8 ай бұрын
8 ай бұрын
Пікірлер
@kevbateup9567 2 күн бұрын
Great idea ford mazda having the dip stick under the vehicle near the exhaust.Henry Ford must be proud.
@TheBrowneTown Күн бұрын
Agreed. Their argument would be that they consider this a non-serviceable item but that's ridiculous for a red that gets worked hard off-road or when towing.
@kevbateup9567 2 күн бұрын
Just don't buy stupid mall crawlers
@GaborKarl 5 күн бұрын
any ideas on how to remove an sd card reader? Mine keeps failing to rear the card.
@TheBrowneTown 5 күн бұрын
Sorry mate but an SD card reader in what?
@XxRays1xX 7 күн бұрын
Fantastic video helped me rite out thanks mate keep up the good work 🤙
@TheBrowneTown 7 күн бұрын
Cheers, glad to help.
@joshstrong4756 8 күн бұрын
The metal shavings are normal? I noticed the same on my magnetic bolt and got worried.
@TheBrowneTown 8 күн бұрын
Small amounts are apparently normal but if you see large chunks that are easy to grab in your fingers that might be more concerning.
@JV-wl6ex 9 күн бұрын
Great walk through!! Not many videos out there where each explanation made sense without abandoning your audience. I “beared” through the whole video and it really helped. Thanks!
@TheBrowneTown 9 күн бұрын
Cheers, hope it helped.
@motobandits5338 12 күн бұрын
Another great Video mate, What insulation did you use in the canopy and has it made a difference?
@TheBrowneTown 12 күн бұрын
It's a sticky back 10mm thick one from Clark Rubber. Not sure if it made a difference because I did it straight away when I bought the canopy. So I have nothing to compare it to 🤷♂️
@RangerDanger720 12 күн бұрын
Awesome content man, hey question❓ with the new exhaust, did you change anything with in the ECU? For example turning off the regeneration phase for the DPF? If so how did you do it? Can't find anything on KZfaq or google that shows how to remap the ECU etc
@TheBrowneTown 12 күн бұрын
Nah my car is 2015 so there's no DPF on this. It goes from the turbo back. I did get an engine tune done later down the track as well.
@suprafan246 14 күн бұрын
For the second actuator! I drilled a small hole in that upright bar so the screw driver can fit. I mean you won’t see the hole with the trims an are back on.
@TheBrowneTown 14 күн бұрын
Yeo as long as you do minimal holes it will all be fine.
@nigejuan71 18 күн бұрын
Bro, I'm so not mechanically minded but your video was so detailed, well explained & well thought out I think even I would have confidence in doing it myself as long as I prepare my tools, accessories & parts as well as you did. Plus watch & rewatch your tutorial. I see preparation is key. Fantastic video, great job
@TheBrowneTown 18 күн бұрын
First time is always the hardest, after that it's a breeze! 💪
@aussielivin8876 22 күн бұрын
I was sitting across from you guys in my white bt50 with my ktm watching yous get unstuck hahaha
@TheBrowneTown 22 күн бұрын
Hey mate, where was this? I didn't get stuck anywhere on this trip thankfully!
@0405jules 22 күн бұрын
Awesome editing and filming style compared to the bigger channels! Subscribed
@TheBrowneTown 22 күн бұрын
Thanks mate 👍
@martindormer2116 22 күн бұрын
Love the clip mate. Got a 79 and been many parts of WA and well off the beaten track. The jaunt north of Perth is a real fun one.
@TheBrowneTown 20 күн бұрын
Cheers mate 👍
@clintonhall2773 22 күн бұрын
When you head north in wilbinga there is a sign about 200m before the river mouth saying vehicles are prohibited
@TheBrowneTown 22 күн бұрын
Cheers, good to know. I've always cut back into the main road.
@anthonyjun3508 23 күн бұрын
Awesome video man! This reminds me of Robe to Beachport in SA. What is the App you use for off-line maps? Cheers!
@TheBrowneTown 23 күн бұрын
I use ExplorOz, but often I'll also download things on google maps to work offline and I do carry a paperback nap in case they fail. I've seen that robe to beach port on KZfaq and would love to do it one day when I get around to doing the lap.
@MrCravenhaven 25 күн бұрын
I wish you had done this video a few years back. I installed a TJM steel long range tank when I bought the Ranger in 2019, and on a recent trip had to do an emergency 5 day trip from the middle of the Canning Stock Route to Newman to get the tank removed, crack rewelded, and reinstalled. Comments about my troubles elicited several replies stating poly tanks were better. I went steel in the first place because I thought they'd be stronger.
@TheBrowneTown 24 күн бұрын
Where were your comments? On a forum? I haven't looked very hard but haven't seen any comments about the poly tank failing but I've seen a fair few about the steel tanks. Plus the benefit of halving the weight. Just a shame there aren't any drain plug so hopefully I never need to drain the diesel.
@MrCravenhaven 23 күн бұрын
@@TheBrowneTown I commented on the one of the Canning Facebook forums, not here.
@ThoseFunnyAnimals23 25 күн бұрын
Good day. On a 1997 Pajero 3.5 Automatic with the torque converter seal MD707575 NBR nitrile rubber, how does one change that?
@TheBrowneTown 10 күн бұрын
Sorry to say man but I've got no idea. Not a mechanic, I'm just a guy that has a crack at some stuff.
@sootyranger 27 күн бұрын
As always, the attention to detail and depth with your reasoning and explanations for everything to do with this build is top notch, Love it.
@TheBrowneTown 27 күн бұрын
Thanks mate.
@Normacfan 28 күн бұрын
Just found your channel. Fantastic information and well put together video's, congrats.
@TheBrowneTown 28 күн бұрын
Thanks mate, hope you like the rest of them.
@DarrenBaldock-it9rf Ай бұрын
Hi mate great video really help everything is working so far waiting on the loom for the steering wheel control as my CAN bus didn't work either. i have the reverse signal switch working but not getting the camera image onto the screen. Not sure what cables to connect. Any help would be amazing
@TheBrowneTown Ай бұрын
Hey mate, if yours is the same as mine you'll need to tap into the camera feed in the rear view mirror and take it down with a cable. I have another video about moving your camera feed from the rear view mirror that has all the details for it. You can move it completely from the rear view mirror or wire it so it appears in the rear view mirror and the head unit.
@DarrenBaldock-it9rf Ай бұрын
@@TheBrowneTown Thanks mate, I have 2018 BT50 had a factory Alpine head unit the reverse camera displayed onto the head unit. just don't know how to located the feed.
@TheBrowneTown Ай бұрын
Ahh ok, I would have thought the factory one would have an existing RCA plug that needs to be plugged into the T'eyes reverse cam RCA plug (I think it was yellow) that's on the back of the unit. Mine was labelled, all the connectors in the wiring loom. The wiring loom has a small white clip with pins that connects to the back of the unit.
@DarrenBaldock-it9rf Ай бұрын
@@TheBrowneTown That would be nice, but i think its hard wired there in no RCA port on the back of the old unit. If i cant locate the feed I'm not sure what to do other than feed and install a new camera.
@adamdixon2251 Ай бұрын
I assume the globes aren't replaceable!
@brendandarroch798 Ай бұрын
Need a update on how you ended up installing that headunit. I have an Xtr as well and options are limited
@TheBrowneTown 6 күн бұрын
Hey mate I've got a video about the T'eyes unit install.
@nasurinhakimu Ай бұрын
Nice review. 👍 May I know if you can play the music while the screen is off?
@TheBrowneTown Ай бұрын
There is a button for "screen-off" that just makes it all go black and everything keeps playing.
@andrewhobbs8333 Ай бұрын
The sensor switch clip spinning it out mean thanks
@lionelvan123 Ай бұрын
ledgend, thank on the torque specs!
@TheBrowneTown Ай бұрын
No dramas, good luck
@RovicDarnellAlejandro-d1d Ай бұрын
Same method at the rear or nah?
@TheBrowneTown Ай бұрын
Rear has brake drums. I haven't changed them.
@chrisp7179 Ай бұрын
Awesome video mate. Iv got a 2013 xtr and been wanting to upgrade my unit for years but there has been so many crap upgrades. I’m keen to get the same unit. Is it bright at night or does it dim down automatically when you turn your lights on?
@TheBrowneTown Ай бұрын
I don't think it does dim actually but I have all my apps in dark mode so the screen is mostly black for me (Spotify or maps) so I never really notice.
@chrisp7179 Ай бұрын
@@TheBrowneTown and your still happy with it and how it operates ?
@TheBrowneTown Ай бұрын
@chrisp7179 yeah I am but it's not perfect. I just wanted Android to run apps without car play or android auto and I wanted storage. I have a few shortcuts set up which makes it way better. I just wish my centre button steering wheel control worked but it doesn't and the phone charging is shit when it's hot it doesn't charge. Still wouldn't change it though.
@chrisp7179 Ай бұрын
@@TheBrowneTown yeh ok that’s fair enough. It seems no matter what one you look at there is always features that aren’t so good and some that are. No one seems to make the perfect unit. And getting something that is plug and play with no hassles.
@TheBrowneTown Ай бұрын
@chrisp7179 yeah no perfect units yet. But this one is better than a lot of the ones which cost more.
@garysheppard4028 Ай бұрын
Great video! I'd rank the dash cam high as it's for one of those low probability/high consequence events. I have the RedTiger 11" rear mirror dash cam. Got it off Amazon for $199 and it has 4K front and 2.5K rear cameras. I had the previous version (1440/1080) and that's migrated to my wife's car now that the new one is in the Triton. The rear camera is mounted to the top of the back wall of the canopy. So that gives me rear vision + dash cam recording front and rear. I feel naked driving without a dash cam now. So it's an essential. For me ;-)
@TheBrowneTown Ай бұрын
I like the reverse one for every day driving, but I do need to upgrade it soon as I can see it failing permanently one day. I don't regret the forward facing dash, it's just uninteresting and something has to be last 😛
@garysheppard4028 Ай бұрын
@@TheBrowneTown My wife had one of those Viofo forward mounted dash cams. Unfortunately the only time we needed it was recently and it had become disconnected. The screen is small and goes blank shortly after startup so she didn't know it wasn't working and we didn't get the evidence we need. D'oh! I like the mirror-type dash cams as you can see immediately if they are working or not. -Just my two cents. My lowest rank item would be an Ultragauge Bluetooth OBD. What a supreme piece of crap. Eh, you live and learn...
@TheBrowneTown Ай бұрын
@garysheppard4028 what happened with the Bluetooth OBD ?
@garysheppard4028 Ай бұрын
@@TheBrowneTown Although the bluetooth connects, the software of the device recognises hardly any systems within the Triton. It's pretty useless. I think it would be fine for an American truck but for something outside that market it is hopeless.
@TheBrowneTown Ай бұрын
Cheers, haven't tried Bluetooth OBDs.
@Tom-ro2vt Ай бұрын
Good video mate, i know what you mean about the info on catch cans it’s so confusing! Some say definitely do it others say dont 😑. Thanks
@TheBrowneTown Ай бұрын
Yeah it's hard to find out the truth, I'll run with it and see how it goes.
@NaughtyGoatFarm Ай бұрын
Farking stupid design.
@TheBrowneTown Ай бұрын
Be nice if it had a sump plug.
@NaughtyGoatFarm Ай бұрын
@@TheBrowneTown and a proper dipstick and place to fill accessible under the bonnet.
@TheBrowneTown Ай бұрын
Yes even better. I could be wrong but I believe there might be aftermarket pans with sumps. If I had a sump I'd still not be changing it too often, maybe every 100k
@patricioortega9250 Ай бұрын
The dealership told me $600 for all the work since they have to remove the entire dash.
@patricioortega9250 Ай бұрын
The dealership told me $600 for all the work since they have to remove the entire dash.
@TheBrowneTown Ай бұрын
It is true that to do it without having to drill a hole then you would have to remove the dash. You can do it this way to save money, maybe even ask the dealership to do it this way if you really wanted? Most people don't have the time or patience for removing the dash for an issue which is likely to pop up again and again because the part itself seems dodgy.
@0197jones Ай бұрын
Cracking video mate
@TheBrowneTown Ай бұрын
Thank you 👍
@wind7027 Ай бұрын
all these android unit should think of how to make the major controller display icons located below, the horizontal of the unit, not on the left of the unit
@TheBrowneTown Ай бұрын
Like a volume controller?
@Agent-xj5xe Ай бұрын
how do you connect the hardwire to the power of car - you did not show
@TheBrowneTown Ай бұрын
I ran cables through the firewall in the front left hand side of the car, behind the glove box (for right hand side drive cars) and into the engine bay. I actually did this in a different video as part of the car build so I already had cables ready to go technically. I have a blue sea safetyhub 150 in the engine bay that I use for all accessories, so all I needed was a ring lug to connect my a five and negative wires to this fuse hub, otherwise you connect direct to the battery.
@NaughtyGoatFarm Ай бұрын
Damn the links to parts are broken. Anyone have new links?
@TheBrowneTown Ай бұрын
I can update them later when I have time. Unable to do it right now.
@TheBrowneTown Ай бұрын
Hey mate, the links should be working now.
@TomCollins-lq7tq Ай бұрын
can i use this footage please?
@TheBrowneTown Ай бұрын
Nah mate. Some of it is on stock footage sites though and can be licenced through there if you can find it. I upload to Blackbox who upload to sites like Pond, Adobe and I'm not sure who else. So it is available online with a licence but not through me directly.
@ShowMeWhatINeedToKnow Ай бұрын
Great vid! Just to double check something: You get the new timing belt on and release the tensioner. Then turn the engine two rotations, at the crank. And when you're done, assuming all looks well, you re-tighten the tensioner, in place -- right?
@TheBrowneTown Ай бұрын
Hey mate, been a few years since I've done this so I'd have to watch my own video again to remember. Unable to watch it ATM but I can check back later.
@ShowMeWhatINeedToKnow Ай бұрын
@@TheBrowneTown I figured it out. Thanks though. Yes, you want to rotate it a couple times, then tighten it.
@evanohia6430 Ай бұрын
Done mine on the weekend following this video. You’re a legend 👌🏽 I’ll be following ur suspension video in a couple weeks. Thanks man
@TheBrowneTown Ай бұрын
No dramas. It's one of those things that's a massive pain the first time, but next time round it won't seem so hard. Although hopefully you don't have to go in there too often.
@ShowMeWhatINeedToKnow Ай бұрын
Great vid!
@TheBrowneTown Ай бұрын
Cheers
@NaughtyGoatFarm 2 ай бұрын
Geezus what a shit design
@abstractspaces8186 2 ай бұрын
The Haynes manual for this vehicle told me it took 1.2 litres. Now I can't drive it until I get some more oil delivered 😠
@denisteddysullivan5039 Ай бұрын
Where do you get your hands on this manual. Been searching for this for a while now for my BT50 2023 mate?
@TheBrowneTown Ай бұрын
Available as online purchases or in paperback. Automotive store normally have them or can order them in (Repco, Supercheap etc.)
@umaririph 2 ай бұрын
I'm glad i came across this vlog.. will definitely visit Ille Cave and Mt. Mansilawit 🧡
@TheBrowneTown 2 ай бұрын
Have fun, El Nido is awesome :)
@cchigagzberry2696 2 ай бұрын
How many a/c actuators bt50 2016 have?
@TheBrowneTown 2 ай бұрын
It depends if they're dual climate zone or 1 climate zone. The one in the video is for dual climate zone.
@philiplucky7170 2 ай бұрын
diff breathers are you adding them
@TheBrowneTown 2 ай бұрын
There's another video on that. I raised the rear one and that's all, I explained why in the video 👍
@joeleavers 2 ай бұрын
Does this fix the AC not working on ranger driver side?
@TheBrowneTown 2 ай бұрын
Possibly, but it's not the only problem an air con system can have so I can't say for sure.
@maxbett8845 2 ай бұрын
Great vid mate. I’m considering doing a Wolfbox G900. Cheers for showing us how to pull by Bt apart 😂
@TheBrowneTown 2 ай бұрын
No dramas mate. I might have a look at that when this one fails. It has stopped working before but then it just randomly started working again a few days later.
@maxbett8845 2 ай бұрын
@@TheBrowneTown sounds about right. They’re all made in vachina
@crewzincool 2 ай бұрын
Awesome video mate . Great info
@TheBrowneTown 2 ай бұрын
No dramas.
@DiscoverJoannUltimate 2 ай бұрын
Drone alllowed to take a video in that temple?
@TheBrowneTown 2 ай бұрын
You need a permit to fly in Thailand. Don't fly over people's heads or over crowds. When I went in 2020 there were no issues but if they have put signs up saying no drones then don't fly it. I went at sunrise and waited for everyone who was praying to leave before taking off and I didn't fly over the temple. I flew from the outside and then circled it. Just be respectful and check if you need a permit.
@ggbogo935 2 ай бұрын
you're doing gods work mate thank you
@TheBrowneTown 2 ай бұрын
Haha cheers. Info should be available to everyone.