Thanks for this bro 🙏🏾

Thanks so much! I'm hoping I can do this myself with my dishwasher. It tries to tip out every time I pull out the bottom rack for loading, so I've been just reaching in and loading dishes, which is not so effective.

How is it these makers can't put a grass flap or blocker on these 12k 13k $ mowers!??

Do you sand the tool a lil before you paint it?

Thanks. Although I should probably have known better, I thought there was something 'different' about halogen bulbs. I have one that looks perfect to the eye, but is clearly open circuit when tested with a multimeter.

This tv comes with wrong screws for the mounting into drywall dolly also. Awful

I tried the T1’s. I wear FXD WP5’s in the summer. When you’re used to pocket configuration it’s hard to switch. I would have like the T1 if the cell phone pocket was deeper. My iPhone 15 sticks out too much. I don’t like Velcro either and the FXD have Velcro cargo pockets on both sides but never use the them. What I use a lot and it’s the game changer is the Velcro cargo pockets have open pockets as well. My wallet and cell phone fit well in these open pockets and ez access. I would have liked to seen them in the T1’s.

I was interested in this and thanks to your video, I'm gonna stick to the classic self bleeder technique. Had my 6 year old pump the brakes while I cracked the bleeder. To hell with all these "fancy" tools

great video!

Thanks for the tip

Get you a pull behind lawn Sweeper they work great

That idea of drilling 2 or 3 1/8 holes >2-3 gpm in the bottom of 5 gallon bucket is appropriate flow rate for absorption for trees and has been around for years. Too much flow is not good. 😊

Just got a pair and I’m not sure if I’m going to keep them. Been wearing FXD’s and I like the pockets better. Also I’m not sure of the durability. The cell phone pocket could definitely be deeper, an iPhone 15 should have to stick out.

not a service call pouch. but would be good for small installation work. like fitting garden lights

What if you connect to an outlet with 220v? Does the meter have a protection fuse? or it just can read the 220 without any issue?

What if you connect to an outlet with 220v? Does the meter have a protection fuse? or it just can read the 220 without any issue?

I would love it if it can indicate in some way if there is a high voltage between neutral-ground. it reads out individual values of hot-neutral, hot-ground, and neutral-ground?

What if you connect to an outlet with 220v? Does the meter have a protection fuse? or it just can read the 220 without any issue?

Damn i should have check it out before i just spent almost $400 for a used one with one battery

I have a Little Giant Safety Step, 3 step model (Jumbo Step now), I use it getting in and out of my camper (and home projects too). It's like stair step treads. Wide and stable. Quite a few people ask about it and say theyre going to buy one as soon as they get home. I like that you're making them out of fiberglass now.

Should the tube turn red or no. I have a tube heater doesn’t turn red. Why and ty

For anyone searching...That stihl helmet is $66 at your local Ace hardware or stihl dealer right now(6/1/24). They are the same price point. I bought that stihl years ago with ratcheting suspension and it has been great, I love it. The face shield is longer, yes the muffs snap in hard but are positive and keep noise out while moving. I recently needed a second helmet and chaps and cheaped out with the "Forester" brand basic helmet. It sucks, the muffs suck, don't stay up, even harder to snap onto your ear, and the visor doesn't stay up or down properly and is too short and you get hit in the neck with flying debris. I should have bought another Stihl.

can you attach a clamp on the back with a magnet? so you can attach it to a panel or something while taking measurements.

you are a good teacher bro!!

so you fluid now contaminated with Vaseline?

Thank you for the explanation and the simple tutorial!

piece of garbage i bough one and worse decision i made

Alguiem lo tiene en peru

I fertilize about 1 1/2 acres of grass, and struggle to find an exact setting for the Scott's turf builder. Usually, it's somewhere between 1 and 2, but it's so sensitive, I have to REALLY tighten the wing nut to keep it from moving. When you throw the handle, you have to be real careful that it doesn't nudge the adjustment slide, at all. I tow with a lawn tractor, and can't reach back to the shutoff arm, and wind up spreading fertilizer on the driveway because I keep my speed constant, to get an even application. I've thought about the linear actuator, but the expense and hassle of wiring it in is keeping me from doing that mod.

I bought one today based on your video. Thanks for posting!

The side screw method didn't work for me. It was a gaping hole into cabinet where there should have been metal. Couldn't even use a washer because off the cap. I don't know if the original installer did something funky to make it fit but yeah, no luck. It is a modern unit as well. I ended up having to just use powergrab caulk on the hinges because it was the only option. Seems to be holding up. I am not screwing around messing with a 2k slab off granite.

I have one. It is great for towing my camper offroad. I have no trouble pulling mine out of the receiver on the truck.

They cost $100 and don't cover your knees haha

Paneling you can see the nails. Someone on KZfaq suggested this, with drywall just shine a light on it. You may not need a stud finder tool.

Thank you

Probably the reset button in your refrigerator is on the left in a white plastic case with a small hole for a toothpick. You should insert a toothpick there and press lightly. Approximately three to five seconds. You will feel the microswitch operate under the end of the toothpick. When you hear a faint beep, close the ice compartment door and close the main door. After a while, the ice maker will start producing ice. Вероятно, кнопка сброса в вашем холодильнике находится слева в белом пластиковом корпусе с небольшим отверстием для зубочистки. Туда следует вставить зубочистку и слегка нажать. Примерно три-пять секунд. Вы почувствуете, как срабатывает микропереключатель под концом зубочистки. Когда вы услышите слабый звуковой сигнал, закройте дверцу отделения для льда и закройте главную дверцу. Через некоторое время льдогенератор начнет производить лед.

Next Video: ‘10 Worst Things About 1st Class Air Travel’

This is called Humblebragging

Lmao you look like you can harder use it. Also, how long does it take to listen to you BS until you finally show it? Jesus fuckin Christ!

Great video. Semper Fi

Thanks buddy. Got mine sorted out after watching this 👌

Best on the internet for explaining how to cut this molding and measuring

The stupid chain on the red flapper gets stuck or wrap around and doesn’t close right then the toilet runs and doesn’t fill

Bro it's $1,498 now on Sale for $1,198 this is crazy 🤪 idk but this economy has gone to shit. Excuse my words

Sherpa seat belt protectors from Walmart they come in black and cost around 2$ each also one inch garden knee pad the flat one harbor freight has a great one zip tie it to the back its much better it cost around 5$ this modification helps me a lot i only add 3 gallons to mine...

Wondering if you ever added a water pressure regulator as I would think normal water pressure would be too much.

I just watched your video with some ‘buyers regret’ as I’d just loaded the thing up, and it is HEAVY! I tried getting it in my truck, I did it, but it was HORRIBLE! And this is going to be at least a once a day thing, maybe more! I found some folding aluminium ramps that are sort of ‘sprung’ in the middle. MAN it is so easy! Even with a crate on chest, and a screw organiser on that ( load right up) it just rolls in and out super easy! Getting out is easier than in, as sometimes if you ‘hesitate’ handle wants to fold back in, but with a committed push straight in, pretty effortless. Tomorrow is a trial run on job site, but theoretically, everything I use, is deployed in one hit, and ramps really are seconds to deploy and stow. My gut feeling is, I’m on to a winner! And I scored CHEST for $135 USD RAMPS were about $95 Fingers crossed

Thumbs up !! Tape is my last resort,Pawn shop special lol😅

Excellent video. I've had the same treatment from Husqvarna. They accept responsibility for nothing, except depositing your money.

If I pumped river water instead of house water, would my new tree enjoy it more?