3 ай бұрын
6 ай бұрын
Пікірлер
@godzilla6490 4 күн бұрын
Is that Plastic?
@treyduval5399 5 күн бұрын
Just trying to tweak the settings on mine. What are your retraction settings in the slicer you are using? I’ve been trying 1.5 with an acceleration speed of 35 mm but some have been doing a lot less retraction and say it’s not necessary. What are your thoughts, it looks like your prints look great!
@IlanPerez 10 күн бұрын
wow. looking forward to see the progress on this.
@boundlessperception1466 10 күн бұрын
Thank you hopefully will have them done by the end of the week.
@J_Seven 13 күн бұрын
i am always amazed how wonderful your projects turn out.
@boundlessperception1466 13 күн бұрын
@@J_Seven thank you. Praying the final product looks good
@JustGee3D 13 күн бұрын
good job bro, those are MASSIVE!!!!
@boundlessperception1466 13 күн бұрын
@@JustGee3D lol thanks. Hope the finish looks good on them
@dariussteele3843 14 күн бұрын
You sir have inspired me.
@boundlessperception1466 14 күн бұрын
I'm glad :)
@ZombiePotatoSalad 14 күн бұрын
Scaling is weird. So... the model in Blender is measured in meters, but the slicer program measures in millimeters. I want to insert a 1/8 inch metal rod through the model (it's a katana, so it's thin). However, I cannot quite convert the size of the rod relative to the size of the sword, especially when the measurements are messed up like this.
@boundlessperception1466 14 күн бұрын
@@ZombiePotatoSalad so when I'm unable to get an exact measurement I slice the model with a hole I think works and print a small section of it. Something that only takes 5 to 10 min to print. I see if the rod fits and adjust accordingly. Hope this helps you
@ZombiePotatoSalad 14 күн бұрын
@@boundlessperception1466 Like making a test ring for a helmet. Good idea. The other part is making a channel that follows the curving of the blade, through the spine. The rod is flexible, so that helps.
@ZombiePotatoSalad 14 күн бұрын
@@boundlessperception1466 The measurement should be easy enough. It's making a consistent hole through all the blade pieces of a katana, and the channel I'm cutting follows the curve of the blade.
@theultimaneard 15 күн бұрын
I love the foam kingdom key, only thing I would hand is make the hand guard gold, but I don’t know how to get around that.
@triple_check 17 күн бұрын
Hey can you give me the link to buy the stick that you put inside the medigun to stabilize it?
@johnt3776 22 күн бұрын
you had me at Epyon!
@4rthur160 24 күн бұрын
Hello, (Comment translated, sorry if there are translation inconsistencies) I prefer to have a metal Keyblade for more strength and longevity but it's impossible to find one, the only Keyblade still on sale which are made of metal but I hate them (the keyblade in the video the handle is too thin while the real keyblade is thicker) There are a very large number of foam Keyblades and I would like to have some for decoration (not for fighting or playing) except that I have the impression that they are not even strong enough to keep them for several years on a wall Finally, I'm trying to find out if the foam keyblades are resistant.
@morganmaker776 25 күн бұрын
So you'r telling me that i shouldn't use the filament reload / unload option like every sane person would, but just feed... Dude if that works ❤❤❤❤❤ Had some huge prits mess up because of filament runout, tried it with filament reload and the printer killd the print every time
@boundlessperception1466 25 күн бұрын
@morganmaker776 This video was made before that update was released. But yes now use the load reload option.
@priamgivord469 26 күн бұрын
we can't see half of your menu man... can infer but it would nicer if it were fully framed :), anyhow thanks for posting anyway, nice one and easy to search for!
@JustGee3D Ай бұрын
Ayeee, I'm glad to see you post another video! This is great, it motivates me to finish up my War Machine armor! keep up the good work!
@boundlessperception1466 Ай бұрын
You too,'m trying to get on your posting schedule!
@JustGee3D Ай бұрын
@@boundlessperception1466 man I just picked a date and stuck with it!
@AlpacaAsh Ай бұрын
So glad I found this. Thank you so much. I’ve been doing this by hand for too long.
@boundlessperception1466 Ай бұрын
So glad you liked it!
@I_enjoy_blue_crocs Ай бұрын
This is still my favorite cosplay ever
@boundlessperception1466 Ай бұрын
It is phenomenal.
@I_enjoy_blue_crocs Ай бұрын
@@boundlessperception1466 I know ! I wish I was able to make atlist something remotely close but it would have been sued by the materials
@howdymattmon Ай бұрын
That non catalyzed spot putty is so weak, I'd be worried about long term adhesion to a flexible substrate like plastic. Interesting idea though, I wonder how well it would work with regular 2 part bondo.
@mustyolomi2683 Ай бұрын
Noob question: would this also work for small models if I were to scale them up to life size (like a pokemon for example)? Or would the quality not be as defined? Thanks
@ironwolf5837 Ай бұрын
Just ordered from you! Can't wait!
@NoMercyFtw 2 ай бұрын
ive seen it all tape on a Bambu lol
@boundlessperception1466 2 ай бұрын
Do what u have to, too get the best prints lol
@NoMercyFtw 2 ай бұрын
@@boundlessperception1466 I guess so lol
@J_Seven 2 ай бұрын
Great video! Thank you so much for the tips and tricks of Blender like the "L" and "F" key tips. I have been needing to know how to fill in empty objects.
@boundlessperception1466 2 ай бұрын
So glad they helped :)
@hellcat1988 2 ай бұрын
159 days of continuous, non-stop printing... so probably closer to 170 days to account for mistakes, loading new spools, and removing parts.... YIKES!
@Mr_Mistah 2 ай бұрын
4 years late to the party but this goes so hard
@clementegarcia3078 2 ай бұрын
Will you be making the other power ranger weapons as well?
@boundlessperception1466 2 ай бұрын
Most likely yes. I love the original show. Huge part of my childhood.
@clementegarcia3078 2 ай бұрын
I look forward to it!? It’ll be nice to have all 5 to combine into the power blaster!
@minossun 2 ай бұрын
Where is the files?
@J_Seven 2 ай бұрын
Really neat. What are your settings for printing? IE the speed and layer heights?
@boundlessperception1466 2 ай бұрын
For layer height im using 0.20mm and for speed 250mm/s with a travel speed of 500mm/s. Its basically the standard profile for PETG
@J_Seven 2 ай бұрын
@@boundlessperception1466 wow that is more than i expected. I find myself using a 0.1 layer height to get smother results but that takes twice as long. I know we only see the print through a camera but they look finished even without sanding.
@boundlessperception1466 2 ай бұрын
@J_Seven I don't know if I have the patience for 0.1mm
@J_Seven 2 ай бұрын
@@boundlessperception1466 do you have a brand of filament you might recommend for better finishes?
@boundlessperception1466 2 ай бұрын
@@J_Seven nope.i jump between several brands depending on the deals. Geetech sunlu jayo and several others.
@JustGee3D 2 ай бұрын
Looks great homie! You said you used your Bambu, do you own the AMS? Would have been cool just to do a multi-colored print as well.
@boundlessperception1466 2 ай бұрын
Unfortunately I don't own the ams
@gonzaloberduque1002 2 ай бұрын
So the rebellion sword is functional. Have you tested it more by making other types of cuts?
@boundlessperception1466 2 ай бұрын
Unfortunately I haven't
@infiniteshowrooms 2 ай бұрын
Thank you. I’m looking to buy a printer upgrade, focused mostly on props and costumes. I think I’m going to save the money and NOT get a larger printer and save these pitfalls and continue to print in pieces.
@boundlessperception1466 2 ай бұрын
Yea smaller printers are alot more beginner friendly. My cr10s are great and almost never give me problems
@infiniteshowrooms 2 ай бұрын
@@boundlessperception1466 thank you. At this point I’d rather KNOW I have more post-processing/welding to do than MAYBE have a failure 4+ days into a print. 😅
@yourfnafwiki2472 2 ай бұрын
how do you do the joints for them im eventualy going to make my own but none of the listings for the files have any joints (cuz it would be plastic) so is there any or is it just cloth or just a very big jacket or something?
@boundlessperception1466 2 ай бұрын
I only recorded this cosplay
@ThaHipHopDisciple 3 ай бұрын
This is absolute fire
@JustGee3D 3 ай бұрын
dope
@boundlessperception1466 3 ай бұрын
Saw your live it was awesome
@boundlessperception1466 3 ай бұрын
Do u 3d print full time ?
@JustGee3D 3 ай бұрын
@@boundlessperception1466 aye thanks for stopping in, my Lives are doing really well. I have to do them more! I’m kinda retired so to feel in the time I 3D print and stream apex on Twitch 😂
@boundlessperception1466 3 ай бұрын
@@JustGee3D ur retired? But ur so young
@JustGee3D 3 ай бұрын
@@boundlessperception1466 former military/contractor
@BattyNeko 3 ай бұрын
Nice work as usual ❤
@boundlessperception1466 3 ай бұрын
Thank You!!!! Hope You and the baby are doing well!!! :)
@senatorwilsonphillips8724 3 ай бұрын
Ok, but now make a teddy bear that can transform into the yo-yo to replicate Roger.
@boundlessperception1466 3 ай бұрын
Lol I'll see what I can do.
@joeylikeminecraft 3 ай бұрын
my plugs arent going into each other . can anyone help
@deucekiller022 3 ай бұрын
i have a p1s. Will the printer pause if it runs out of filament so i can load another spool or will it just keep going without filament?
@boundlessperception1466 3 ай бұрын
It will pause.
@dosdont 3 ай бұрын
Thanks for the video but I don't know if the program has changed or if the Mac version is different. If you don't have a Mac you don't have a Mac but it would be nice if you could make another video about LuBan with more detail. One thing that confused me right off the bat was when you said you scaled it, I assume you mean you scaled it with another program, like your slicer and exported it rather than within Luban, correct?
@boundlessperception1466 3 ай бұрын
Yes I scald my props and armor in ARMORSMITH before cutting it with luban. Some items luban does not cut in a realistic way so I have to do it manually
@dosdont 3 ай бұрын
@@boundlessperception1466 Manually? well I hope you do a video showing how to do that, thanks
@Me46435 3 ай бұрын
I WONDER IF CHEELAINIS A SHROOM LIKE ALL THE OTHER SHROOMS JULIO AND I BOTH FACED
@fairplayacp 3 ай бұрын
Idk what i am doing wrong...i followed and when i export from blender into bambu and i go to slice it...the area for the dowel rod doesnt go through the entire sword. theres a whole part in the middle that doesnt have the dowel rod hole. what am i doing wrong
@boundlessperception1466 3 ай бұрын
Is the whole u created being filled in?
@fairplayacp 3 ай бұрын
@@boundlessperception1466 just in certain areas. like the whole in the blade is fine and the whole at the bottom of the pommel is good but the handle and hilt there is no hole
@boundlessperception1466 3 ай бұрын
@@fairplayacp there's likely something going on with the whole u created in blender. Maybe u did not apply the boolean
@fairplayacp 3 ай бұрын
Dumb question how do I know it worked?
@boundlessperception1466 3 ай бұрын
Look at the model in blender in x ray mode and remove the physical rod to see if a whole is left.
@Tannius 3 ай бұрын
Were getting closer and closer every day to being able to download a car.
@shurkon56 3 ай бұрын
Holy shit I use meshmixer and it takes forever. I'm definitely downloading this when I get home
@AttemptedMaker 3 ай бұрын
Thanks Man - This is the helpful info I was looking for!
@J_Seven 3 ай бұрын
great job!. That red is a super cool red! did you end up using a clear coat over everything?
@JustGee3D 3 ай бұрын
Super Cool!!! I love this show!!!
@rosestecnologicasociacion7088 3 ай бұрын
pueddes compartir los archivos STL?
@VOX_ERRORhazbin 4 ай бұрын
Waos
@angonangon2120 4 ай бұрын
Looks good
@boundlessperception1466 4 ай бұрын
Thank you
@hansherrera6969 4 ай бұрын
very nice. wanted to buy some but was worried they might be trash but i guess am wrong.thanks ps there tight in ur arms cuz of the guns u got lol
@boundlessperception1466 4 ай бұрын
Hahahha there definitely worth the purchase
@eeveeboss6449 4 ай бұрын
What’s the song?
@mochimochinogreek 4 ай бұрын
Insane
@boundlessperception1466 4 ай бұрын
open.spotify.com/track/5flerg6aEao2VayZezVlgu?si=5843315111ee4262
@rodneycamarena 4 ай бұрын
Can i pay you to make me one