Thanks for making this video! I learned a lot when attempting this with a 1/4-20 thread. A couple of things I discovered.... For smaller threads you have to create the "triangle" wire of the thread with perfect dimensions or you will get faults. I had to break open the machinist handbook to get exact dimensions. If the "triangle" feature is too big for the helix, the geometry will run into itself and cause a fault. It took me a bit to figure out that's what was happening. The internal flat, in the valley of the thread, is not exactly on the helix start point. Its actually shallower than the true v point of the thread. (the triangle wire is not touching the helix wire) I also didn't really line up the helix start point with any other part features and creating the plan on the helix point still worked fine. Last little thing, you can create the triangle lines on 30' just by setting the degrees when creating the line instead of using the rotation function.
@zipit-mediaАй бұрын
Bambu Studio V 1.9.3.50 ????
@allahboleАй бұрын
That's a wheelbarrow
@CkmfgАй бұрын
Sorry I got the song and the name mixed up
@allahboleАй бұрын
@@Ckmfg better song than this kzfaq.info/get/bejne/gKtpfLN2yrHUZXU.html
@Ez-Ripz1112 ай бұрын
Thank you! Please keep the videos coming
@YoudontNeedtoknow-es2xs2 ай бұрын
Oh man thanks for that absolute wealth of knowledge. Just click the easily labeled buttons and let the 1200 printer do everything? Who could've ever figured that out
@Ckmfg2 ай бұрын
If you need a therapist to talk to let me know. You seem upset at very random things that could be an issue.
@thepodboss12 ай бұрын
Have you tried PETG film yet? Cause that’s what was available before ASA came out and i don’t know I think they have the same properties but with different names. You tell me what you think 🤔.
@Ckmfg2 ай бұрын
Yes I print them both. ASA does seem stronger in my strength tests for my product
@thepodboss12 ай бұрын
@@Ckmfg sweet thank you just needed an second opinion on ASA VS PETG 👍
@jameshaden92022 ай бұрын
thank you! I started to talk shit about the way you sound until you told me not to. LOL
@BlakeHorton-ji2mf3 ай бұрын
Alternative: Import a fastener, put it in place and boolean remove the common area.
@Ckmfg2 ай бұрын
The difference is my way is educational. And some threads are made to a different percent of threat engagement This way you can control exactly what you need. But if it is of no concern and you're not curious how a threat is made then I suggest buleon
@Cmtb1254 ай бұрын
KLAW. Are you done making videos ???? Plz continue sir. We can pay you
@Ckmfg2 ай бұрын
Well what do you have in mind
@Cmtb1255 ай бұрын
Please keep making videos sir. I will pay you personally to help teach me the way of mastercam. My career depends on it! Plz reach out if you are willing to personally train someone! Thank you Klaw!
@dilansampathdandeniya36877 ай бұрын
Hey, It's so simple so easy to understand. Thank you very much.
@yasnac75767 ай бұрын
Great time learning this. Created a file with the geometry that works . Merged it with my part file with out the threaded holes . Applied the Sweep geometry to each hole (8 holes translated to )and swept the helix. It created a positive of the sweep ( didn't cut the main model) and went to Boolean and removed the thread to cut the main body! Sweet! Been using Mastercam off and on since '92 when it was a 2.5 D system. was a Catia user too but retired now building a telescope mount .
@metinevrensel9 ай бұрын
can you explain area rest mill stock parameter?
@sampsonmetalconcepts10 ай бұрын
Thx for breaking this down! I was storing everything in a separate master file and importing the model into that. This way is much better. As a job shop an added bonus for me is standardized tools in the machine for common uses 🤙🏼
@efraincaballero7482 Жыл бұрын
As the owner of a very old machine, I appreciate this a lot, sending code at 9600 baud rate takes a long time!
@lifeisgood7954 Жыл бұрын
Mr...i post my subtitution Aaxis...for making screw contour path....why my A axis not move? Please help mr..thank's for helping .
@Cmtb125 Жыл бұрын
No video in one year. COME BACK klaw!
@giessjh6 Жыл бұрын
My virgin ears!
@travisnorseman8648 Жыл бұрын
Cool that you are in Minnesota!!
@gillisdebilio7086 Жыл бұрын
Will try that trick fore shure!
@themonkeyproject Жыл бұрын
Mastercamiacs....I don't like that at all. Good videos though.
@erferrera8505 Жыл бұрын
ENTRY POINT FOR TOOLPATH " FLOWLINE " ??? THANKS
@erferrera8505 Жыл бұрын
hello, is there any way to use an entry point in toolpath "RAMP" ?
@Eluderatnight Жыл бұрын
Very nice demo. Can't believe they don't have a built in tool.
@SejoRelentless Жыл бұрын
Wow I love this , Thanks a lot man I’m super happy I stumbled on your channel and would definitely subscribe to your patreon, please let me know how to look you up
@hradford55 Жыл бұрын
If you also check "Tighten Line filtering tolerance" & move the slider to 75%, it will shorten your code even more.
@thermonucleardevice2 жыл бұрын
Something I ran into, I was trying to make OD threads and it wasn't allowing me to select "cut body", and was generating a solid body instead of a cut. I had to select a target body (pointer right below list of Types) after doing the Sweep operation, then click the solid I wanted to cut.
@frankn8151 Жыл бұрын
Same thing just happened to me. My solid was showing as so but wasn’t actually a solid body(I screwed up somewhere). Had to revolve my wireframe again into a solid.
@Nick2014B2 жыл бұрын
Right to the point good stuff
@LiOSdn91242 жыл бұрын
I work in the mold manufacturing industry I don't know the difference between Hybrid and Equal Scallop toolpaths When do I use Hybrid ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, When do I use Equal Scallop ,,,,,,,,,,,,,,,,,,,,,,,,, please answer me
@Ckmfg2 жыл бұрын
Hybrid does a vertical cut first with arc codes then finishes the floor with scallop. Equal scallop is for floors and shallow surfaces only. it will plunge into a wall no matter the depth so cut walls first.
@LiOSdn91242 жыл бұрын
@@Ckmfg Well, i do the machining of injection molds(core ,cavity) After completing the roughening strategies Does this mean that it should start Hybrid first
@Ckmfg2 жыл бұрын
@@LiOSdn9124 I am a general Manager at a high percision mold shop
@Ckmfg2 жыл бұрын
@@LiOSdn9124 no start with waterline or 3d contour
@randykathman95962 жыл бұрын
best mc videos, thanks
@sea98000wa2 жыл бұрын
Nice and easy to follow instructions👍👍👍
@bunch78782 жыл бұрын
awesome, subscribed
@Slacker3336662 жыл бұрын
Man thank you for this I knew fusion 360 you could do this but never found a way in mastercam. I appreciate you for this
@Nick-tu3xb2 жыл бұрын
Love the videos brother, kinda took over at my work and i got about 6 months in on CNC, videos help me a lot! 👍🏻
@shaneprice21022 жыл бұрын
Could you create a video for these situations please. Would like to learn more. Cheers.
@raider16282 жыл бұрын
Like the video!!! Could you do a video on a complex part showing the differences?
@tomasobamela2 жыл бұрын
I thought you were going to use your microphones!
@Ckmfg2 жыл бұрын
lol I did
@tomasobamela2 жыл бұрын
That microphone video was funny.
@Ckmfg2 жыл бұрын
@@tomasobamela I thought so as well
@justinnorth15262 жыл бұрын
Well said! It's important to remember that the latest is not always the greatest for all situations.
@Ckmfg2 жыл бұрын
Old school wins most times. lol
@lamisbelhachemi25842 жыл бұрын
Thank a lot good job
@JohnHebber262 жыл бұрын
En mi hoja de reporte , la línea solo se muestran las trayectorias como tal , sin el Sólido l la pieza . Como hago para que aparezca ?
@Ckmfg2 жыл бұрын
The view of you screen is what it captures. 1.orientate your set up sheet on your screen. 2.while model is turned on visible to your eye the way you want it to be presented to the machine then create set up sheets. it should import every visible geometry to the set up sheet.
@easyspeedsandfeeds14102 жыл бұрын
That’s dope🔥
@Duceytwoducey2 жыл бұрын
This is experience talkin. 🤙
@Duceytwoducey2 жыл бұрын
😂👏
@JuLew31052 жыл бұрын
What of you just need an A90 rotation, could you do the same thing and keep it as the same (G workoffset)?
@Ckmfg2 жыл бұрын
Create the new plane and leave the top as the first plane
@Glowandshine..02 жыл бұрын
Well depends how talent you are sometimes I imports too but I like make one for each I make pgms for 10 cnc mills 6 cnc lathes I’m probably good so far
@Ckmfg2 жыл бұрын
Well quantity of machines means nothing. It's quantity of new parts.
@allensalazar3102 жыл бұрын
Hi sir im fan of you..im watching everyday your mastercam tutorial....how to operate 5100 duravertical dmg mori cnc milling..cause i try to work offset and z axis and tool offset using manualy paper method and then ill run the program and has been error Z axis is over travel but the program good nothings erorr..but my machine is have probe and reinshaw how to disable also the reinshaw and probe thank u so much
@Ckmfg2 жыл бұрын
In mastercam do a force tool change on every toolpath. Compare the code at the end before each tool change maybe the g28z0 is it right for that machine
@buğlemderya2 жыл бұрын
stok oluştururken otomatik merkezlere nokta olusturmalısınız. (face center points)
@buğlemderya2 жыл бұрын
çok teşekkür ediyorum çok güzel bir bilgiydi benim için.