little water inside the dishwasher at the bottom after using it. thank you for this video it was helpful. I also need to purchase the mounting brackets.
@averagemaintenance3875Ай бұрын
It is normal to have a little water at the bottom, especially if drying cycle was not used. Mounting brackets needed to be part of package if you purchased it new.
@mseals22Ай бұрын
People kill me with saying this washer is loud. At this price point it is extremely quiet. What you here is the belt driven motor turning the tub. I'm guessing at a high price point maybe that is more insulated from the outside. Mine is so quiet I can close the laundry room door and you don't hear anything elsewhere in the house. Even rooms next to the laundry room.
@averagemaintenance3875Ай бұрын
I think it is about noise tolerance for different people. But you are right about price level. I am glad that you like yours.Thank you for commenting and helping others to make their decision.
@dylandonaghue6750Ай бұрын
It is loud. I am guessing you live in a newer home than mine. My house is over 100 years old and every time the washer fills, those old pipes go klunk klunk klunk! Yes, I do have copper pipes, but it’s an old house. Nevertheless, my previous top load Kenmore washer was nowhere near this loud.
@averagemaintenance3875Ай бұрын
@dylandonaghue6750 I understand. If you have better in the past, it is hard to use it. Like I said in other comments, all this conversation will help potential buyers to make their decision. Thank you for your comments and for watching it.
@claracanovic639Ай бұрын
This video explained it perfect! Thank you so much !
@averagemaintenance3875Ай бұрын
Thank you for watching.
@YrathusАй бұрын
Good soundtrack and good repair trick, thank you
@averagemaintenance3875Ай бұрын
Thank you for watching. I am glad you like the trick. Sometimes, we throw away good things that need just a little love.
@anthonybranch8767Ай бұрын
Thank you appreciated
@averagemaintenance3875Ай бұрын
I am glad you find it helpfull.Thank you for watching.
@mialuthor7597Ай бұрын
Thank you for the video. I dropped mine and the black wire came loose from the silver top. I put it back in butn ow Sperry BT 500 does not work. Any advise to revive it? Thank you Mia
@averagemaintenance3875Ай бұрын
When you put wire back are you sure that wire is connected? If not, solder it together as I did. If connection is good, something else could be bad. Check all other connections, and since you drop it, make sure that nothing obvious is broken. Good luck.
@johncros2281Ай бұрын
Clothes still look dirty it’s not moving. Better to buy FRONT LOAD WASHING MACHINE
@averagemaintenance3875Ай бұрын
Thank you for comenting. I am sure it will help someone to make a decision when shopping for washer.
@gullreefclubАй бұрын
Unless you don’t have room for a front loader
@averagemaintenance3875Ай бұрын
@@gullreefclub Yeah, one of the things to be considered.
@greerjones9791Ай бұрын
What a great idea that's very easy to do! Thank you!
@averagemaintenance3875Ай бұрын
I agree it is a great idea and wanted to share with everyone. It is a good kids' educational project as well. Thank you for watching and commenting.
@greerjones9791Ай бұрын
@@averagemaintenance3875I just made one and it took me all of 10 minutes to do it. I am anticipating a very hot summer this season and I want to supplement my solar drip irrigation system to protect my Urban balcony garden from the heat. I will be making many more to put into my containers.
@averagemaintenance3875Ай бұрын
@greerjones9791 Awasome, you already made one. I heard about very hot summer across the country, but looks like we both will be ready.👍
@jamesbroderick9106Ай бұрын
Simply the best egg maker out there. I boil the set of eggs and it went like crap. The wife reminded me that she had the shack. And the next 14 eggs came out perfect easy to peel
@averagemaintenance3875Ай бұрын
I agree.
@quinncawley2787Ай бұрын
Thank you!
@averagemaintenance3875Ай бұрын
You are welcome. Thank you for watching.
@parkforest434Ай бұрын
Thank you, very helpful!
@averagemaintenance3875Ай бұрын
I am glad you understand and find it helpful. Thank you for watching.
Genuine Toyota oil filter part number is 04152-YZZA1.
@user-ys9xn8xg9l2 ай бұрын
I saw that you connected power to the 2 screws, but did you then leave the internal Battery isolated or did you remove the transit plastic pull piece to power up the battery also?
@averagemaintenance38752 ай бұрын
I did not do anything with the battery. I did what you see on video.
@alittlecookoo2 ай бұрын
This was probably one of the best maintenance videos for thebEgo thank you!