@bsfunk44 The yokohama version has a fusion pro, agfrc servo, dlux brass knuckles, 21%OD lightweight machined gears, 5.25" jconcepts scorpios w/squid inserts, and amazon wheels. The sparco is my buddies, I know it's a fusion pro, powerhobby servo and the hyrax lp's.

@dubbleportion It has both

@philthy5058 what tires you running?

@dubbleportion I'm running 1.9 ruptures on the poizd and my buddy has 2.2 tusks on the gshot

@@philthy5058 gshot was the blue one ?

@@dubbleportion gshot is the orange and grey

@@RCTeamAustria Thank you!

@@rustysglass Thank you!

@christopheresper6144 Yes it is. It's a Gspeed v3 with treal capra axles, Amazon 3 gear with dig, fusion pro, 3brc g13 pro servo, Dravtech shocks, in the works rc links for an scx10iii gladiator. Let me know if I missed anything.

Nice man thanks for the reply. I’m new to it but got hooked already with the stance. I just ordered the brazin scale frontline chassis and links for it, need to find an outrunner and get the vfd stubby going. When it cools down I need to get up there, looks awesome! I’m in Rio Rancho

@christopheresper6144 Nice! I've been curious about some of the aftermarket chassis for the VRD but it's been so good on the stock chassis I'm afraid to change it. I run a few holmes crawlmaster v3's with revolvers, a few rhino v80's with various outrunners, and 1 HK hobbies esc and outrunner, the holmes is definitely the best but the HK Hobbies is really good and a little cheaper. Hit me up if you ever make it up this way.

Thank you! I run SL3D squid inserts in just about everything.

13.75"ish

Thank you!

Thank you!

Yes they are

The pro is only available in 2300kv

H10 has a considerably longer wheelbase than the capra so the breakover isn't as good but it does have its advantages. Stock vs stock I found the H10 to be much less frustrating to drive than the capra. My capra is a long ways from stock now so I couldn't do a fair comparison.

@@philthy5058 well find a stock one and do a comparison

The VRD is a great truck you won't be disappointed. This is up in farmington.

Hello neighbor!

It's certainly not the most capable rig I've got but it might be the most fun. Thanks for watching!

Thank you!

Thank you! It's got a fusion pro, agfrc servo, wheels and tires with sl3d squid inserts and brass rings in the front.

@@philthy5058 thank you , looks like it works very well .

@@gregloser1090 It's a really fun rig.

How big of a difference did the brass clamp rings make

@user-ho5vm9rv1e it's definitely noticeable. According to the scales it's about 2% more front bias.

Thank you!

Northwest New Mexico. It is a really fun spot and only a tiny fraction of what we have available.

@@philthy5058 man that looks perfect for crawling. Right on that's a trip from Colorado 🤜

@GrimSpeedFPV Only about 45 minutes from Durango. If you make it down this way hit me up.

Thank you for watching!

Thank you! We had a great time running these trucks.

The man himself 🤯 ! Thank you for watching.

​@philthy5058 heck man, this is killer. I shared on our group page, my personal page, and other cheater groups! Very well done brotha.

@@Poizdrc Wow, thank you. I put the build list in the description

@Poizdrc It would be great if you could do a video with setup tips for those of us that don't do Facebook or Instagram.

🔥

It's still needs tuning, hopefully I can get it to the level I think it should be.

kzfaq.info/get/bejne/q6-fg7dzvLyUdZs.htmlsi=VbLGjHWHJARbbKtj This video has the basic build list in the description.

@@philthy5058 thank you sir!

@@kennethleungs let me know if you need more details

Some skill, sometimes just get lucky

We have some of the best rocks in the world for RC and full size crawling within minutes of home. Thank you for watching and subscribing.

@@philthy5058 You are welcome!

It's the Jconcepts stage killa

@@philthy5058 Thank you. Have a new build and looking for an appropriate body.

@@marknauman53 Nice! Best of luck with the new build.

Thank you!

Hello Malaysian friends! Happy to have you here! Thanks for watching.

welcome@@philthy5058

Thank you! 13" is on the short end of what I usually build, and yes it mainly because of our terrain but also because I don't do comps so I'm not worried about dodging gates. These tires are the powerhobby/jetko grabbers, they're just a standard 4.65-4.75" 1.9 tire, I run the standard 4.75" sl3d squid inserts in them. I have a set of the injora pins as well and they are a narrower tire, I use the green injora inserts in mine.

Thank you!

AMK 1/10 Transmission Aluminum 2Low Transmission Overdrive Gearbox Set for 1/10 RC Crawler Comp Builds SCX10 II Element Gspeed LCG Chassis SCX10 II Upgrades Accessories a.co/d/8po8M1n. Here it is, all I did was take it apart and grease it before I ran it.

@@philthy5058 awesome did it have pins on the shaft or the gears pressed on

@@sprather84 I really can't remember for sure, I think they were pressed on.

Thank you for watching!

They have SL3D squid inserts. Roboslugs? Haven't heard of those, I'll have to check them out.

Nice! I actually just ordered a set of these tires and the SL3D inserts as well not even an hour ago lol

@Josh4G absolutely killer combo, you won't be disappointed.

@@philthy5058 one more question quick, how wide are your wheels? I ordered a 35mm wheel but was wondering if a 25mm option would be better!

@Josh4G those wheels are 30mm wide injoras. They seem about perfect.

All but the one, and still not good enough to make your 4ws crack.

I guess that means your next build is 4ws!

@mech883able nope, don't have the talent. Still trying to figure out dig 😅

😂 you can do it bruv!

Thanks man! Are you going to get some electronics in the cricket soon or do I need to send you a 1080 and a holmes motor?😆

😂😂😂😂have a 1080 in cabinet and a HW fusion which was the plan but it doesn’t fit. Idk was going to print my own chassis after having a printed chassis now see how easy and have access to good printing.

The green injora silicone inserts

Done. Let me know if I missed anything.

Those are the power hobby/jetko grabbers and they are awesome.

@@philthy5058 wow they look good to thanks man

It has servo on axle. I got a VRD carbon for Christmas, as soon as the weather and work cooperate I'll put them head to head.

Thanks Arrty! I made these. They are the practice set from a couple used sets I had before i start cutting up new ruptures. That new cricket looks wicked.