Neoteric Designs

Пікірлер

@BigBabyGaming100 Ай бұрын

I broke my oem charging Handel trying to get the pins in wait another 8 weeks for a new one to come unfortunately

@cxerphax1 Ай бұрын

Should they rattle at all? I had a gun smith install them and mine somewhat rattle if I tug on them or shake the rifle.

@shahens1 Ай бұрын

There should be no rattle whatsoever. Was it installed correctly?

@cxerphax1 Ай бұрын

@@shahens1 I believe so. I will send you a video to you email.

@cxerphax1 Ай бұрын

@@shahens1 sent

@antonskippy5376 2 ай бұрын

Excellent product. I've had one on my Bren 2 for about four-thousand rounds and it's been rock-solid. As for this video, while it's well-shot, incontrovertibly-instructive, and much-appreciated, the bench techniques on display are ... rough.

@TheAcenightcreeper 3 ай бұрын

What is it made of

@shahens1 3 ай бұрын

Current V2 is anodized 7075 aluminum

@metallkopf988 3 ай бұрын

Would definitely be helpful if not everything interesting were to happen on the top edge of the camera view or beyond it... (ca. 2:05-3:00) The clearly visible magazine well isn't really relevant, is it?

@shahens1 3 ай бұрын

Sorry I'm not a videographer and it's less than ideal, but the pertinent parts and information is still there.

@88kar88 3 ай бұрын

Hello, is that latch for the waffle mag available on your site? I definitely love that solution.

@shahens1 3 ай бұрын

@88kar88, please email us at [email protected]

@deaglemeagle 3 ай бұрын

Slick

@nickbugbee21 4 ай бұрын

I finally finished my install. I snapped the plastic fire mode selector pin and Cz parts was down for a while so I couldn’t get a replacement. Great install video and great product.

@shahens1 4 ай бұрын

I'm glad you like it Nick. Thank you for your support as always.

@nickbugbee21 4 ай бұрын

Top notch products and top notch install videos. I wish more companies did what you do. Keep it up

@shahens1 4 ай бұрын

Thank you for your support Nick.

@thehun06 4 ай бұрын

Make one for the MPX/MCX family ...

@danielhess39 4 ай бұрын

Great design 🤩🤙🏽👍🏼

@RollerDelayed 4 ай бұрын

I would personally suggest pin punches with nubs for roll pins, it makes the install much easier than what you showed.😅

@shahens1 4 ай бұрын

Those are not as common nor readily available, but I can see the advantage.

@RollerDelayed 4 ай бұрын

@@shahens1 Understandable, I'm liking the FCH a lot so far. I'm not being poked in the sternum anymore either!

@shahens1 4 ай бұрын

@@RollerDelayed I'm glad you're happy with it. Thank you for your support.

@josephgregory6796 5 ай бұрын

Where can I buy this stock?

@shahens1 5 ай бұрын

@josephgregory6796 its on backorder and I will hold your order when available. Neotericdesigns.net/shop

@r.sanchez9808 5 ай бұрын

I'm interested in a couple braces, one or my wife and one or me on our Scorpion 3+ micros if the price point is good... Let me know if you need beta testers :)

@n0tthemessiah 5 ай бұрын

How does this stock differentiate itself from other telescopic stocks for the Scorpion that are already on the market?

@shahens1 5 ай бұрын

I don't know what the others ones offer but this is offers tool-less installation and 1 hand grab and pull operation. It also has interchangeable butt stock, stabilizer and buffer tube adapter options.

@702flyguy 4 ай бұрын

How bout for the stribog?

@shahens1 4 ай бұрын

@@702flyguy I wish I had one for R&D

@kirklowe5608 3 ай бұрын

3D printed components and a little more girth/width due to this are what stands out to me.

@jeffreyguerttman5055 6 ай бұрын

Just installed mine on my APC9 pro and wow. What a big difference. Awesome upgrade. Thank you for this vid.

@shahens1 6 ай бұрын

Thank you for your positive feedback. Where did you get yours? and Please spread the word around :)

@Sevenarrowz 7 ай бұрын

Just received mine today! It seems good, noticed a bit of wiggle with the supplied pins, with the charging handle folded the charging handle wiggles/has play. Can we not use the OEM roll pins? They should help tighten it all up.

@shahens1 7 ай бұрын

@Sevenarrowz The wiggle is inherent in the factory carrier, but typically unnoticeable since there is no rotational force applied. When this handle is installed, the leverage produced due to handle length is more than 10x the factory handle, hense the wiggle is amplified. The supplied pins are slotted and "spring" tight and eliminate any movement. Factory roll pins are too long and won't work.

@Sevenarrowz 7 ай бұрын

@@shahens1 thank you for your quick response. Neoteric designs customer service at its finest. I am happy to test it at the range! Happy new years!

@shahens1 7 ай бұрын

@@Sevenarrowz Thank you for your support. Happy New year!

@peteroverheater2645 7 ай бұрын

Just installed it within 5 minutes, worked flawless!

@Apoc_Bone_Daddy 7 ай бұрын

Would it work for the bren 2S? Mines a legal sbr with the 16 inch Barrel

@shahens1 7 ай бұрын

@Apoc_Bone_Daddy, yes it wil

@PolenarTactical 8 ай бұрын

Damn it! I like the original stock but this one just looks way better...

@PolenarTactical 8 ай бұрын

Seems like a great product Just a heads up, the link in the video description doesnt work properly

@shahens1 7 ай бұрын

@@PolenarTactical Just added the 👍

@PolenarTactical 7 ай бұрын

@@shahens1 it works 🙂

@codysmith5938 8 ай бұрын

can this be installed for lefties on the opposite side?

@shahens1 8 ай бұрын

Yes, just like you flip the factory one.

@jakeb.7997 8 ай бұрын

So I’m curious…..what are the benefits of having a side folding charging handle instead of just a normal side mounted charging handle. To me it looks….finicky…..like you would rather have a solid lump of metal instead of something that could potentially break.

@shahens1 8 ай бұрын

It doesn't stick out and get snagged on clothing when folded and clears all large optic mounts so you don't bust your knuckles when charging. See Garand Thumb's review here kzfaq.info/get/bejne/rK6erMqf3KzUY2w.htmlsi=kLrR-5y8OPHQW44N&t=738

@jakeb.7997 8 ай бұрын

@@shahens1hello again….another thing I’m worried about is the handle breaking…..or rather the spring that makes the handle fold out

@shahens1 8 ай бұрын

@@jakeb.7997 please email us with all comments and concerns at [email protected]

@Budoka72984 9 ай бұрын

Working working working

@boygonewhoopdataZZ 9 ай бұрын

lol are you related to the SOTMFG dude?

@davidderushia3552 10 ай бұрын

Will this work with the 805?

@shahens1 9 ай бұрын

Unfortunately not

@mr_mel 10 ай бұрын

Does this work with the factory waffle stock? Or does it have to be the newer stock design they came out with?

@shahens1 10 ай бұрын

Only works for the factory BR stock

@edmundbasson8497 10 ай бұрын

Is this stock 805 Gen 1 A2 compatible?

@shahens1 10 ай бұрын

It's not unfortunately

@Free_entertainment401 10 ай бұрын

I have an 8 inch 2ms. Do you know where I can get a replacement barrel to make it 16 inch? Or they don’t make parts for it anymore??

@shahens1 10 ай бұрын

@Free_entertainment401 try Mos Tek

@benjamin7576 11 ай бұрын

Spring should be removed. Automatically closing is bad.

@shahens1 11 ай бұрын

@benjamin7576 please explain why

@nailshoclam2677 11 ай бұрын

Are you planning to have 1913 rail attachment? For other gun user. Thank you.

@shahens1 11 ай бұрын

@nailshoclam2677 The 1913 adapter is not the issue , but the rails clearing the ejection port and bolt release on different platforms is the big challenge not to forget the different widths of upper receivers where the rails may be too far apart or not enough to slip over the receiver itself.

@guysavard5090 11 ай бұрын

Great install video, very thorough. Another Bren 2 addition I never knew I needed…until now.

@hellomyride7793 11 ай бұрын

Where are you obtaining aftermarket parts brother ?? I’m looking for a better rail system ??

@shahens1 11 ай бұрын

Preston precision is a good source for rails

@lennysinnet8567 11 ай бұрын

Be nice if it was complete so it just pushed in to install

@garfieldmartinez87 11 ай бұрын

Any chance you guys are working on a aluminum lower like Haga defense?

@shahens1 11 ай бұрын

No plans for a lower.

@garfieldmartinez87 11 ай бұрын

So I just found you guys! Great stuff! Just getting into the Bren 2 community myself and looking to dress my lady up in some of your stuff.

@InkwellFoto 11 ай бұрын

Mine does not spring back as aggressive as yours. Any recommendations?

@shahens1 11 ай бұрын

Please contact me at [email protected]

@greenwil Жыл бұрын

Travis over at 2A installed this on his APC9Pro and it looks like it will function fine. Considering picking up a pair of these to go on mine soon.

@shahens1 Жыл бұрын

Yes he did. I was waiting for his confirmation.

@greenwil Жыл бұрын

@@shahens1 Bought the Billet lower with Elftmann for the APC9 from Travis a while back, great guy to deal with!

@Sevenarrowz Жыл бұрын

I hope you’re enjoying your time in the wilderness! Tbh cant wait for order to ship out so I can install it on my rifle😂

@shahens1 Жыл бұрын

I appreciate your patience and understanding. I'm shipping a whole lot of packages Monday

@Sevenarrowz Жыл бұрын

@@shahens1 Im up in Canada and got a local gun store to purchase for me so I cant wait! I want to do a review of how it feels! It would be amazing for not snagging on vests an gear.

@shahens1 Жыл бұрын

@@Sevenarrowz which store? Or online vendor?

@Sevenarrowz Жыл бұрын

@@shahens1 red deer shooting center

@shahens1 Жыл бұрын

@@Sevenarrowz Ahh yes, a US based vendor contacted me for them. They should add my products to their website like they have all the HBI products. I primary deal with Aztech Armory who handles the whole process instead of going through 2 middlemen.