Those simple sunshade tops can get expensive, that's a good buy. That fabric will hold up fine, sometimes if it gets too much air pushing up under it, it can get a little stretch in the middle though. Good job!
@spinfish14343 күн бұрын
@@kimberlytaylor3738 I still have to do a real test out on the water. Thanks for the information regarding the fabric.
@JuanRivera-lj5lu3 күн бұрын
Nice price point 👌🏾
@JuanRivera-lj5lu3 күн бұрын
Awesome my guy!
@saltyric8 күн бұрын
Great vid. I just bought the exact boat to refurbish. What paint did you use for the panels you made, to match the McKee blue? Thank you
@spinfish14348 күн бұрын
The paint I used wasn’t an exact match. I polished the Gelcoat and took a close up photo. I used that at Home Depot, found the closest match and had them mix into a durable exterior paint.
@saltyric8 күн бұрын
Excellent. Thank you very much
@robbymacoutdoors.625019 күн бұрын
That looked like a fun day!! You guys slayed them!! Great vid. 👍👍. Hope all is well Spinfish. The boat looks great
@spinfish143419 күн бұрын
@@robbymacoutdoors.6250 Thanks!
@ClaytonLeu25 күн бұрын
Good going guys awesome
@alwaysbentfishing26 күн бұрын
Pretty work!
@robertmoody222126 күн бұрын
Awesome 👏
@riccomorroy252026 күн бұрын
Wow! Nice catch @Spinfish1🎣🐟
@jasonsmith780926 күн бұрын
Good Job Guys. Great day out there!
@ricailonggasajumareka876426 күн бұрын
Great job guys. Great job Patrick. Nice job on your video SpinFish. 😮
@KathP020826 күн бұрын
nice catch! thanks for sharing! 🐟🐠
@cbrusharmyАй бұрын
What is that thru-hull fitting for near the bow?
@spinfish1434Ай бұрын
@@cbrusharmy Drain for the forward anchor locker.
@rocketsurgeon_Ай бұрын
Did mine today, I was wishing I had smaller hands to get that back connector off though. Thanks for the video.
@lanicaninz9519Ай бұрын
very informative!
@Jennylyndean26Ай бұрын
👋
@sauer1928Ай бұрын
I know this video is 4 years old by now but do you think a late 90s early 2000s Outrage 23ft would be safe for offshore fishing?
@spinfish1434Ай бұрын
Yes, absolutely! Just pick your days always check the weather. They’re very capable and designed for offshore.
@sauer1928Ай бұрын
@@spinfish1434 thank you so much!
@riccomorroy25202 ай бұрын
Nice work Spinfish1👌🏾
@brandywineangler67482 ай бұрын
Plans to repower and put her on the water or just going to sell the hull as is and leave the rest for someone else?
@spinfish14342 ай бұрын
It sold a few days after it was finished. I didn’t repower it.
@bellevue2602 ай бұрын
Looks great!
@spinfish14342 ай бұрын
Thank You!
@Chilipal2 ай бұрын
Excellent work, great attention to detail. That console turned out mint.
@brendonsimmer6232 ай бұрын
Can you get on plane with one motor to get home in the event one motor stops working offshore?
@spinfish14342 ай бұрын
I’ve never tried to get on plane with one engine. I might try the next time I’m out in it? It will still get me home on plane or not on plane.
@Jennylyndean262 ай бұрын
Wow
@user-ph4xj3ur1i2 ай бұрын
Fat aboard
@alwaysblessed10372 ай бұрын
Is the show this weekend?
@alwaysblessed10372 ай бұрын
Nice. Glad to see you posting again..
@spinfish14342 ай бұрын
It was Yesterday but there should be a Show in Ocean City MD this summer.
@spinnaker55142 ай бұрын
Hi, I was wondering if you saved the mold?? I'm thinking about building a similar Boston Whaler, Currently I am living in North Carolina on trawler. At the end of the month, I will be moving up to Connecticut and selling my trawler. I'm looking for something smaller as I am partially disable to fish on the Connecticut River in season. Wonder if you would consider building another console or sell the mold? I think a fifteen might just be the right size boat that I can handle myself!
@spinfish14342 ай бұрын
I sold the mold to FasseCo. He restores Whalers and is located in TN. Checkout his website FasseCo.com
@sellerz173 ай бұрын
Boss can you show how you installed the front bench latches. Thanks!!!
@riccomorroy25203 ай бұрын
Nice to see you back Spin Fish1🖐🏼
@craig52224 ай бұрын
When the music kicked in around 4 min I thought my Spotify was playing. Good tunes and great footage. Y’all crushed it
@EvolveVoIP5 ай бұрын
Great Boat!
@kCI2515 ай бұрын
How did you mount the Tempress seats?
@slmed875 ай бұрын
Great stuff, still running the mirage props? If so what diameter and pitch if you don’t mind.
@gregpopp48475 ай бұрын
Ive owned a 1979 15 since 1989 - it was freshly restored when I purchased her but I spent so much time on her that the mahogany bleached out so I gutted her and refinished all her woodwork. I resisted doing it for quite some time because I didnt want to convert her into a "bass boat" but I broke down and custom built a carpeted deck for the front end because as you know that area is difficult to utilize. Seeing other sports is almost like looking at my girlfriend in someone else's driveway. Beautiful job on your rebuild !!!
@ralphparker5 ай бұрын
what year was your hull?
@spinfish14345 ай бұрын
It’s a 1984
@ralphparker5 ай бұрын
@@spinfish1434 Thanks,
@deanbawden8196 ай бұрын
My 1968 dellquay dory is flawless brits make the best boats
@spinfish14346 ай бұрын
Dellquay Dory is no longer in production for a reason… If it were flawless or the best wouldn’t it still be around? 🤷♂️
@stevepeppers5606 ай бұрын
End of video shows a thru hull eyelet for towing. You can find online.
@TheOffCycle7 ай бұрын
Should have just used polyester. Epoxy was overkill and now you are stuck using it. Can’t put polyester on epoxy.
@spinfish14347 ай бұрын
Polyester is no good below the waterline. If you know how to apply these materials in a particular order you’ll have no issues. (Watch it again there was no Polyester over Epoxy). 3 years and still looks like new. Take a marine fabrication class.
@davidhunt20247 ай бұрын
Great assessment. I love my 25 t and the couple small cons you addressed have been fixed on ours (2021). I would still rather have your style console though
@spinfish14347 ай бұрын
Thanks for watching!
@kCI2517 ай бұрын
Would it be stronger to bond the two layers of Coosa board together before installing it as one piece?
@spinfish14347 ай бұрын
We bonded the Coosa together with a sheet of 1708/Epoxy. If we had done it before it would’ve made it more difficult to get it completely inserted in the transom pocket. It’s extremely strong and there are no cracks of any kind in the transom or well areas.
@lawrencefranck94178 ай бұрын
Well done. This boat seemed the perfect candidate for a pour in the transom.
@spinfish14348 ай бұрын
Oh no pour in, Coosa is far superior material.
@MIHfishing8 ай бұрын
Where was this at?
@spinfish14348 ай бұрын
NC
@MIHfishing8 ай бұрын
How far out? We are in little River and trying to go after monsters
@kCI2518 ай бұрын
Nice work. Would a center support joist below the board have helped prevent the crack?
@spinfish14348 ай бұрын
I don’t think so, my repair has held up fine all year. I think it just lacked some adhesive in that joint. Still looks new.
@James-wb3gu8 ай бұрын
Great video! Really enjoyed seeing examples of the pros and cons of the boat. What year is the hull?
@spinfish14348 ай бұрын
It’s a 2005, I got it new in 2009. It was a leftover that sat in a building for 4 years when I found it. That’s a whole other story.
@coastalworldwideshorts8 ай бұрын
Thanks for a great video- we are over in the panhandle looking to upgrade our offshore boat! This was a big hep. heading over to the motor performance video now!
@spinfish14348 ай бұрын
Thanks for watching, Please Subscribe!
@robertmoody22219 ай бұрын
I love our 25t very very economical boat and extremely fast . Great video
@spinfish14349 ай бұрын
Thanks for watching and the comment!
@Nicolai889 ай бұрын
Just me or the male was in the "she is my women" mode? Looks like he is challenging the cameraman 😂
@spinfish14349 ай бұрын
I was wondering the same thing, that’s why I kept moving, seemed like he didn’t like my presence.
@Nicolai889 ай бұрын
@@spinfish1434 a great encounter of the males in nature :)) best video today for me 😉