Covid caused issues for selling; by the way the cardo slim is a pile of shit that does not connect with other manufactures HJC 90 are no better than Sena Impluse and it doesn't have coms. HJC claims the 90 helmet is mostly silent in the wind --not true I ride an indian roadmaster darkhorse. There are no perfect helmets out there for everyone. just saying you are destroying a good helmet with your Fed-Up Review.
@brandonleal40098 күн бұрын
Thanks for the video man! Doing a 49 mm triple tree conversion with Legends cartridges this week
@skylarsmith787613 күн бұрын
They will only warranty it 1 time. Just found this out as my 2nd set burnt out
@jsingle558316 күн бұрын
So what's the latest with this? It's a yr later
@solointhephilippines17 күн бұрын
Hi Thanks for the Video. I picked you because I thought maybe you put Starlink on your motorcycle. I plan to try and install Star link onto my rear tourist box. I see videos for starlink On Cars on Suvs on Rvs but have not seen starlink on a bike. I have a motorcycle in The Philippines and plan on riding though Asia. Do You think I could mount it on the back of my Bike? I do not plan on riding fast there. Thanks BTW how long is the cable that comes with it ?
@BUILDEMTORIDE17 күн бұрын
My boss who I was setting this up for, just got offered a mobile version of starlink, like you would set up on an RV, he hasn't received it yet, but im curious to see what it looks like. I'm sure you could mount it to a motorcycle with custom mounts, I would just be concerned about keeping it safe while on the move, since the dish has motors that auto angle it.
@solointhephilippines17 күн бұрын
@@BUILDEMTORIDE I do not want to use it while riding. I would keep it in a case. I would just use it when stopped. I rode 10 island and like 60 different places in the Philippines last year. Many did not have internet or cell service. But I would mount a bracket to the back of my tourist pack and use it from there.
@BUILDEMTORIDE17 күн бұрын
@@solointhephilippines yeah, I figured you wouldn't be using it while riding, I meant just keeping it safe while transporting.
@DetroitMuscle31318 күн бұрын
so do you have to lose all motor mounts in order to adjust this ?
@BUILDEMTORIDE18 күн бұрын
@DetroitMuscle313 yes, and put a newspaper or multiple layer paper like item, so the rear tire can tilt freely
@DetroitMuscle31316 күн бұрын
@@BUILDEMTORIDE sp did you ever fix you high speed sway on your bike ? I got 2024 SG and that drive me crazy I cant enjoy my bike to the fullest , at high speed I get that side to side dance
@fuknmovin22 күн бұрын
So now that its been a while what do you really think of this setup? I really like the ide of an enclosure for the mids, in car audio it makes a BIG difference in the tone of the speakers, they typically sound fuller
@Eastbay360024 күн бұрын
I have the tool and did what you told me but I can’t get it to turn to accessories mode and on any advice
@petemathieson33326 күн бұрын
1 5/8” freeze plug in the crossover to block off works great
@walliamir7680Ай бұрын
So which modular helmet is good?
@BUILDEMTORIDEАй бұрын
I haven't been fortunate enough to test a large variety of helmets. I'm working on it though. I'd love to test a Shoei or Arai in the future since they seem to be very well regarded in that modular helmet segment.
@walliamir7680Ай бұрын
Thank you for the honest review I purchased my Sena Impulse helmet about a year and I use it a few times here and there but unfortunately the intercom system crushed during my trip to Thunder Bay Ontario. I was searching on KZfaq how to get this helmet fixed. I came across to your video. The worst part is I cannot listen to music or call. I am so pissed right now.
@BUILDEMTORIDEАй бұрын
Sorry to hear about the problems, that sucks.
@0873spАй бұрын
Hello. My switch went bad. I replaced it but i can't clear the code from the ECM so i ordered another one. Anyone else had this problem?
@BUILDEMTORIDEАй бұрын
I dont ever remember clearing the code, rather just that the light went out. So I'm sorry, I can't be of much help.
@ChippychrisAusАй бұрын
Excellent Video mate! Lovely looking bike. Could you pass on the details of the oil pressure gage setup you are running there, I was thinking about doing something similar.
@BUILDEMTORIDEАй бұрын
Absolutely, it's from A1 Cycles. www.a1cycles.net/oil-pressure-gauges Thank you!
@ChippychrisAusАй бұрын
@@BUILDEMTORIDE Thank you kind Sir!
@greenmarine5Ай бұрын
Forward controls need 2" spacers on a Dyna for comfort or you'll be forcing your legs in around the air filter cover. Don't blame the bike for your lack of research and common sense
@BUILDEMTORIDEАй бұрын
If that's the case, why wouldn't the spacers be built into the forward controls....... or come in the kit? These are almost a direct copy of the factory forward controls for a dyna..... Next, if it wasnt for her requesting forwards, it should have stayed mids....it's a dyna. Thanks for the comment! I appreciate it!
@jorgeacevedo3207Ай бұрын
Ruroc is trash
@BUILDEMTORIDEАй бұрын
I think they have work to do, you gotta remember how young the company is compared to Shoei, Arai, Bell, ETC. What's your preferred brand and model of helmet? Thanks for the comment!!
@arizonarider6998Ай бұрын
So would all this be the same if replacing the springs with progressive ?
@BUILDEMTORIDEАй бұрын
As long as your just doing the springs like SKU 954868 on revzilla, yes. If you were doing cartridges it would be different.
@arizonarider6998Ай бұрын
Ok thanks I’m doing just springs . Thanks for your video and quick reply !
@thedeserttrek23Ай бұрын
What size is the nut for the clutch assembly?
@BUILDEMTORIDEАй бұрын
I couldnt remember right off hand, but i was able to see the socket size in the video (it was hard to see except on my larger screen) Its 30MM Thanks for The Question!
@darkman80222 ай бұрын
I just put my cover on yesterday It still was kind of a pain in the azz but the tools you used and I did purchased really helped thank you
@guyutemitchell60392 ай бұрын
I'm.lookkng for a scanner that will do an ABS brake bleed - any suggestions?
@BUILDEMTORIDE2 ай бұрын
This Daytona twin tec is probably the cheapest option at the moment www.partsgiant.com/p387593-daytona-twin-tec-twin-scan-ii-diagnostic-tool?m=562129&gad_source=1&gclid=CjwKCAjwi_exBhA8EiwA_kU1Mgd519cE55WQghSH_SjzmeiFyPp5bT8VG9m-o-aUG7JhoIX7eUez0hoCcjEQAvD_BwE
@crumbcake112 ай бұрын
The speakers suck that's why
@BUILDEMTORIDE2 ай бұрын
They were better than my Ruroc Shockwave for sure, as far as clarity and volume. This is the HK speakers in the helmet so i knew they would be better than the shockwave non HK speakers.
@jimmyp64432 ай бұрын
Pingel fuel valves
@BUILDEMTORIDE2 ай бұрын
The pingel was a bit more than he wanted to spend, I ended up going with a similar design to the pingel from Dennis kirk that was more in his budget. Thanks for the watch and the comment!
@dicktrickle76082 ай бұрын
Okay thanks. I put a piece of 1/4" brake line in a vice, and smashed it just enough to fit it in the lock. Italian style. Makemyownie.
@BUILDEMTORIDE2 ай бұрын
Necessity, the mother of all invention!
@andrewlafontaine95792 ай бұрын
How’d you do the conversion?
@BUILDEMTORIDE2 ай бұрын
I just removed the crossover pipe and slip on, then fab'd a patch to block off the crossover, welded that on, and removed the restriction plug from the fuel moto jackpot slip on.
@geomad78122 ай бұрын
Would this whole process also apply to my 2020 XL1200 forty eight, it has 49mm forks as well.
@BUILDEMTORIDE2 ай бұрын
The 48 uses cartridges, so it will be different. This video is more of the traditional style fork setup used on the touring bikes. I dont know if one fork will have a cartridge, and the other one be set up just like mine. Sorry I couldn't be more helpful
@geomad78122 ай бұрын
@@BUILDEMTORIDE no worries, I appreciate the insight
@MegaMarclar3 ай бұрын
Sort of the same thing I ran into with my Autel maxisys ultra for cars... advertised to do this and that, hardly does anything. 5500$ mistake.
@BUILDEMTORIDE3 ай бұрын
Wow. That's insane.
@FinCityFL3 ай бұрын
Just wondering why didn't use the Amazon lights? Was there an issue with them?
@BUILDEMTORIDE3 ай бұрын
I just ended up liking the look of the other lights better, even though the Amazon lights kinda matched the look better. I do like the sequential function, and honestly they probably wouldn't have required bag modifications either because of how the wiring is ran.
@FinCityFL3 ай бұрын
@@BUILDEMTORIDE yeah I like the wire coming off the side better. I didn’t want the wire in the bag. Thanks for the info I just purchase the Amazon ones.
@ws52413 ай бұрын
Same thing happened to mine and i just super glue it back. Good as new.
@BUILDEMTORIDE3 ай бұрын
I spent $500 on the helmet, they better fix it in my opinion, but it looks like they did the same damn thing haha 😄
@trustedpro23 ай бұрын
I've had mine for a year and a half they've already went bad contact with manufacturer that warranty them but you gotta pay for shipping which I think is garbage so I'll never buy him again I'll only buy custom dynamics from here on now
@BUILDEMTORIDE3 ай бұрын
Thank you for sharing Your experience. I cant actually remember if I paid for shipping when one of mine went bad
@justinbennett17523 ай бұрын
Hello and good morning! I was wa n ing to ask if the bags are still holding up good and if you are satisfied with the quality after a few months? Thinking about trying the company to replace my front fender and bags.
@BUILDEMTORIDE3 ай бұрын
They are holding up great so far. They are considerably lighter in weight, and a bit flimsier when you flop open a lid, and besides the latches like I mentioned in the video, not having the same flick as HD, they are good!!
@justinbennett17523 ай бұрын
@@BUILDEMTORIDE Thank you for the fast response! Have you heard anything about their fenders by chance at all? The storm in GA last night brought down a tree and damaged the front fender and looking for a good and affordable replacement.
@BUILDEMTORIDE3 ай бұрын
@justinbennett1752 sorry, I have not heard anything about the fenders.
@justinbennett17523 ай бұрын
Thank you for the help!!
@FinCityFL3 ай бұрын
@@justinbennett1752 I just placed an order for my front fender on 04/08/2024 for my 2016 Road glide special black quartz. I haven't received it yet. I sent them an email for a status today which I haven't seen a response yet. I think it was on back order. The odd thing is they already got my paypal payment. Some companies won't bill you until it's shipped. Just FYI
@jasonfiet96323 ай бұрын
Have you now noticed radio interference when the charging cord is plugged in?
@BUILDEMTORIDE3 ай бұрын
I honestly haven't listened to FM radio on the bike much at all to really notice. I ran a shorty antenna that got great reception but i still never listened much, but then I removed the antenna completely. So im sorry, I can't really say for sure.
@richarddodds93263 ай бұрын
I got the same one just to get the 250 straight six double hump valve cover 2V carb good running engine gonna re power a farm tractor
@BUILDEMTORIDE3 ай бұрын
So what are the plans for the truck then? I have some big plans in the works for the C10, they just arent moving as quickly as id have liked.
@richarddodds93263 ай бұрын
I'm 63 and I had an old Mac Tools charger like that took by a burger and have been looking for a good replacement, just saw this yesterday and I got to get one.
@BUILDEMTORIDE3 ай бұрын
The replacement has been great so far, ive used it to jumpstart tractors and trucks with larger diesel engines with no problems.
@richarddodds932615 күн бұрын
Those will be overpriced and hard to get from now on. My only comment is I wish it had copper wire transformer and built-in voltmeter.
@tommyhunter96413 ай бұрын
I had to use a Pingel petcock on my shovel with a Super E
@abzs58113 ай бұрын
All these grown ass men be whining about this helmet 😂😂😂
@BUILDEMTORIDE3 ай бұрын
It happens with everything, but if you really wanna see whining look up ruroc on reddit, it's so bad on there.
@chuckg5543 ай бұрын
Did you have an issues with it bottom out and hitting your swing arm?
@BUILDEMTORIDE3 ай бұрын
It hasn't hit the swingarm, I have ohlins on there, but I also haven't had a passenger on since I installed them either. However my rear brake line moved and that got cut in half between the swingarm and the bar
@jimsullivan3063 ай бұрын
WHY AFTER SPENDING A HIGH PRICE FOR A MOTORCYCLE A CUSTOMER HAS RE REENGINEER A BIKE FOR HARLEY.
@BUILDEMTORIDE3 ай бұрын
In school for HD they briefly teach you about powertrain alignment, and the touring bikes used to come with this style of adjustable mount from the factory, so really you're not re-engineering, just putting it back the way it should have stayed lol
@arthurcutaiar99943 ай бұрын
Because harleys are magical. They magically open your wallet. And magically shut down customer service
@shadowork_3 ай бұрын
Thanks for the helpful tips. Whats the Torque specs for these bolts? Having a hard time finding that detail. Doing the job later today
@BUILDEMTORIDE3 ай бұрын
Thank you. It's great to hear that I can help in any way. I included the torque specs in my original install video. Thanks!!! kzfaq.info/get/bejne/gbeIetanrru8nXk.html
@shadowork_3 ай бұрын
@BUILDITTORIDE thanks for the speedy reply I really appreciate you!
@DeadRoman4 ай бұрын
Honestly, I feel like these have made little, if any, difference in the handling, and lots more vibes.
@BUILDEMTORIDE3 ай бұрын
Their purpose is to reduce swingarm flex vs the rubber mounts. I don't think they eliminate it completely, and it's possible to have other problems affecting handling. But yes lots and lots of vibes lol
@dmac27034 ай бұрын
Best video hands down on RG fork seals! Listen to this guy! Buy the press at least, you will need it to get the fork caps back on. I bought a cartridge kit from @progressivesuspension1984 and their install videos lacked any newer touring installation information. Thanks!
@54Bob4 ай бұрын
Right now my bike is sitting in a wheel chalk. Do I have to put the front wheel to the left lock position to realign my ignition
@BUILDEMTORIDE4 ай бұрын
Shouldn't be necessary.
@Crazeejay4 ай бұрын
Thanks for the video! I just bought the tool to have but managed to get things aligned with a screwdriver before I got it.
@BUILDEMTORIDE4 ай бұрын
Yeah, I've heard mixed success with a screwdriver to realign. I'm glad you didn't get stranded and were able to get it done with the screwdriver!
@glennwingfield86814 ай бұрын
No need to remove the left side bolts since the flanges on that side are slotted.
@BUILDEMTORIDE4 ай бұрын
I disagree, if you loosen, partially, or completely remove a bolt on a vibration factory like a Harley, I recommend cleaning threads on both ends, especially if loctite is or has been used.
@thomastrevino77344 ай бұрын
All you need is the extended Allen key ball head
@BUILDEMTORIDE3 ай бұрын
I could not get my ball Allen to seat enough that I trusted it on the ones closer to the cylinder.
@lidiomotos63544 ай бұрын
great scanner served me super cheap and useful
@BUILDEMTORIDE3 ай бұрын
Im glad to hear it worked for you, but unfortunately what they claimed it did, they lied about for my use case.
@shawnmiller63354 ай бұрын
I spent 700.00 On my track version and its so small I can.t even put it on my head not to mention shockwave I order with it wasn't in it when It arrived. No 800 number only emails just redicolous costomer service one email the guy says losen chin strap it'll help the fit? What part of it's so small It would fit a toddler would make someone say loosen the chin strap for better fit when you can't even get the thing on your head? I just want my 700.00 dollars back but I belive I got F by this company Beware fellas beware I won't ever deal with company ever again
@BUILDEMTORIDE4 ай бұрын
Thanks for sharing your experience, it's important for people to know about when considering a purchase.
@rochelledobusz92534 ай бұрын
Just caught your video and I had the same issue
@BUILDEMTORIDE3 ай бұрын
That's to bad, sorry to hear about it. They just announced the new EOX helmet which seems to be a replacement for the Atlas, I might give that a try if i can swing the ask.
@Rob.D.5 ай бұрын
Did you check or change your swingarm bushing out to polypropylene? 1/16 could be warn bushings?
@BUILDEMTORIDE5 ай бұрын
I went with M3 Street Performance Isolators a Year earlier. But inside the swingarm itself, I haven't done anything yet. kzfaq.info/get/bejne/bpego8ZhsZOcZok.html
@LukeTPZ5 ай бұрын
What is the bracket you have your Quadlock mounted to, please, brother?
@BUILDEMTORIDE5 ай бұрын
It's an Iron Aces Speedshop Mount. Unfortunately I found out from another commentor, that they went out of business a few years ago. He was able to find one someone was selling on a road glide forum.
@Roaddawg685 ай бұрын
This tool is a must have for the price it's a no brainier .