Ink is amazing in airbrushes. I have probably 36 varying bottles..not all created equal. Reduces amazingly with denatured alcohol also.
@rockfoxdesignsАй бұрын
Agreed, just need to reduce the air pressure properly.
@Wordupdoe3 ай бұрын
Looks great brother!
@rockfoxdesigns3 ай бұрын
Thanks 👍
@ericpierce45103 ай бұрын
Would have been a lot easier to start with a wooden down. It’s already round. Cut to length, round sharp edges (chamfer edges), then cut your slot for hook, glue in place, make mold....
@rockfoxdesigns3 ай бұрын
Agreed, but didn't have the correct size dowl at that time.
@joebaggs785 ай бұрын
Where do you get the spinner body shaped like that?
@user-ex2pw8vk2x6 ай бұрын
Watching to learn
@johnthomas58066 ай бұрын
me, me, me
@tezzaskayakfishing6 ай бұрын
Your fingers scared me so close to that band saw blade 😮😮
@rockfoxdesigns6 ай бұрын
Hah! Me too that's why I found a better way to do this. I just cut a dowel rod now.
@tezzaskayakfishing6 ай бұрын
@@rockfoxdesigns it was a good job you did. I was going to comment maybe a thin dowel would have been easier.
@marceloamador920247 ай бұрын
656
@ShooterQ7 ай бұрын
Excellent crafting and video work.
@rockfoxdesigns7 ай бұрын
Thank you!
@tokay9998 ай бұрын
Great job
@rockfoxdesigns8 ай бұрын
Thanks!
@bjm61049 ай бұрын
That looks so serene
@damnitman19699 ай бұрын
Many thumbs up thanks for sharing
@EASTSIDERIDER7079 ай бұрын
Sounds like a storm outside.
@johnthomas58069 ай бұрын
26 min. to watch a 10 min. show, a bit to much...but the content was well presented,,
@rockfoxdesigns9 ай бұрын
Yeah, older video. Had to start somewhere though.
@ModestReviews10 ай бұрын
Quick and easy!
@pontoontri-hull15611 ай бұрын
I'm currently building a 4-piece swimbait and installed this style joint last night for my first time. Coincidentally, your video appeared on my KZfaq feed this morning, so I watched it again. 👍
@philadiarte759511 ай бұрын
Hello What thickness is the lexan 1/8” or 1/4” ? Thank you
@rockfoxdesigns11 ай бұрын
It should be 1/8 to 3/16 inch.
@hookreelfishing11 ай бұрын
First time to see your channel, you do great work... subbed. I make soft plastics but would love to get into hard baits. I watch for both reasons.
@rockfoxdesigns11 ай бұрын
Awesome, thanks for the sub! Let me know if you want me to build something specific or explain something.
@hookreelfishing11 ай бұрын
@rockfoxdesigns Will do ,thanks!! Going to ride through your older videos later tonight.
@pontoontri-hull156 Жыл бұрын
One of my hobbies is building wooden lures. Just found your channel, so I'll have to go back and watch more of your stuff.
@urizalzman Жыл бұрын
Amazing Job, thank you.
@rockfoxdesigns Жыл бұрын
Thanks!
@billbrantley7290 Жыл бұрын
I watch them for instruction. Keep doing what you do.
@christopherromina5445 Жыл бұрын
Cool lure, cool paint job
@rockfoxdesigns Жыл бұрын
Thanks!
@ollejoersved8552 Жыл бұрын
Cool that you used bondo. Never thought of bondo as a mould material.
@ashleychandler4024 Жыл бұрын
And not one finger was lost in the making of this film !!!! :)
@rockfoxdesigns Жыл бұрын
Yeah, I've come up with a way better way of making those now, lol!
@jesselynn4539 Жыл бұрын
Would love to see you make it heddon prowler lure
@rockfoxdesigns Жыл бұрын
I had to look that one up, that would be a fun one to make! I did find that someone has a video on making it if you don't want to wait for me to make one but I'll add it to my soon to make lures. Here's the link to his video: kzfaq.info/get/bejne/osuerc9omaiqdn0.html
@jesselynn4539 Жыл бұрын
For instruction
@daviddevries2698 Жыл бұрын
What burner is that?
@rockfoxdesigns Жыл бұрын
It's the Colwood detailed wood burner deluxe package. I would recommend it if you're looking to get one. Works great!
@camorrisiii Жыл бұрын
This is so cool 😎 nice yak, I’m going to share this. Thanks for posting 👍
@rockfoxdesigns Жыл бұрын
Awesome, thank you!
@camorrisiii Жыл бұрын
First
@victorpapaiz7364 Жыл бұрын
Great video. I noticed in an early video on your channel that you used Bondo for your lead mold. Do you prefer plaster of pairs over it now? What difference have you noticed working with the two options?
@rockfoxdesigns Жыл бұрын
Plaster of Paris is much easier to work with but doesn't last very long. Bondo is a pain to get it molded before it hardens too much but once you get a mold done, it'll outlast the plaster usually. I also get a bit cleaner mold out of the plaster since I can vacuum pump the air out of it. This was originally going to be a bondo mold, but the bondo was giving me fits so it became a plaster mold.
@mike1261 Жыл бұрын
I still haven't mustered up the nerve to make a Whopper Plopper. I too concerned about getting the through-wire straight through the center of the lure and the joint cut perfectly square. Maybe some day I'll have courage. Nice job!
@rockfoxdesigns Жыл бұрын
This was my second plopper, my first one didn't work so well because I crossed it with a walking dog bait... yeah those don't combine well. Always wanted to swim sideways but never return to center.
@mike1261 Жыл бұрын
@@rockfoxdesigns It seems of all the baits out there, this one is more complex because of the spinning tail. I can balance a multi-piece swimbait, but the Plopper has me hesitant. I know if it doesn't work, just start over and make another 'til it does, so I don't know why I haven't done one yet.
@KevinFarr-uh9ni Жыл бұрын
Quite a talent!
@stoutfire715 Жыл бұрын
You mean the india ink is more like ink then a paint..
@rockfoxdesigns Жыл бұрын
Who would of thought right? 🤷♂️ but seriously, reduce that pressure.
@childrenoflight3010 Жыл бұрын
The original Mathew called Gospel of the Hebrews did not have the virgin birth story or 3 wise men and neither did the original Luke. As far as Joseph is concerned he doesn't even speak a word in the gospels supposedly died while Jesus was young so who interviewed him ? No One !. The gospels of Mark, John, James, Peter and letters of Paul mention nothing of the virgin birth. The original Mathew from the 1st century was called the gospel of the Hebrews and as attested by ancient Roman historians it did not have the 3 wise men or any virgin birth story. These Roman historians and scribes also state that the original Luke which was supposedly discovered with the other letters of Paul by a Roman businessman and cult leader named Marcion did not have the virgin birth narrative so who interviewed Joseph and Mary ? if Mary and Joseph would have been interviewed in the 1st century ad with these stories of Holy Father being Mary's husband they both would have been killed by the Jews. It is now evidently clear that these stories at the beginning of Mathew and Luke were added in the 2nd century ad to bring the Messiah Jesus into line with the Empirical Paganism which prevailed at the time which was Babylonian worship of a Queen of Heaven and that the Gods had sex with earthly female virgins. Joseph was killed off quickly in the gospels but used to commence to enforce the false and evil Mary and Joseph narrative to ensure that Roman Babylonian Paganism and Satan worship would never end. Between the 2nd and 4th centuries ad Rome massacred the Nazorenes and Ebionites who held to the scriptures of their original Gospel of the Hebrews ( Mathew ) and destroyed all their books. As stated in these original gospels by ancient Roman historians who recorded some information and quotes as well as most of our current truthful gospels, Mark James Peter, Revelation letters of Paul Jesus was born a normal man and Joseph was indeed his biological father and declared the Son of God at His Baptism. The false Isaiah prophecy added in our corrupted gospels of the virgin birth is a mistranslation and complete lie. if people care to read the full chapters of that story in Isaiah they will see that Isaiah was talking about his young Jewish wife who was pregnant with a sign child to King Ahaz around 700 BC and as the original Dead Sea Scrolls now state the wording used was '' a young woman '' not a virgin, so please tell me who interviewed Joseph and Mary ?
@timyoung6431 Жыл бұрын
I like the videos for instruction, entertainment and the artistry. Keep making the videos, great job! I hope you have a fantastic weekend!
@rockfoxdesigns Жыл бұрын
Thanks a bunch! I'm considering doing a detailed look at portions of the bait making processes in separate videos but still making a video for those that just like watching the process as a whole.
@haroldadams6259 Жыл бұрын
Would love to buy a few of the lure body from you
@mikejackson2228 Жыл бұрын
I learned a lot from this video, but I don't know how or why you did it. I heard you talking in fast motion, maybe do a voice over so we can follow your steps?
@rockfoxdesigns Жыл бұрын
Great feedback! This was originally going to be a voice over but had trouble with the mic and decided to get the video out instead 😅. There was so much echo in my headset mic, it was painful to listen to. I'll figure something out for the upcoming videos.
@comfortablynumb9342 Жыл бұрын
Why Bondo?
@rockfoxdesigns Жыл бұрын
Holds up better than plaster and is cheaper and easier to find than casting silicone.
@humblehombre99042 жыл бұрын
You know, if you left the wood on, sealed and painted, they would be nice floating jig heads. You’d have to experiment with different wood densities but you get my drift. Also, if you used a long dowel, cut a slot down the whole length to fit the hook like you did, then before cutting off each head, round and shape it on the full length dowel. Then cut off the one, shape the next and so on. Thank you for the work, and offering it to us. Regards from ON, Canada eh?!
@OhioFishingLures2 жыл бұрын
Nice job I'm impressed with the paint job sir
@rockfoxdesigns2 жыл бұрын
Thanks, painting is fun part... well besides catching fish 😄!
@mcpineapples3232 жыл бұрын
I appreciate you making this video although I would like to give you feedback and request more information I came to see how you made it rotate, I felt like you didn’t show enough of that and would like to have had you list more of some of the products you are using to make it and where I could find the parts for it like what section of a hardware store. Also if someone doesn’t have all of those tools at their disposal I’m a rookie with making lures just started last week… I don’t think I have a way to heat up the metal like you did. What’s the name of the plastic you used for for the propeller? Could I do it out of wood instead?
@graftedbranch44802 жыл бұрын
Great video
@rockfoxdesigns2 жыл бұрын
Thanks!
@TheVikipedija Жыл бұрын
Can you reuse the plaster molds?
@chrisbroome94352 жыл бұрын
Looks like that will work.
@johndoe-zy9oh2 жыл бұрын
Thanks for the vid, good things to keep in mind. What kind of camera do you use for these videos? It’s great quality. Do you rig it up somehow?
@rockfoxdesigns2 жыл бұрын
I believe the underwater shots here was with my Nikon coolpix on a tripod. I've pretty much retired this camera now.
@dana65932 жыл бұрын
PЯӨMӨƧM
@DavDaDdue2 жыл бұрын
I have fallen in love with the chicken rig. However I find the baits rip alot. Amy ideas what I can do to limit this?
@rockfoxdesigns2 жыл бұрын
You could buy lures that are made out of that highly elastic plastic, like z-Man or Niko baits. You could also try tying line between the weight and threading it through to the hook, may make it last longer. I'll experiment with it some and make a video if I can get it to work better.
@MasOdi2 жыл бұрын
Nice tutorial mate
@rockfoxdesigns2 жыл бұрын
Thanks! I'm getting ready to update this video. I have some new tools I'd like to try out.