Given how they painted over the buttons, how would you know that its not set to Timber mode? Timber mode uses lower torque.
@robster778723 сағат бұрын
Comparing tools to Milwaukee on a demo is useless. If you really want to convince someone, you have to let them bring their own power tools of equivalence.
@BigDipper7923 сағат бұрын
You’re one of a select few that know how to do that.
@Little_FymthКүн бұрын
Neither wouldve loosened if you slapped it and said that aint going anywhere
@perrys9872Күн бұрын
Dewalt was on low impact 😅
@robster778723 сағат бұрын
Its an atomic series, the setting changes are done by pressing the button. Since they painted over the buttons, you legitimately cant tell if its set to Timber Mode or Wrench Mode. Timber mode uses lower torque.
@ToolsMethodsPhilosophiesКүн бұрын
For $279 that’s looks nice.
@TxToolGuyКүн бұрын
it’s been solid. there’s other options out there but this one is a little more compact, me having a 4runner and not a truck this is perfect for space saving.
@gilmansgarage6341Күн бұрын
Very nice..
@TxToolGuyКүн бұрын
thanks! super handy to have. especially since our shop driveway isn’t paved yet and we have lots of lifted vehicles come in
@gilmansgarage6341Күн бұрын
@@TxToolGuy love that extension feature..my yard is rough to..
@RamboBlood-bw8ey2 күн бұрын
Quit making someone else Rich and become better then them
@RamboBlood-bw8ey2 күн бұрын
Half that money spent on tools could of been used for a nice vacation a new car a new home instead.
@RyldUp-uo3pc2 күн бұрын
the super soft hammer is great for popping in trailer/truck lights! highly recommend for other HD techs
@TheChiefCoin3 күн бұрын
Milwaukee is best
@Servant-of-Christ883 күн бұрын
Yea put it against the cheapest one you can find.. DeWalt does the same thing but better
@ExtremeDeathman3 күн бұрын
DeWalt, Milwaukee, Hilti, Makita, Bosch Blue, they all seem to be very tough but all also have problems.
@brian923453 күн бұрын
That painted dewalt had a low battery
@saulborjas5123 күн бұрын
I don't see a dewalt there who knows what it is
@Jon64293 күн бұрын
Swap sides ;)
@Spiritualwarfare5874 күн бұрын
They are to expensive not worth buying
@SilentCanary4 күн бұрын
I fucking love this channel!!!!!
@TxToolGuy4 күн бұрын
appreciate it man!
@stsautodesigntools4 күн бұрын
Love me my half sized sockets. Good old rustt🎉
@TxToolGuy4 күн бұрын
glad that ain’t me homie 😂
@BipVuongAnCapTheMuaMayBayXao4 күн бұрын
9/16 buddy
@TxToolGuy4 күн бұрын
9/16 would likely work too, but being a toyota/lexus tech i don’t keep a lot of SAE around so these do the job just as well.
@sasquatchrosefartsКүн бұрын
@@TxToolGuyyou need 1/4 through 5/8. A person could have a bad alternator right in front of your shop. And you could fix it in ten minutes if you had six sockets.
@gilmansgarage63414 күн бұрын
Or in my case Maine rust a 15mm can become a 14.5 really quickly 🔥
@TxToolGuy4 күн бұрын
yep that’s also another great use for them!
@AdriftAndAtPeace3234 күн бұрын
That’s actually a pretty ingenious idea. I have a 1/2 size wheel flip socket set that are worth their weight in gold when you really need them. Wasn’t aware astro made them in a standard shallow
@TxToolGuy4 күн бұрын
these are a fairly recent release from them. the 1/2 size lug sockets are money. i love mine
@AngelRodriguez-ky5vf4 күн бұрын
Ive been working with dewalt for about 7 months at my job cuz they supply impact drills 3 of them have burnt out just putting 3/8 tec screws but fuck it thier free and aint mine lol
@glenforehand5 күн бұрын
Cool channel! I recently got an X431 Pro from a test group. It’s been excellent and really surprised me on a recent simple add fob task. I found out it can way more. My Autel KM100 was stumbling and the Launch was clutch!
@TxToolGuy5 күн бұрын
i really like my launch! i had an autel as well and my launch can do way more.
@vickiehovatter41375 күн бұрын
Interesting.
@leonhilburn30995 күн бұрын
What year model dewalt id like to know
@raymondromero45585 күн бұрын
What that foam measure out to ?
@PackNshipp5 күн бұрын
The show models are modified
@WhyDidYoutubeDoThis5 күн бұрын
The gray one is definitely a dewalt
@ToolsMethodsPhilosophies6 күн бұрын
I would love to see a detailed wrench draw video.
@TxToolGuy5 күн бұрын
i have a full cart and full toolbox tour on my channel!
@ToolsMethodsPhilosophies5 күн бұрын
@@TxToolGuy thank you. I checked them both out. Your channel is one of my favorites. Keep up the great work and feel to ignore this request but a more detailed deep dive into your wrench drawers would be interesting. Which ones you like and dislike and why. How much they cost versus quality. What you might get if you were only DIY. How often do you actually use wrenches?
@TxToolGuy5 күн бұрын
@@ToolsMethodsPhilosophies appreciate it man! and that’s a solid idea. i will keep that in mind
@ToolsMethodsPhilosophies6 күн бұрын
I need the reasonably price version of this. I wonder if harbor freight sells this?
@kyokushin22296 күн бұрын
Creating a worse one to make the other one look better, thats how advertising is done🤌🏻
@gracianoortaquintero92706 күн бұрын
Muy bueno, pero muy caro acá en México 😢
@RamboBlood-e9h6 күн бұрын
There all made by the same manufacturer using different dies with different names.and styles. Even Snap On are made in China. Look at today's Snap On no USA stamp on them that's how you can tell that it's made out of country.
@SKANK_HUNT496 күн бұрын
😂 poor fella didn't have a dad growing up
@TxToolGuy6 күн бұрын
lmao how is your comment even relevant to this short?🤡🤡🤡
@philiphpurcell55747 күн бұрын
Will it work on 2013 Lincoln mkz
@TxToolGuy7 күн бұрын
yes
@Code3258 күн бұрын
Do you like the Topdon or the Launch better?
@TxToolGuy7 күн бұрын
tough call. they both use launch based software but my launch is more capable, but it’s also a higher end than my phoenix lite
@Code3256 күн бұрын
@@TxToolGuy Yeah you’re right, it does seem like the better deal for anyone that needs to do reprogramming. As far as the interface goes though, say you’re just doing a test drive and you want to graph a few PIDs at the same time and record them, which one are you grabbing?
@TxToolGuy6 күн бұрын
@@Code325 probably the launch because it can graph multiple at once. i think the phoenix can as well, but i haven’t tried it to verify.
@TxToolGuy6 күн бұрын
@@Code325 keep in mind though the launch is also $2200. and the phoenix lite 2 is on sale for $662 this week so there’s a huge price difference
@herazka8 күн бұрын
Hell yeah.
@stsautodesigntools8 күн бұрын
If you have a battery powered tool, we have you covered and magged!,
@Nmatenum4208 күн бұрын
Don’t magnetic 🧲 fields mess with batteries or am I wrong ? I’ve always kept them separate am I crazy?
@TxToolGuy8 күн бұрын
never had an issue. snap on has offered magnetic battery boots for years and used those until these came around.
@Nmatenum4208 күн бұрын
@@TxToolGuy great thank you I’ll look into these for sure 👍
@Diabloshado8 күн бұрын
Real question is why do dewalt guys even exist anymore.
@robster778723 сағат бұрын
Because without them, Milwaukee will be like Apple.
@rexisretro8 күн бұрын
green theme you got going on is awesome
@TxToolGuy8 күн бұрын
appreciate it 🤘🏻
@theshareman37310 күн бұрын
They are coming out with the light 3 now. What do youthink is the difference? Ive been looking i to getting one but now dont know if to get the 2 or the 3.
@TxToolGuy10 күн бұрын
So the lite 3 comes with topology standard, lite 2 you have to add topology for $100. but not everyone wants topology, personally i love it. but next week this goes on sale for $662 so if you ranted to add topology for $100 you’d still be under $800. the lite 3 is $858. the lite 3 also has can-fd on the mdci and the lite 2 is the mdci lite
@dystopiandream713410 күн бұрын
Milwaukee are fall apart tools.
@austinm605610 күн бұрын
This is what I use daily . It rips pretty much anything you will need it for .
@PedalTheGlobe11 күн бұрын
Do they make these with a circular bite to easier get around brake lines and such? I buy them from Harbor Freight but looking for better quality.
@AdriftAndAtPeace32311 күн бұрын
Lifetime warranty Made in 🇺🇸 > 2 year warranty made in 🇨🇳
@monster...............11 күн бұрын
So, with is the other gun cause that gun could just be weak as hell
@gilmansgarage634111 күн бұрын
Biggest question is durability, will it hold up to the hammer..✌..very nice though..
@TxToolGuy11 күн бұрын
solid point! i’ll know soon enough and update you guys if it doesn’t hold up 🤘🏻
@a-a-ron487011 күн бұрын
Its the same damn thing. I feel like you will buy, whatever the salesman tells you to buy.
@TxToolGuy11 күн бұрын
in this example, yes, they’re similar, but a lot of people have the spring type clamp, air hammer, and this would be a perfect upgrade for them. All I have is a Snap-on air hammer and that’s all I had to make the video with.