For some reason my interface is not being recognized I’ve tried almost everything if anyone can help it would be greatly appreciated
@josephschaefer91634 күн бұрын
So I can just max my duty cycle with basically no problem?
@atb10404 күн бұрын
Somebody should start a class action against these people, their software has several problems with several cars and several scenarios, will read sensors wrong and change parameters you didn't change, they don't answer their help tickets and they have no phone number So you do a build on your car and go to use their tuning stuff and you're shit out of luck because it doesn't work, so you're left with a car in your driveway that can't be tuned and it's already modified
@jasonwillette61804 күн бұрын
Sucks. Not an easy product to use. Credits? Really? I'm dumping this THING and going Diablo
@mikg36775 күн бұрын
caliber 1.8 support!
@355east36 күн бұрын
Does this require the ecu to be unlocked?
@Arken22497 күн бұрын
Would love to see on street real world 0-60 & 1/4 mile times & lap time @ VIR by Car & Driver or Road & Track.
@stangbanger93stickshiftonl38 күн бұрын
When I download drivers, it does not show a zip file.
@stangbanger93stickshiftonl38 күн бұрын
Is there a way to set this up with no vehicle?
@dkemp13379 күн бұрын
Do you absolutely need to do the cam as well or can you just tune it off?
@christophercrowe664810 күн бұрын
How about when it comes to tuning the timing? Or tuning out evap code?
@anthonypenna596110 күн бұрын
will this work on RAM 2500 trucks? 2022 year I beleive you need a security by pass
@stevelewis-sf4lw13 күн бұрын
Can't wait to fully save up to buy this, going to be getting your t87a tcm. Did a cam swap in my 18silverado5.3 oct./23 due to failed lifter and the shop I had tune it, tuned it like an ls and not running great, sucks it's my daily 😮💨
@sstevocamaro16 күн бұрын
2016 Tahoe with an L83 and 6spd automatic. Speed limiter is removed. During a WOT hwy pull the truck won’t go past 5th gear and hits a limiter in 5th gear around 3750rpm.. Is there another parameter that has to be tuned to get it to fully top out?
@TranceCarXperience2416 күн бұрын
Great stuff!
@stevepitbull20 күн бұрын
Need to buy a package for my 13 E63? How many credits needed? Thanks
@nathanhowie238722 күн бұрын
Can u do it via phone instead of laptop?
@travisjones115523 күн бұрын
Where can we get this done and how much does it cost
@bootloopgaming864225 күн бұрын
Do a crown vic
@vincer869125 күн бұрын
Can you tune Ford diesels?
@PSDGarage26 күн бұрын
So i bought credits for nothing? So i thought the whole point of buying the credits was so i can re map my car...
@ze3bar26 күн бұрын
Can you turn off the slip in a vehicle that has all wheel drive? Or is that a little bit different
@kevinmartin167928 күн бұрын
Please don't buy this scam
@ag3ntlonewolf17128 күн бұрын
hello guys, controls and special functions blanked out , my car is 2016 mustang gt, i have the latest version, i also tried the beta one, none of them worked all blanked out
@VFORCEJOHN29 күн бұрын
I think he wanted to increase the stall by +800 rpm. From 1500 to Around 2300ish. You can’t stall out at 8k
@samtuck4812Ай бұрын
Can tunes be switched while driving or do i have to be stopped?
@brucelangereis6236Ай бұрын
At 4:03 you mention the first thing to do is scan - don't you have to load the credit on to the MPVI3 first and then scan? or can you scan without a credit?
@JoeyMusgraveАй бұрын
So did the 4l80e file just appear? How do you get that file? I’m putting a 6.0 and it’s computer in another truck that has a 4l60e and at the moment I have to use the 4l60 until I’m able to convert the 4l80e to 2wd. How do I get the 4l60e file to segment swap the 4l80e?
@ssswdonАй бұрын
So I was looking at that data logging. I think it called standalone. So I had logging connected and turned on and then I saved the log file. Then when I open the log file disconnected. I don't see all the pids. I also don't see any options for loading up a channel config, thoughts
@dtbrown1978Ай бұрын
I can't get it to work for my chevy
@user-xw4hn7lb3xАй бұрын
Why no BMW tuning?
@richey1794Ай бұрын
Is it safe to adjust only the in gear?
@TheZeemeeАй бұрын
Awesomeness personified; I don't know if it's a coincidence, but Jonathan Ward and Rob Dickerson are both in Southern California and on another extraordinary level of Awesome, Thank you Gentlemen
@user-ku8sw2rm8kАй бұрын
AFM disabler plug in tool goes into the obd 2 port for $56 on eBay and or Amazon it’s great and for inspection have to unplug it and drive it for 2 or 3 days then take it in then can put it back in after that 😁
@dkemp13379 күн бұрын
Unless I buy this do it $40 a pop mobally
@Marcus_and_Pap_PapАй бұрын
Do you need a new cam to turn off the DOD
@littlevman2997Ай бұрын
No, you can shut it off with a tune alone. Only thing is, its a matter of time until you have problems with the afm lifters. To run a proper dod delete with peace of mind, a non dod cam and lifters would be the way to go with the brain tooly dod orfice plug under the vlom. Texas speed is by far the best choice to source out the complete kit to delete the dod. Talk to Ryan or anyone over their, they all know what they're talking about.
@pawes9254Ай бұрын
AEM sends shit trough analog output. Different values everyday.
@Ryan-cp4rhАй бұрын
The cost to unlock the ECM/TCM and pay for credits for a tune is the closest thing to straight robbery. We need someone else to come out and compete against HP tuners, they have the monopoly right now.
@FullThrottlePerformanceMikeАй бұрын
#TwinSnailMail
@TheRealNeoFrancoisАй бұрын
Yeah no,im definitely not buying hp tuners
@jeremyjenksАй бұрын
some day
@McBurner007Ай бұрын
KEEP WORKING ON THAT 2024 DURAMAX HD!!
@dumpsterjedi9323Ай бұрын
This is some apple levels of proprietary bullshit
@sambaaam7268Ай бұрын
What?? was this helpful? NO!
@ayyedalmudhafer1032Ай бұрын
Thanks ❤
@richardmathern900Ай бұрын
Nice seats in the Jimmy who made them?
@dannys5395Ай бұрын
You forgot to include the starter diag disable.
@danielboekweg2919Ай бұрын
??? Trying to do this on my car. Is there something he missed that would apply to 2004 buick regal?
@dannys539521 күн бұрын
@@danielboekweg2919 On GEN 3 stuff no but on Gen 4-5 there is also a starter disable/enable you need to check so the starter works.
@rockerby97729 күн бұрын
@@dannys5395hi sorry to bug ya but you mentioned gen iv stuff and im trying to one one rn but under general theres no security tab? Does it still have vats?
@willytoner161Ай бұрын
That was very helpful
@GlofilterАй бұрын
Hey Tony- I hope you see this. I have a Jaguar F-Type R (supercharged 5.0 V8 that looks to be the Mustang's British cousin) that appears to use the same ECU as this Ford you are tuning in this video because the parameters are very similar. I noticed that some of the tools you have for the Ford are missing for the Jag. Specifically, speed density calculator, ETC effective area calculator, and torque inverse calculator. Is there a way I can turn those tools on, once I figure out how to use them? I haven't found any good sources for Jag tuning instruction, so I'm piecing together things from this video and others. By chance, can you direct me somewhere for a good jag tuning class or tutorials?
@dwaynepettis6545Ай бұрын
8k on the stall is a no go. Every time I forget and adjust it I get a what did you do!