This is an awesome build! Can’t wait to hear it run what made you pick a 4r70w vs a 6 speed?
@aandamustangs12 минут бұрын
Thank you! And you'll see why in a future video 😉
@mathewmorrison49072 күн бұрын
This is an awesome build!! Can’t wait to hear it run!
@freddie10032 күн бұрын
Why do mine flicker when on?
@LightningTheRaiden984 күн бұрын
Dude, why not a 5.7 R/T, 6.1 SRT8, or a 6.4 SCAT??
@chaseb43953 күн бұрын
Because those engines are garbage 😂 And discontinued that's why😂
@jamesbasye23624 күн бұрын
😂why a coyote, i hate those engines, in the f150 those things burn up oil like clockwork even seen a few that had oil soaked air filters, point is theres a half dozen far better engines you could have put in it, what is so special about a coyote?
@michaelskrhak65184 күн бұрын
I’m going to argue and say you drive something Ls related. Never had issues with cyotes
@jamesbasye23623 күн бұрын
@@michaelskrhak6518 i work on coyotes more than i do ls engines🤣the reason is because they have more problems, not only that theres a lot of youtubers going viral for problems with the coyote. Even multiple ford techs make videos on their problems. Do you work on fords on a daily basis? If your answer is no than maybe you dont know what you are talking about. Ive seen a 2021 ford f150 with 55,000 miles and a 5.0 L coyote that had an oil soaked air filter and barely had a single drop on the dipstick, this isnt the first time either, with these trucks i always check the dipstick before service because the majority of them ive worked on are almost dangerously low, does being 3 qts low despite performing routine maintenance raise any red flags for you?
@jamesbasye23623 күн бұрын
@@michaelskrhak6518 bet you anything ive been under the hood of more coyotes than you. What year of coyote do you prefer?
@jamesbasye23623 күн бұрын
@@michaelskrhak6518 also how many miles have you put on a coyote?
@Oksiwa5 күн бұрын
hey man, we want to invite you to review the latest taillight for 04-08 ford f150, how to contact you?
@@aandamustangs Thank you, I sent you an email, please check it
@BoDiddlydodah6 күн бұрын
Do these fit both supercrew and styleside models?
@Welcometofacsistube6 күн бұрын
Disgusting. Keep that pherd boat anchor out of that e body.
@davidronan16776 күн бұрын
I just can't get behind a dodge with a Ford motor i don't no why
@jamesbasye23624 күн бұрын
😂i know why, its because ford engines suck unless its deisel
@chaseb43953 күн бұрын
@jamesbasye2362 😂you can't get behind a motor that finally was built correctly.? How much does it cost to make a thousand horsepower with a chevy or dodge motor 😂 You should be glad that he put an American engine in an American car and not some foreign goofy.Six cylinder in it just saying bud.
@jamesbasye23623 күн бұрын
@@chaseb4395 you are right they fixed the problem on the newer coyotes,
@townhall054466 күн бұрын
If Dodge was smart (and with Stellantis running it, they're not) they'd dump that outmoded pushrod two-valve Hemi and develop their own version of the Coyote. They hate to give up that magical 'hemi' name though it's now just obsolete.
@jamesbasye23624 күн бұрын
Getting rid of the hemi makes perfect sense, using the coyote design to copy off of makes no sense because they have there own set of problems
@user-wx9mh1qe2b7 күн бұрын
Pretty sweet, interested to see it run.
@Freddy_Confetti7 күн бұрын
Tragic
@RunFaster0117 күн бұрын
Thanks mang. About to do mine.
@carbonfibercreationswashin72138 күн бұрын
Gosh damn your going to have haters
@raymondphair-ej5ko8 күн бұрын
Was it hard y attach the power cord?
@mahammadshariff425710 күн бұрын
What a placement to put a oil filter, should have been up the ass of the designer😂😂
@NickiTerantino101111 күн бұрын
That motor looks to be running terribly the way it's shaking and i hear a vacuum leak in the beginning of the video which could easily be causing the idle issues. That's a great car to have, i hope you got it running better now. Ty for the video
@bboos6711 күн бұрын
I just finished doing this fix. Before soldering, there is a conformal coating on the pins that should be taken off. When I took off the coating, the solder was broken on the pins of all the LED connectors. I resoldered them and added more solder (hopefully it will help with strength). I had been seeing issues with the speed and fuel gauge, but the temperature gauge pins were also cracked. My display works excellent now. Thanks for the video, it gave me enough information to fix my issue.
@friedoreo89612 күн бұрын
I dont like you
@albertoluna219511 күн бұрын
Like you could build anything better 😂
@friedoreo89611 күн бұрын
@@albertoluna2195 “she is very gorgeous to me” head ass
@NewEdgeDesigns13 күн бұрын
97-01 Camry are probably the most dependable car ever made..
@Ideal.WhiplashTV16 күн бұрын
Absolutely love this car man, im saving for one now. I had a 66 sport fury when i was 16 and im 18 now but had to sell it.
@HPTBANDIT20 күн бұрын
What headers are you going to run with?
@aandamustangs19 күн бұрын
Theyre just some headers for a 11-14 GT from ebay were going to make work.
@JSK92011 күн бұрын
@@aandamustangsit’s a coyote you dont need anything fancy to make them sound amazing
@kmr788321 күн бұрын
You selling the big block?
@ReedSpeed9627 күн бұрын
Thanks for the help man! Sweet Mustang!
@kylebishop931329 күн бұрын
I’m definitely grossed out by putting a dumb ford motor in a dodge
@tammyhill908727 күн бұрын
I totally agree 😂😂
@kylebishop931326 күн бұрын
@@tammyhill9087 yea no kidding
@kylebishop9313Ай бұрын
He just killed mopar
@gerezvrАй бұрын
American drip 💧
@CryptoManiac1776Ай бұрын
I noticed on the ford website it says 5.7 quarts for 2.3 ecoboost
@ryanliesse4706Ай бұрын
Excellent breakdown with minimal intro and no BS. Thanks for the fantastic step-by-step. Great vid. Ordering a screen now.
@fordsixhoe1184Ай бұрын
Been thinking about doing this to my 2014 Challenger. My dad was all Mopar, and me, I was all FoMoCo. I have had a few Mustangs. But deep inside I loved Mopar as well. When he passed away, I bought dodges, and then the Challenger. So, this would be a tribute to mh dad. He would turn over in his grave, but get a laugh, because it's me...
@greg20152015Ай бұрын
Ummmm. What??? 7.5k?? Who on earth sold it for that and do they have another one lol?
@Mopar318Ай бұрын
Stupid
@HPTBANDITАй бұрын
Im curious to see how this turns out
@ThomasSek-xj2kfАй бұрын
Does anyone know the part number for those plastic clips? I have a 2016 Maxima and I’m missing some
@ecobooster8298Ай бұрын
Thanks!! Take a look at my videos of my 2020 Explorer! You can mod yours too!! PEACE!
@kaiasworld3546Ай бұрын
Followed this video and it worked! Thank you to Ford Motor Company for making what could’ve been a two second plug-in process a complete pain in the arse.
@mylesminor69362 ай бұрын
How do you get that panel off
@164hozey2 ай бұрын
Let it fly
@1shorte4wssj212 ай бұрын
WHAT COLOR TOOL DID YOU USE FOR THE BOTTOM HOSE FOR THE EVAP. I HAVE THE SAME DISCONNECT TOOL SET BUT NON FIT RIGHT.
@aandamustangs2 ай бұрын
I'm pretty sure it was the black one, it barely fits around and I had to fight with it a bit. I had my brother wiggle it while I did pressure with the disconnect tool and it finally released.
@1shorte4wssj212 ай бұрын
thank you i ended up getting it. thanks for getting back to me.
@bobtomlins89292 ай бұрын
My truck is at the dealer right now for the same problem. It is going to cost $3000 to have it fixed
@3000gamer12 ай бұрын
Not all that into cars but the caption made me think about how much I’m trying to compete with people, subconsciously!
@didokan2 ай бұрын
At 12:30 What that clicking noise the explorer 20-23 makes?
@999benhonda2 ай бұрын
Will be doing a 2/3 drop on a 2007 soon. I don't see the need to go lower, just enough to make the stance look meaner and make getting stuff in/out of the bed easier.
@G.Harley.Davidson2 ай бұрын
GT-40p heads wonT work with these
@jack-zq3bj2 ай бұрын
W mans
@dylanrays52 ай бұрын
How often should I change the cabin air filter?
@darrylsmith78712 ай бұрын
I completed an oil change on my 2023 2.3l this morning, and I have a comment - I didn't fully remove the panel (at 5:16 in your video). Instead, I left the three rearmost screws in place and hinged the panel down out of the way. Saved a couple of minutes. Thank you for this video, and thank you for the suggestion that I get a set of panel fastener pliers. It made the job a lot easier. I wish I had taken your suggestion about using the oil filter box to catch the oil - I made a real mess!
@choncoconcos59122 ай бұрын
How often do I have to change them. Mine is a 2015 ford fiesta 1.6 with 97000 miles
@delvinishman772 ай бұрын
@AandA How to add OilChange on CarFax? I don’t see F150 video??
@coyko802 ай бұрын
It’s like water because it’s GM shit 💩 oil Acdelco