this is one of the best videos about this topic I've seen in all yt guys 💪💪💪
@TheRenaissanceBuilder3 күн бұрын
Damn thank you very much for those kind words!
@Jackgamer200311 күн бұрын
That would be awesome!
@mikemorgan428020 күн бұрын
Hey. Nice job
@TheRenaissanceBuilder20 күн бұрын
Thank you!
@WilkesyGlass20 күн бұрын
God, i wish i could pull over every lifted truck and show them this video. No, the work does not end when the lift is in and tires on, it ends when the supporting work is done
@ChrisDonnelly314120 күн бұрын
my car has a dial to aim the headlights down, a lot of new cars have it but so many people don’t use it, i hate getting blinded by the new halogen and LED lights that have the whitish/blue colour to them, so many people have their lights straight up and its blinding
@mickeyjohnson508120 күн бұрын
I absolutely hate when people drive with bright lights like that. And some do it on purpose!
@Vic.PALETOSO20 күн бұрын
Thank you sir. I was today years old when I found this out. I drive ima lowered Silverado. At a 5/8 drop. Now I won’t bother people at night. 😊
@TheRenaissanceBuilder20 күн бұрын
Thank you for the veiws and kind words!
@annelinailstarter257420 күн бұрын
And teslas are the worst offender at this. Their lights Are always horrible
@trace913020 күн бұрын
I always aim the driver's side down and the passenger side up slightly. Add some good bright LEDs. I hardly ever feel like I need my brights on and noone has ever flashed at me.
@jesseholden868620 күн бұрын
I remember the headlight aiming kits, always sat on top of the alignment computer.
@HolzMichel20 күн бұрын
plot twist: the local dunkin donuts team shows up and starts demanding ID and arresting bro for "suspicious activity"
@TheRenaissanceBuilder20 күн бұрын
That would be funny
@chadw496920 күн бұрын
Notice .... there was no actual mechanical adjustments made..... It's very difficult to do on the more modern plastic enshrouded sealed units... One might even say , impossible, on some models.....
@slappyrats20 күн бұрын
Oh yeah that's a setting you turn up all the way so people move out of your way right
@tyler94220 күн бұрын
Every single lifted truck owner needs to see this video
@zombiebaker20 күн бұрын
People now adays dont even know how to change a tire, let alone this. They would rather wait hours for a tow than do it themselves
@Kcburnit20 күн бұрын
This is all too common and police officers need to start making a stop for this. If every other vehicle you pass flashes their high beams at you that means your headlights are aimed too high
@bok..20 күн бұрын
Thing is in most places there really is no law regarding headlights and brightness. You just have to have them. I'm pretty sure the only classification of high beams is the wide angle they project the light.
@wigwog959020 күн бұрын
@@bok.. Light color is monitored and after market modification headlights are illegal if they aren't the exact same as the manufacturers. It's in the DOT regulations.
@bok..20 күн бұрын
@@wigwog9590 yes light colour makes sense same with after market. These new SUVs and cross overs being higher up than the average sedan makes the sedan driver blind, even with OEM headlights.
@TheRenaissanceBuilder20 күн бұрын
That depends on the state, as an inspector for pensilvania i can say that pa does have those laws but New Jersey and new york do not
@woof22521 күн бұрын
Full video on this maybe? Neat stuff!
@TheRenaissanceBuilder20 күн бұрын
Deal!
@andrewmannino929421 күн бұрын
Thought you were tagging “tits” on your cousins double wide
@andreykhazhevskiy323021 күн бұрын
And if they flash them on and off, maybe check yours.
@dbackscott21 күн бұрын
I heard the manufacturers aim them a bit right on purpose to help keep from blinding oncoming traffic. Do you know if there’s any truth to this?
@TheRenaissanceBuilder21 күн бұрын
@@dbackscott it is standard to bias the aim towards the passenger side to help oncoming traffic yes
@brianboverhof188020 күн бұрын
Headlights are usually aimed towards the passenger side. It is even recommended to put some tape over the side of the right side headlight when visiting countries with left hand traffic, but I don’t think Americans encounter that situation as often as Europeans
@Tehblood20 күн бұрын
they sure could aim em a bit lower from factory
@sinephase20 күн бұрын
@@Tehblood yeah modern LED lights are a bane of my existence when driving at night LOL
@ajahniepemberton186021 күн бұрын
To every lifted truck in Florida, please watch this video my eyes can’t take it anymore
@omarjassar465021 күн бұрын
I was thinking of making a copper box and soldering copper tubing coiled to it in front of a fan and vented outside Also CO2 detectors will not work because CO2 sinks
@moejr1423 күн бұрын
Did it lift the rear of the burb a little because of the perches?
@TheRenaissanceBuilder23 күн бұрын
Solid question thank you! Yes it did, the new axle spring perches are about one inch taller than the originals, so i used a leveling kit to make up the difference
@moejr1423 күн бұрын
@@TheRenaissanceBuilder was it about an inch of lift
@MrFdoter26 күн бұрын
Turn your fan around
@TheRenaissanceBuilder26 күн бұрын
Thank you for watching and commenting! I see what your trying to go for but it doesn’t really matter, in the sense that its a co2 deathtrap no matter what you do. This was literally just for fun.
@d.smithim8306Ай бұрын
Question for the crowd. Can you use silicone instead of the PVC cement to install all PVC pieces together ? This seems to me, like each individual connection would now have a slight cushion effect due to the silicone vs hard connection ? Bad/good idea ? Of course it would need 24 hrs or so of setup time before you could kick the pump on.
@tbell615425 күн бұрын
It could possibly work on the return side..........MAYBE.........But definitely notn on the pressure side !!
@TheRenaissanceBuilder25 күн бұрын
I do not recommend using silicone, the pvc glue is the best and the vibration isolation is unnecessary. The design of the double 90 joint allows for expansion and contraction of the pipe
@je-fq7veАй бұрын
All the more reason for a drain. CO2 goes to the lowest point and would flow thru a tube probably 1/2" at least I.D. Probably need to be insulated to keep it from condensing moisture out of the air like the other pipe.
@TheRenaissanceBuilderАй бұрын
Thank you for watching and commenting. Unfortunately this whole video was just for shits and giggles, theres no way to make this design safe.
@frankortolano5886Ай бұрын
Lasco from lowes
@thogevollАй бұрын
A third type of auto-tech uses both. A high input impedance multimeter won't put a load on anything. This is essential for verifying powers and grounds.
@thogevollАй бұрын
Are you sure how you are pronouncing its name? I think they pronounce it like pocket-pro because it fits in your pocket.
@TheRenaissanceBuilderАй бұрын
I think you are correct, since working with there developer team i have changed how i say that way now aswell
@marilynwardАй бұрын
All I could see is your back side and horrible loud music that was overtaking the voice. Had to just quit watching and find another video
@angelaharrison2632Ай бұрын
I’m so glad I saw your video!! We were going to use the cooler a/c in the car for a trip with dry ice, what a disaster that would have been
@TheHomieJoseАй бұрын
Thanks was about to order to save me some bucks now ima get the oem 😂
@TheRenaissanceBuilderАй бұрын
I definitely highly recommend going oem, but there also very hard to get right now so best of luck for sure. Ive learned a few things about all the ls pcv stuff over this so im making a larger video about it soon.
@billiebobbienorton2556Ай бұрын
Gracias my friends, I was looking to do this and glad its not an Intex pool video. I'm sick and tired of the damn flex hoses cracking at night while my filter pump is on, ruining the pump because there's no water and burning up the pump bearings ! ! ! AND the don't get me started on the hoses leaking at the clamps 👍👍👍
@TheRenaissanceBuilderАй бұрын
Interesting, I hated those flex hoses for flow alone i did not realize they also went bad so fast. Thank you
@TechNickSecurityАй бұрын
Appreciate the review! Specifically that you covered the accessory clip pack. There aren't a ton of pictures of the accessories so it's really tough to get an idea of fit or even a general sense of build quality. Thanks to your review I've ordered (2) Pokit Pro's and (2) accessory packs. Keep up the good work!
@TheRenaissanceBuilderАй бұрын
Thank you very much for the kind words! I hope you really enjoy your meters!
@kimdesrochers3178Ай бұрын
Thank you for this! We're hard piping ours today because we're tired of all the soft hoses breaking at the worst times; never fails. This was really helpful.
@TheRenaissanceBuilderАй бұрын
Fantastic and thank you for watching and commenting! I wish you the best of luck with your project!
@pwf269Ай бұрын
Thankyou guys, this is exactly was i was looking for. excellent instructional video.
@TheRenaissanceBuilderАй бұрын
Thank you for the kind words and good luck with your projects!
@RayRayTheWeekendWarriorАй бұрын
I don't care what all the Karen's say, I say good video!
@TheRenaissanceBuilderАй бұрын
Thank you! Your kind words are appreciated!
@MoGumboFukUTubeForChngngMyNameАй бұрын
Dude, you just made a gas death chamber machine. I know you made your CO2 disclaimer… but remember who your audience is here 🤡
@jayyoutube8790Ай бұрын
What’s that plastic piece for? just some kind of baffle for the PCV valve?
@TheRenaissanceBuilderАй бұрын
So the plastic assembly is baffaling to seperate the oil similar to a pcv. In my research i have found that almost non of the ls engines have had an actual “pcv valve”. The early ls1 up to 2002 had a valve but it was only a restriction and after that they went to just baffled valve covers. The ls6 unit is supposed to be the end all solution but apparently the chinese knockoffs are just terrible.
@jayyoutube8790Ай бұрын
@@TheRenaissanceBuilder ok, I see… lesson learned. Thank you 👍🏻
@xarykim_mcАй бұрын
Hi Ren :D
@TheRenaissanceBuilderАй бұрын
Hi Kim!!!!!!!!!
@user-zp6dd2uz6e2 ай бұрын
It's a shame we can't see any of what you are doing because the camera is in a horrible spot.
@TheRenaissanceBuilder2 ай бұрын
I understand, we made a newer video to make up for this one being less than ideal. kzfaq.info/get/bejne/oZOha6SKtZ2WiY0.htmlsi=9e233TFuIrd5hkDU
@Pondiver2 ай бұрын
I appreciate content like this. Good info.
@TheRenaissanceBuilder2 ай бұрын
Thank you the compliments and thank you for watching, i hope it helps!
@sallyfeeney71282 ай бұрын
How did you connect the pump to the filter?
@TheRenaissanceBuilder2 ай бұрын
There is a factory supply coupling between the pump and the filter.
@liaa.072 ай бұрын
For anyone wanting to buy this. Its very good heating up and soldering the only problem for me was that after the second use i couldnt use it longer than 1minute then it would just turn off. I think it doesnt charge the battery right anymore. Maybe a loose contact so be careful
@Findmylimit2 ай бұрын
I could die from things all day long and it wouldn’t be 100% my fault. Dying while dissecting the magnetron because you told said do not means I would’ve atleast died in challenge! Now that’s meaningful.
@Findmylimit2 ай бұрын
I could die from things all day long and it wouldn’t be 100% my fault. Dying while dissecting the magnetron because you told said do not means I would’ve atleast died in challenge! Now that’s meaningful.
@ajarreaux2 ай бұрын
Thanks just what I need to hear. My peg was snapped into the wheel
@TheRenaissanceBuilder2 ай бұрын
Thats why i made the video, i stressed out hard, so im hoping to save others the stress. Thank you!
@simonilett9982 ай бұрын
Witch?? Is this a video in which we'll see goblins and broomsticks too??🤣🤣
@TheRenaissanceBuilder2 ай бұрын
I wish! But you would be surprised how much more attention a video gets when stuff isnt quite right 😉
@simonilett9982 ай бұрын
@@TheRenaissanceBuilder Maybe we need a magician to fix that🤣👍
@NytefogNJ2 ай бұрын
I love magnets too HVAC brother! I’ve got magnets on so many of my tool and test equipment! I love the ProHold from fastcap for holding screws & fasteners on my M12 Fuel drill/Driver and tool bag.