Thanks a lot for making great components! Keep it up with these videos.

Only If you Identify as Water meters?, Good video, Nordic has great products nRF52840, nRF5340 and the nRF7002 WiFi are Visionary for power consumption and battery life. Great Achievements. 😛✌

This is GREAT! They actually keep stuff up to date... Clinic.💪😎

Hi thanks for this tip, I work with Nordic boards too. Just came across this, what is the energy consumption by using this method to get a distance ?

希望可以增加字幕, 对于英文不好的人来说更容易看懂. thks

Thanks for this wonderful webinar. Excellent work. I want to know that if I make one of my controller provisioned node then how can I make it again un-provisioned node without using nrf-mesh mobile application. Is there any api to do so or any other way i want to write a code for this case

Hello, I need to develop a very small code that doesn't use the module conf_bt_peripheral, is it possible to create a bluetooth receiver without this configuration? it will overflow my memory. The final goal is just to receive a byte and turn a red or a green light.

@2:50 since when is 8 dBm a high output power? that's incredibly weak, what's going on with this video

@2:12 why did you say it uses 400 MHz but in the slide it says 900 MHz?

能不能加上字幕, 英文听着,太费劲了.

希望可以增加字幕 英语不好的人, 也能看懂.

这个插件可以给stm32开发使用吗?

Is it possible to install the nRF Connect extension for VScodium? I prefer more private IDE without telemetry.

d:/Work/nordic_prjs/blinky3.0 doesn't contain a CMakeLists.txt Iam stuck with this error during the build configuration process. What can be done?

Hi there, That was Great, I want to know if any plans exist to EXPAND on the FMD info and webinars available. Are there more examples of this Awesome feature.

Great update. Thank you for sharing.

Seems like a cool device.

I really enjoyed this format! Keep up the good work 👍

What is the longest chain of consecutive relay nodes allowed or possible? Also, the claim for many years of battery life is a bit hard to grasp in the case of nodes acting as relay or sink nodes because these devices apparently will be always active and trafficking data back and forth. So is this claim still valid for these nodes?

Would be nice if the mesh network (ie. above the PHY level) were free, or at least have transparent pricing, instead of the "get in touch" stuff.

Thanks for the video but if I follow the same steps with the nrf9160 SICA B1 and the AT client example.. don't work.. could you help me? C:/ncs/v2.6.1/nrf/lib/at_host/at_host.c:40:46: note: in expansion of macro 'DEVICE_DT_GET' 40 | static const struct device *const uart_dev = DEVICE_DT_GET(DT_NODELABEL(uart0));

West @ 36:58

Go Zephyr Go!

I have connected a custom board that has nrf9160 chip with FDTI cable. Through serial monitors I am able to transmit AT commands. Means the board connects and works But at VS code when I follow this tutorial after building it shows "No Device found" in the Connected Devices.

Could you recommend any posts or tutorials on phase calibration that Nordic particularly suggests? In other words, how should I use the reference samples? I've come across a variety of phase calibration schemes, but none of them detail the use of reference samples. I'm sorry I'm new to this, so finding information that's useful to me is a bit challenging...Thanks !

Hello I'm having issues with Visual Studio Code and the nrf SDK. I followed your tutorial as instructed and installed the application as administrator on both windows 10 and 11 (and insatalled the nordic SDK software and command line tools and j-link drivers (just like your videos). I installed the toolchain and a matching sdk (i tried v2.5.1 and v2.6.1) then successfully made a build configuration for my nRF52840 DK I made sure to keep the install paths close to the root directory But VS code does not recognize my board. Under connected devices it detects a connected device with numbers like "10040086720" but does not say "nRF52840 DK" like yours does. I cannot flash the application with errors saying: "ERROR: No debuggers were discovered. NOTE: For additional output, try running again with logging enabled (--log). NOTE: Any generated log error messages will be displayed. FATAL ERROR: command exited with status 41: nrfjprog --program 'c: ordic\projects\blinky_pwm\build\zephyr\zephyr.hex' --chiperase --verify -f NRF52 --snr 1050203242" Please help I need this project to work its very important and there is ZERO help anywhere for this.

10 led i want to control from ble mesh so their will be 10 server and one client ?

Hey Nordic! Just wanted to ask if the issues using nrfconnect on apple silicon macs have been resolved, or is it still necessary to run vscode in intel mode?

Hello, I use custom board using nrf52840 and gonna program with swd on jlink Anyways what is my question is because I use custom board what board I need to select make it work or is there a board I can select by default for nrf52840

Does nRF54 support LLPM, in which connection interval can be lowered to 1 ms?

Nothing exciting. We have been using keil to develop most of our products for many years, but now it does not support the keil compiler. For the sake of product stability, we do not plan to ask engineers to re-analyze other development tools, which will add additional costs. Our risk and cost. We plan to use other chips for the next product. We are very disappointed with nrf connect sdk.

Hi, thank for your sharing, but I have a question, How can I get the access to ant-nrfconnect?

My company was looking for a highly integrated LTE module with built-in GPS, and nRF9160 met the requirements. Until they realized it runs on zephyr, and no one in the company worked with Zephyr before. It was canceled, still looking for an alternative with a built-in application processor.

Great video, What is the bootloader and bootloader version onboard used here?

Are there any guides on how to set up matter from scratch? I already have quite a complex firmware that was ported to nRF5340 and I need to add Matter over Thread on it, but I only see documentation for starting new firmware taking the samples as a base.

This is a great video and in conjunction with the DevAcademy course really helped me understand the process a lot better. If I wanted to incorporate this into my own app (vs nrf Connect mobile), how would I do that?

How can I use BLE mesh for messaging between two mobile in mesh network.

Do you have this for nRF9161 which came with a onomondo SIM card?

Thank you, is very helpful. But one question is still open for me. Why there is no option connect to nRF52 chip (not DK) via onboard normal BLE Adapter not Nordic Dongle. Or I misunderstood?

The terminal process terminated with exit code: 41. * Terminal will be reused by tasks, press any key to close it. what is the cause of above error in vscode when flashing new application

Bad audio mix, music way too loud.

he didn't say "stuff"

Hello, I'm implementing nmp1300 in my project but there is a lack of information how to do it with SES. I didn't find an example in nordic website. Is there any specific documentation for cases like mine?

Hi Martin, are all these features also available when we use AT commands?

Can this be done with a higher frequency to achieve greater accuracy? Also, can it be adapted to operate with 2 "base units" to calculate a 2-D position or 3 units to compute a 3-D position?

Hello, this is Fabio, my doubt, about application, i need use LTE, but i need too minimum 3000kpbs to work well, will be used telemetry of automation and one camera. per station.

Useful information but the sound quality is very bad.

Useful information but the sound quality is very bad.

Why do I get ads about this thing? I am not doing hardware. Make it soft please.

Is there a more detailed video going through the sensor demo for Amazon sidewalk? I have been having some trouble getting my setup working, specifically with the Nordic SDK.