I had a similar issue with my deck handle not being where the directions said it was, but I didn't have to cut the handle off or drill anything. 2019 ultra cut series 3
@rodneygreen62527 ай бұрын
Who sells the grass flap I cannot find one for a 52 in grandstand
@GrassFlap7 ай бұрын
The GrassFlaps are available on our website, www.grassflap.com
@stevenchamlee6600 Жыл бұрын
Having a issue. The flap won’t stay open?
@fitchesbass2 жыл бұрын
Installing as we speak. The video shows the easy parts of putting bolts in. All the time consuming parts and confusing portions are glossed over. No clue what the deflector angles job is intended for. I aligned the plastic flap to the bottom of my deck (scag TT) and now the deflector interferes with almost the entire hinge assembly.
@GrassFlap Жыл бұрын
Derek, sorry for the late reply. If you are still having trouble with this please email [email protected]. The deflector angle is supposed to be installed between the plastic blocker plate and hinge plate. The deflector angle helps to block clippings from shooting up onto the operator when the unit is partially opened or when it is opening or closing.
@glenngow39762 жыл бұрын
This video is made by the man who actually invented & manufactures the GrassFlapp.
@marvinhenderson74202 жыл бұрын
Will the grass flap work on the Cub Cadet ZT1 54 inch deck ??
@stephennorthcutt88743 жыл бұрын
I’ve got one and bought one for my dad for Father’s Day. Very good investment
@jeremywilson83343 жыл бұрын
Great video, thank you!
@hermandavidson90693 жыл бұрын
Slow down
@shadowsanddust23 жыл бұрын
Do they fit any walk behind?. I use an 36 inch ex mark
@daflea663 жыл бұрын
No half open? =(
@mcd40593 жыл бұрын
Super Product
@Nahhmah4 жыл бұрын
I just installed it on my vride 2 and don’t know why it won’t open all the way up when pedal is fully pressed. It only goes half way and when pedal pressure is released it just closes. Should I tighten the spring more? The spring is already very stretched.
@grin644 жыл бұрын
What about having to dismount in an emergency and tripping or catching on that foot pedal? Someone gonna get hurt and it's gonna be a lawsuit
@Benpepper44 жыл бұрын
It looks like someone already this question, but I don't see a response?! which model does the Raptor SD require?
@GrassFlap4 жыл бұрын
Benjamin, it depends on what year your mower is. If it is a 2018 or older you would need a 45R50-5L. If it is 2019 or newer, you would need a 46R50-5L. You can also use the product finder on our homepage to enter your mower information.
@emccallum10124 жыл бұрын
Just bought one and installed in place of the pos power chute I had. I havent used it yet, but I already like it better! Well built and the new ones seem to have some good changes over previous models.
@dinokarakostas64074 жыл бұрын
What if you want to put on the grass gobbler to collect the grass
@GrassFlap4 жыл бұрын
Hi Dino, the Grass Gobbler can still be used with the GrassFlap in the open position. Thank you!
@OldAndGettingOlder4 жыл бұрын
You should demo how you curve the flap as this would be necessary on my Ferris.
@GrassFlap4 жыл бұрын
Hi Stanton. You can see an example of how to heat up and form the blocker plate around the 45 second mark in this video, kzfaq.info/get/bejne/fZ96oLB2ud-lhn0.html Make sure to heat the blocker plate up slowly so it does not crack. If you still need any help please feel free to contact us either by email or phone. Thank you!
@biggunn7705 жыл бұрын
Will the bagger chute still mount to the deck with the flap on? It didn't look like it would in the vid.
@Helloreality1015 жыл бұрын
Ah, too damn fast
@kellytrees5 жыл бұрын
Do they make one for the Ariens Ikon 52 in zeroturn mower?
@regiswschulz5 жыл бұрын
Awesome
@calebholz59805 жыл бұрын
Can you put a catcher on it with the flap installed on this mower?
@JamesZ10255 жыл бұрын
Subscribed :-)
@gregorymandile23216 жыл бұрын
How big is your mower deck. I look at a 52 and it didn't have caster wheels on the sides of the deck, I notice your mower has them
@gregorymandile23216 жыл бұрын
nice work. good luck with your new machine,that's a sweet machine
@duramax.6 жыл бұрын
Just ordered mine. Cant wait to get it. Super excited. Thanks David
@nickisabelle7246 жыл бұрын
Does it make sense to get the mulching blades with the grass flap?
@mikerailey11115 жыл бұрын
My opinion is yes
@jonzimmerman66566 жыл бұрын
Thank you for the worst fucking instructions ever. I now have to find some other video that allows down enough for me to follow. I but your product... And I get these instructions? Thanks for nothing
@kennyplay59826 жыл бұрын
Question. We were wondering why you don''t make a flap for the Super S Hustler 36"?? thanks
@GrassFlap6 жыл бұрын
Unfotunately, the deck does not leave enough room to mount the GrassFlap over the discharge chute.
@jasondow31037 жыл бұрын
I have four of these over all I really like them. My only complaint is I have broken three of the cables. I would love it if you could make a thicker cable for them.
@GrassFlap6 жыл бұрын
Jason, sorry to hear you are having problems with the cables breaking. If you would like to contact me directly, I will be happy to work with you to resolve the problem.
@jasondow31036 жыл бұрын
GrassFlap I have a ferris 52" stand on and a wright stander x 52" what length cable do I need to order
@james-jl2ej7 жыл бұрын
What kind of blades do u use on all your mowers? Do you use gator blades or just the stock blades
@wandarichmond39777 жыл бұрын
david your a loser I sent your junk flaps back to you you wanna short me 200 dollars of myrefund ,keep it people buy a quickchute this guy is a charater
@james-jl2ej7 жыл бұрын
Why not just keep it closed all the time so u can mulch up all the leaves without having to go over it?
@popvultureinc50074 жыл бұрын
Mow two foot tall grass with that closed and see how much fun you have.
@Southwell_137 жыл бұрын
If they were a little cheaper I would buy one. Best chute blocker iv seen
@brandonslawncare5907 жыл бұрын
Will it work on a 42 and 36 model
@massob96427 жыл бұрын
I know this video is old, but does anyone have a video of the Raptor Grassflap in action?
@wandarichmond39777 жыл бұрын
junk junk cables break weekly
@GrassFlap7 жыл бұрын
Wanda, sorry to hear you are having problems with the cables breaking. Typically, cables fail due to improper routing. If you would like to contact me directly, I will be happy to work with you to resolve the problem.
@JamesZ10255 жыл бұрын
Would like to see a heavier cable like exmark uses on their OCD
@danielserrano21417 жыл бұрын
whats the grassflap for the raptor sd called i need one for my raptor sd
@jimmyearp1587 жыл бұрын
Will this also work on the Hustler Raptor SDX , it has the open deck and has the brace across the top of the deck.
@savagefox207 жыл бұрын
Yes it will. I just put one on my SDX yesterday. You just remove the 3 bolts and take the part of the deck with the brace off. The grassflap then fits perfectly. Works awesome. It was money well spent.
@massob96427 жыл бұрын
@Jimmy Earp @savagefox - How are you liking the SDX? Haven't been able to see one in action. Any vids of it?
@jimmyearp1587 жыл бұрын
I ended up buying the Bobcat XRZ instead of the Hustler.
@massob96427 жыл бұрын
Nice on the XRZ. A lot more mower than I need.
@turdsandwicher6 жыл бұрын
Is it possible to have it in a half open position? I like the idea of being able to close it but having it wide open is going to shoot grass/rocks everywhere. I think it would be good if you could still keep the original deflector on somehow when the its open. I know they said you can feather it but is it hard to do while operating? Thinking of getting one.
@jelawnlandscapingllc27377 жыл бұрын
were can I finding
@raerae13177 жыл бұрын
nice piece of equipment. will that fit a 32 48 and 52" mower deck
@944own7 жыл бұрын
Does the flap stay closed good when running through heavy leaves?
@grasscutter887 жыл бұрын
How come my grassflap just shoots the grass out straight underneath the flap? It's not any different than discharging. My only thought is because it's winter time and the grass is thinner this time of year?
@GrassFlap7 жыл бұрын
grasscutter88 You are correct about the thin grass.
@grasscutter887 жыл бұрын
So are you supposed to lower the cut during the winter time then raise it back up once the spring growth starts again?
@benmcvey51757 жыл бұрын
GrassFlap any way to get one of these to work on a Exmark Vantage due to the folding platform?
@OFFICALWOLVERINE0077 жыл бұрын
I have a ferris pro cut would your product work on it
@ruenellrudison18027 жыл бұрын
NICE WORK RUDISON LANDSCAPING LLC
@Alex.AL_267 жыл бұрын
Would I be able to use a grass catcher with the grass flap installed or do i have to remove the grass flap to use a catcher?
@JTEBEAST8 жыл бұрын
My concern in with removing the pulley cover to clean and aid with removing the blades
@southerntide42608 жыл бұрын
put some G6's on her David it will do the job like none were ever there now I have a cam - action cam up to 4K res be expecting videos my new one was good point of view of GF in use. I will be adding some later for leaves was going to try G5's no sense in it bc my G6's still have life on them
@southerntide42608 жыл бұрын
Another thing you see why I leave my custom install of my 3M the way I do (NOTE: I did have to notch it with cutters around the OEM chute welds but still original 3M) so it will discharge blowout straight backand exhaust will disperse a lot of it why my right wheel is brown lol I sent you the email Can't believe I have right on 600hrs in a year solo ugh I would be over 1,000hrs without my grassflap #1 and 2nd my JD trash kit
@turdsandwicher7 жыл бұрын
what are g6's?
@southerntide42607 жыл бұрын
turdsandwicher Gator Blades, made for mulching www.oregonproducts.com/pro/products/oep/G6.htm